403 research outputs found
Magnetic field structure of the extended 3C 380 jet
An earlier study of the complex jet of 3C 380 by Papageorgiou et al. revealed total intensity and polarization structure associated with a bright knot K1 about 0.7 arcsec from the core that was reminiscent of that expected for a conical shock wave. In this new study, 1.42, 1.66 and 4.99 GHz total intensity, polarization and Faraday rotation images are presented and analysed. These images were derived from observations with the Very Long Baseline Array plus one antenna of the Very Large Array, obtained in 2006 March. These new images confirm the overall magnetic field structure of the knot K1 indicated in the earlier observations. In addition, a clear Faraday rotation gradient has been detected across the jet, extending roughly from 10 to 30 mas (70–200 pc) along the jet from the core (a radial distance of approximately two beamwidths). The gradient spans roughly 3.5 beamwidths in the transverse direction, and the difference in the rotation measures on either side of the jet is 4–5σ, demonstrating that the detection of the gradient is firm. We interpret this transverse Faraday rotation gradient as reflecting systematic variation of the line-of-sight component of a helical or toroidal magnetic field (B) associated with the jet of 3C 380. These results provide evidence that the helical field arising due to the joint action of the rotation of the central black hole and its accretion disc and the jet outflow can survive to distances of hundreds of parsecs from the central engine
Estimation of Timing Resolution for Very Fast Time-Of-Flight Detectors in Monte Carlo Simulations
In PET imaging the depth of absorption in the
crystal contributes to the detection time uncertainty, which
impacts the time resolution of the scatter. In addition, affects
the nature of the timing distribution. It was found that when
Photon Travel Spread (PTS) in the crystal is the only factor
affecting the timing uncertainty, in which case, a Laplace kernel
might describe the measured data, more accurately. It was shown
that for crystals as thin as 20 mm the RMSE of the Laplace was
smaller than that of a Normal. While when PTS is combined
with an addition coincidence detection resolution (CDR) then,
a Normal achieves better RMSE, but with dependency on the
crystal size. Results in terms of CRC, of a simulated NEMA
phantom, confirmed that reconstruction using a Laplace kernel
can model the data better for thicker crystals
Audio Tactile Maps (ATM) System for the Exploration of Digital Heritage Buildings by Visually-impaired Individuals - First Prototype and Preliminary Evaluation
P.I. Dr. Lorenzo Piccinali, Faculty of Technology, DMUNavigation within historic spaces requires analysis of a variety of acoustic, proprioceptive and tactile cues; a task that is well-developed in many visually-impaired individuals but for which sighted individuals rely almost entirely on vision. For the visually-impaired, the creation of a cognitive map of a space can be a long process for which the individual may repeat various paths numerous times. While this action is typically performed by the individual on-site, it is of some interest to investigate to what degree this task can be performed off-site using a virtual simulator. We propose a tactile map navigation system with interactive auditory display. The system is based on a paper tactile map upon which the user’s hands are tracked. Audio feedback provides; (i) information on user-selected map features, (ii) dynamic navigation information as the hand is moved, (iii) guidance on how to reach the location of one hand (arrival point) from the location of the other hand (departure point) and (iv) additional interactive 3D-audio cues useful for navigation. This paper presents an overview of the initial technical development stage, reporting observations from preliminary evaluations with a blind individual. The system will be beneficial to visually impaired visitors to heritage sites; we describe one such site which is being used to further assess our prototype
The magnetic field and geometry of the oblique shock in the jet of 3C 346
We investigate the brightest regions of the kpc-scale jet in the powerful
radio galaxy 3C 346, using new optical HST ACS/F606W polarimetry together with
Chandra X-ray data and 14.9 GHz and 22.5 GHz VLA radio polarimetry. The jet
shows a close correspondence in optical and radio morphology, while the X-ray
emission shows an 0.80 +/- 0.17 kpc offset from the optical and radio peak
positions. Optical and radio polarimetry show the same apparent magnetic field
position angle and fractional polarization at the brightest knot, where the jet
undergoes a large kink of almost 70 degrees in the optical and radio images.
The apparent field direction here is well-aligned with the new jet direction,
as predicted by earlier work that suggested the kink was the result of an
oblique shock. We have explored models of the polarization from oblique shocks
to understand the geometry of the 3C 346 jet, and find that the upstream flow
is likely to be highly relativistic (0.91 +0.05 / -0.07 c), where the plane of
the shock front is inclined at an angle of 51 (+/- 11) degrees to the upstream
flow which is at an angle 14 (+8 / -7) degrees to our line of sight. The actual
deflection angle of the jet in this case is only 22 degrees.Comment: 11 pages, 5 figures. Accepted by MNRA
Analysing the Transverse Structure of the Relativistic Jets of AGN
This paper describes a method of fitting total intensity and polarization profiles in VLBI images of astrophysical jets to profiles predicted by a theoretical model. As an example, the method is used to fit profiles of the jet in the Active Galactic Nucleus Mrk501 with profiles predicted by a model in which a cylindrical jet of synchrotron plasma is threaded by a magnetic field with helical and disordered components. This fitting yields model Stokes Q profiles that agree with the observed profiles to within the 1-2 \sigma uncertainties; the I model and observed profiles are overall not in such good agreement, with the model I profiles being generally more symmetrical than the observed profiles. Consistent fitting results are obtained for profiles derived from 6cm VLBI images at two distances from the core, and also for profiles obtained for different wavelengths at a single location in the VLBI jet. The most striking success of the model is its ability to reproduce the spine-sheath polarization structure observed across the jet. Using the derived viewing angle in the jet rest frame, \delta' approximately 83 degrees, together with a superluminal speed reported in the literature, \beta apparent = 3.3, yields a solution for the viewing angle and velocity of the jet in the observer's frame \delta degrees and \beta approximately 0.96. Although these results for Mrk501 must be considered tentative, the combined analysis of polarization profiles and apparent component speeds holds promise as a means of further elucidating the magnetic field structures and other parameters of parsec-scale AGN jets
A caspase-3 'death-switch' in colorectal cancer cells for induced and synchronous tumor apoptosis in vitro and in vivo facilitates the development of minimally invasive cell death biomarkers
Novel anticancer drugs targeting key apoptosis regulators have been developed and are undergoing clinical trials. Pharmacodynamic biomarkers to define the optimum dose of drug that provokes tumor apoptosis are in demand; acquisition of longitudinal tumor biopsies is a significant challenge and minimally invasive biomarkers are required. Considering this, we have developed and validated a preclinical 'death-switch' model for the discovery of secreted biomarkers of tumour apoptosis using in vitro proteomics and in vivo evaluation of the novel imaging probe [ 18 F]ML-10 for non-invasive detection of apoptosis using positron emission tomography (PET). The 'death-switch' is a constitutively active mutant caspase-3 that is robustly induced by doxycycline to drive synchronous apoptosis in human colorectal cancer cells in vitro or grown as tumor xenografts. Deathswitch induction caused caspase-dependent apoptosis between 3 and 24 hours in vitro and regression of 'death-switched' xenografts occurred within 24 h correlating with the percentage of apoptotic cells in tumor and levels of an established cell death biomarker (cleaved cytokeratin-18) in the blood. We sought to define secreted biomarkers of tumor apoptosis from cultured cells using Discovery Isobaric Tag proteomics, which may provide candidates to validate in blood. Early after caspase-3 activation, levels of normally secreted proteins were decreased (e.g. Gelsolin and Midkine) and proteins including CD44 and High Mobility Group protein B1 (HMGB1) that were released into cell culture media in vitro were also identified in the bloodstream of mice bearing death-switched tumors. We also exemplify the utility of the death-switch model for the validation of apoptotic imaging probes using [ 18 F]ML-10, a PET tracer currently in clinical trials. Results showed increased tracer uptake of [ 18 F]ML-10 in tumours undergoing apoptosis, compared with matched tumour controls imaged in the same animal. Overall, the death-switch model represents a robust and versatile tool for the discovery and validation of apoptosis biomarkers. © 2013 Macmillan Publishers Limited. All rights reserved
iShocks: X-ray binary jets with an internal shocks model
In the following paper we present an internal shocks model, iShocks, for
simulating a variety of relativistic jet scenarios; these scenarios can range
from a single ejection event to an almost continuous jet, and are highly user
configurable. Although the primary focus in the following paper is black hole
X-ray binary jets, the model is scale and source independent and could be used
for supermassive black holes in active galactic nuclei or other flows such as
jets from neutron stars. Discrete packets of plasma (or `shells') are used to
simulate the jet volume. A two-shell collision gives rise to an internal shock,
which acts as an electron re-energization mechanism. Using a pseudo-random
distribution of the shell properties, the results show how for the first time
it is possible to reproduce a flat/inverted spectrum (associated with compact
radio jets) in a conical jet whilst taking the adiabatic energy losses into
account. Previous models have shown that electron re-acceleration is essential
in order to obtain a flat spectrum from an adiabatic conical jet: multiple
internal shocks prove to be efficient in providing this re-energization. We
also show how the high frequency turnover/break in the spectrum is correlated
with the jet power, , and the
flat-spectrum synchrotron flux is correlated with the total jet power,
. Both the correlations are in
agreement with previous analytical predictions.Comment: 13 pages, 17 figures, 5 tables. Accepted for publication in MNRA
X-ray Properties of the GigaHertz-Peaked and Compact Steep Spectrum Sources
We present {\it Chandra} X-ray Observatory observations of Giga-Hertz Peaked
Spectrum (GPS) and Compact Steep Spectrum (CSS) radio sources. The {\it
Chandra} sample contains 13 quasars and 3 galaxies with measured 2-10 keV X-ray
luminosity within erg s. We detect all of the
sources, five of which are observed in X-ray for the first time. We study the
X-ray spectral properties of the sample. The measured absorption columns in the
quasars are different than those in the galaxies in the sense that the quasars
show no absorption (with limits ) while the galaxies
have large absorption columns () consistent with
previous findings. The median photon index of the sources with high S/N is
and it is larger than the typical index of radio loud
quasars. The arcsec resolution of {\it Chandra} telescope allows us to
investigate X-ray extended emission, and look for diffuse components and X-ray
jets. We found X-ray jets in two quasars (PKS 1127-145, B2 0738+32), an X-ray
cluster surrounding a CSS quasar (z=1.1, 3C 186), detected a possible binary
structure in 0941-080 galaxy and an extended diffuse emission in galaxy PKS B2
1345+12. We discuss our results in the context of X-ray emission processes and
radio source evolution. We conclude that the X-ray emission in these sources is
most likely unrelated to a relativistic jet, while the sources' radio-loudness
may suggest a high radiative efficiency of the jet power in these sources.Comment: 15 pages, to be published in Ap
- …