627 research outputs found
Analytic estimates and topological properties of the weak stability boundary
The weak stability boundary (WSB) is the transition region of the phase space where the change from gravitational escape to ballistic capture occurs. Studies on this complicated region of chaotic motion aim to investigate its unique, fuel saving properties to enlarge the frontiers of low energy transfers. This âfuzzy stabilityâ region is characterized by highly sensitive motion, and any analysis of it has been carried out almost exclusively using numerical methods. On the contrary this paper presents, for the planar circular restricted 3 body problem (PCR3BP), 1) an analytic definition of the WSB which is coherent with the known algorithmic definitions; 2) a precise description of the topology of the WSB; 3) analytic estimates on the âstable regionâ (nearby the smaller primary) whose boundary is, by definition, the WSB
Humidification Factors from Laboratory Studies of Fresh Smoke from Biomass Fuels
Measurements of smoke aerosol humidification factors were performed in a laboratory for different biomass fuel types and burn conditions. Two nephelometers simultaneously measured dry and humidified light scattering coefficients (bsp(dry) and bsp(RH), respectively), providing the first observations of the temporal evolution of the humidification factor (f(RH) = bsp(RH)/bsp(dry)) for fresh (minutes-old) smoke. Hygroscopic characteristics of the smoke aerosols varied with fuel type and fire conditions, with the mean f(RH) ranging from 1.01 to 1.95 for fresh minutes-old smoke for the relative humidity (RH) range of 70-94%. These f(RH) values exhibited temporal variability, with some fuels alternating from hygroscopic to nonhygroscopic within minutes. Humidograms were also obtained, demonstrating that smoke from different fuels begins to take up water at different RH values. Humidification factors for hour-old smoke ranged from 1.10 to 1.51 for RH \u3e 90%. Finally, light-absorbing carbon mass measured with a multiwavelength aethalometer demonstrated different spectral responses as a function of fuel type. These laboratory experiments demonstrate the complexity of smoke hygroscopicity from young fires and are essential for understanding the radiative effects of biomass burning in the ambient atmosphere
Towards closing the gap between hygroscopic growth and activation for secondary organic aerosol: Part 1 â Evidence from measurements
Secondary Organic Aerosols (SOA) studied in previous laboratory experiments generally showed only slight hygroscopic growth, but a much better activity as a CCN (Cloud Condensation Nucleus) than indicated by the hygroscopic growth. This discrepancy was examined at LACIS (Leipzig Aerosol Cloud Interaction Simulator), using a portable generator that produced SOA particles from the ozonolysis of <i>α</i>-pinene, and adding butanol or butanol and water vapor during some of the experiments. The light scattering signal of dry SOA-particles was measured by the LACIS optical particle spectrometer and was used to derive a refractive index for SOA of 1.45. LACIS also measured the hygroscopic growth of SOA particles up to 99.6% relative humidity (RH), and a CCN counter was used to measure the particle activation. SOA-particles were CCN active with critical diameters of e.g. 100 nm and 55 nm at super-saturations of 0.4% and 1.1%, respectively. But only slight hygroscopic growth with hygroscopic growth factors &le;1.05 was observed at RH<98% RH. At RH>98%, the hygroscopic growth increased stronger than would be expected if a constant hygroscopicity parameter for the particle/droplet solution was assumed. An increase of the hygroscopicity parameter by a factor of 4â6 was observed in the RH-range from below 90% to 99.6%, and this increase continued for increasingly diluted particle solutions for activating particles. This explains an observation already made in the past: that the relation between critical super-saturation and dry diameter for activation is steeper than what would be expected for a constant value of the hygroscopicity. Combining measurements of hygroscopic growth and activation, it was found that the surface tension that has to be assumed to interpret the measurements consistently is greater than 55 mN/m, possibly close to that of pure water, depending on the different SOA-types produced, and therefore only in part accounts for the discrepancy between hygroscopic growth and CCN activity observed for SOA particles in the past
3D-Printing and Machine Learning Control of Soft Ionic Polymer-Metal Composite Actuators
This paper presents a new manufacturing and control paradigm for developing soft ionic polymer-metal composite (IPMC) actuators for soft robotics applications. First, an additive manufacturing method that exploits the fused-filament (3D printing) process is described to overcome challenges with existing methods of creating custom-shaped IPMC actuators. By working with ionomeric precursor material, the 3D-printing process enables the creation of 3D monolithic IPMC devices where ultimately integrated sensors and actuators can be achieved. Second, Bayesian optimization is used as a learning-based control approach to help mitigate complex time-varying dynamic effects in 3D-printed actuators. This approach overcomes the challenges with existing methods where complex models or continuous sensor feedback are needed. The manufacturing and control paradigm is applied to create and control the behavior of example actuators, and subsequently the actuator components are combined to create an example modular reconfigurable IPMC soft crawling robot to demonstrate feasibility. Two hypotheses related to the effectiveness of the machine-learning process are tested. Results show enhancement of actuator performance through machine learning, and the proof-of-concepts can be leveraged for continued advancement of more complex IPMC devices. Emerging challenges are also highlighted
Measured and modeled humidification factors of fresh smoke particles from biomass burning: role of inorganic constituents
During the 2006 FLAME study (<b>F</b>ire <b>L</b>aboratory <b>a</b>t <b>M</b>issoula <b>E</b>xperiment), laboratory burns of biomass fuels were performed to investigate the physico-chemical, optical, and hygroscopic properties of fresh biomass smoke. As part of the experiment, two nephelometers simultaneously measured dry and humidified light scattering coefficients (<i>b</i><sub>sp(dry) </sub> and <i>b</i><sub>sp(RH)</sub>, respectively) in order to explore the role of relative humidity (RH) on the optical properties of biomass smoke aerosols. Results from burns of several biomass fuels from the west and southeast United States showed large variability in the humidification factor (<i>f</i>(RH)=<i>b</i><sub>sp(RH)</sub>/<i>b</i><sub>sp(dry)</sub>). Values of <i>f</i>(RH) at RH=80â85% ranged from 0.99 to 1.81 depending on fuel type. We incorporated measured chemical composition and size distribution data to model the smoke hygroscopic growth to investigate the role of inorganic compounds on water uptake for these aerosols. By assuming only inorganic constituents were hygroscopic, we were able to model the water uptake within experimental uncertainty, suggesting that inorganic species were responsible for most of the hygroscopic growth. In addition, humidification factors at 80â85% RH increased for smoke with increasing inorganic salt to carbon ratios. Particle morphology as observed from scanning electron microscopy revealed that samples of hygroscopic particles contained soot chains either internally or externally mixed with inorganic potassium salts, while samples of weak to non-hygroscopic particles were dominated by soot and organic constituents. This study provides further understanding of the compounds responsible for water uptake by young biomass smoke, and is important for accurately assessing the role of smoke in climate change studies and visibility regulatory efforts
Affective Correlates of Stimulant Use and Adherence to Anti-retroviral Therapy Among HIV-positive Methamphetamine Users
The use of stimulants has important implications for HIV prevention and care. However, few investigations have examined psychological correlates of substance use and adherence to anti-retroviral therapy (ART) among HIV-positive stimulant users. This cross-sectional investigation examined affective correlates of stimulant use and ART adherence among HIV-positive methamphetamine users. In total, 122 HIV-positive men who have sex with men or transgendered individuals on ART who reported using methamphetamine in the past 30Â days were recruited from the community. HIV-specific traumatic stress was consistently and independently associated with more frequent cocaine/crack use (but not with methamphetamine use). Positive affect was independently associated with a decreased likelihood of reporting any injection drug use and an increased likelihood of reporting perfect ART adherence. HIV-specific traumatic stress may be an important determinant of increased cocaine/crack use in this population. Positive affect may increase the likelihood that individuals will refrain from injection drug use and achieve high levels of ART adherence
Beta-hemolytic Streptococcus dysgalactiae strains isolated from horses are a genetically distinct population within the Streptococcus dysgalactiae taxon
The pathogenic role of beta-hemolytic Streptococcus dysgalactiae in the equine
host is increasingly recognized. A collection of 108 Lancefield group C (nâ=
96) or L (nâ=â12) horse isolates recovered in the United States and in three
European countries presented multilocus sequence typing (MLST) alleles,
sequence types and emm types (only 56% of the isolates could be emm typed)
that were, with few exceptions, distinct from those previously found in human
Streptococcus dysgalactiae subsp. equisimilis. Characterization of a subset of
horse isolates by multilocus sequence analysis (MLSA) and 16S rRNA gene
sequence showed that most equine isolates could also be differentiated from S.
dysgalactiae strains from other animal species, supporting the existence of a
horse specific genomovar. Draft genome information confirms the
distinctiveness of the horse genomovar and indicates the presence of
potentially horse-specific virulence factors. While this genomovar represents
most of the isolates recovered from horses, a smaller MLST and MLSA defined
sub-population seems to be able to cause infections in horses, other animals
and humans, indicating that transmission between hosts of strains belonging to
this group may occur
- âŠ