Optical frequency tripling with improved suppression and sideband selection

Journal Article, Impact factor:3.749A novel optical dispersion tolerant millimetre-wave radio-over-fibre system using optical frequency tripling technique with enhanced and selectable sideband suppression is demonstrated. The implementation utilises cascaded optical modulators to achieve either an optical single sideband (OSSB) or double sideband-suppressed carrier (DSB-SC) signal with high sideband suppression. Our analysis and simulation results indicate that the achievable suppression ratio of this configuration is only limited by other system factors such as optical noise and drifting of the operational conditions. The OSSB transmission system performance is assessed experimentally by the transport of 4 WiMax channels modulating a 10 GHz optical upconverted RF carrier as well as for optical frequency doubling and tripling. The 10 GHz and tripled carrier at 30 GHz are dispersion tolerant resulting both in an average relative constellation error (RCE) of -28.7 dB after 40 km of fibre. (C)2011 Optical Society of AmericaFundação para a Ciência e Tecnologi

Thou Shalt is not You Will

In this paper we discuss some reasons why temporal logic might not be suitable to model real life norms. To show this, we present a novel deontic logic contrary-to-duty/derived permission paradox based on the interaction of obligations, permissions and contrary-to-duty obligations. The paradox is inspired by real life norms

Phase diagram of a model for a binary mixture of nematic molecules on a Bethe lattice

We investigate the phase diagram of a discrete version of the Maier-Saupe model with the inclusion of additional degrees of freedom to mimic a distribution of rodlike and disklike molecules. Solutions of this problem on a Bethe lattice come from the analysis of the fixed points of a set of nonlinear recursion relations. Besides the fixed points associated with isotropic and uniaxial nematic structures, there is also a fixed point associated with a biaxial nematic structure. Due to the existence of large overlaps of the stability regions, we resorted to a scheme to calculate the free energy of these structures deep in the interior of a large Cayley tree. Both thermodynamic and dynamic-stability analyses rule out the presence of a biaxial phase, in qualitative agreement with previous mean-field results

Active swarms on a sphere

Here we show that coupling to curvature has profound effects on collective motion in active systems, leading to patterns not observed in flat space. Biological examples of such active motion in curved environments are numerous: curvature and tissue folding are crucial during gastrulation, epithelial and endothelial cells move on constantly growing, curved crypts and vili in the gut, and the mammalian corneal epithelium grows in a steady-state vortex pattern. On the physics side, droplets coated with actively driven microtubule bundles show active nematic patterns. We study a model of self-propelled particles with polar alignment on a sphere. Hallmarks of these motion patterns are a polar vortex and a circulating band arising due to the incompatibility between spherical topology and uniform motion - a consequence of the hairy ball theorem. We present analytical results showing that frustration due to curvature leads to stable elastic distortions storing energy in the band.Comment: 5 pages, 4 figures plus Supporting Informatio

Optical Techniques for Defect Evaluation in Vehicles

The optical techniques are a powerful tool on situations where either the physical contact or invasive techniques for evaluation are not suitable. Vehicle environments constitute an application field for the optical techniques and are the focus of this chapter. In order to reinforce this kind of techniques, it must be clarified that the idea to manipulate the light backs to the second century before our age, when Archimedes planned to destroy enemy ships using a solar heat ray with an array of actuators to change the shape of a mirror (Bifano T., 2011). Therefore, the field of photonics is the one that offers the possibility to achieve one of the greatest realizations and applications because the light is present in all aspects of the human life and our way of living is impossible without light (Carmo J. P. et al., 2012a). Optical measurement systems are also suitable for harsh monitorization because they are non-contact and full-field techniques. This is the case of Moiré Interferometry, which is used for many optoelectronic applications as displacement measurements (Wronkowski L., 1995), evaluation of microelectronics devices deformation (Xie H. et al., 2004), optical communications (Chen L. et al., 2000), strain measurements with Fiber Bragg Grattings, FBGs, (Silva A. F. et al., 2011) and spectrography (Kong S. H. et al., 2001). In this context, it must be noted that the recent nuclear disaster in Fukushima, Japan, confirms the need of tighter security measures be done within harsh environments (which includes the automobiles) in order to increase both the safety of people and the reliability of vehicles’ parts

A note on the computation of geometrically defined relative velocities

We discuss some aspects about the computation of kinematic, spectroscopic, Fermi and astrometric relative velocities that are geometrically defined in general relativity. Mainly, we state that kinematic and spectroscopic relative velocities only depend on the 4-velocities of the observer and the test particle, unlike Fermi and astrometric relative velocities, that also depend on the acceleration of the observer and the corresponding relative position of the test particle, but only at the event of observation and not around it, as it would be deduced, in principle, from the definition of these velocities. Finally, we propose an open problem in general relativity that consists on finding intrinsic expressions for Fermi and astrometric relative velocities avoiding terms that involve the evolution of the relative position of the test particle. For this purpose, the proofs given in this paper can serve as inspiration.Comment: 8 pages, 2 figure

RF CMOS transceiver at 2.4 GHz in wearables for measuring the cardio-respiratory function

This paper presents a radio-frequency (RF) transceiver for operation in the 2.4 GHz ISM band. The RF CMOS transceiver can be supplied with only 1.8 V, and it was designed to establish wireless links for distances up to 10 m, for a maximum baud-rate of 250 Kbps with a Bit Error Probability less than 10 6. The transmitter can deliver a output power of 0 dBm with a consumption of only 11.2 mW, while the receiver has sensitivity of 60 dBm and consumes only 6.3 mW. The goal of RF CMOS transceiver is for co-integration with sensors in the same die using microsystems techniques. The target application of such microsystems is in wearables (e.g., in wireless electronic shirts) for measuring biomedical data of patients. The wireless electronic shirt (WES) measures the heart rate and the respiratory frequency, and at the same time it allows patients to maintain their mobilit

Fabrication methodology of microlenses for stereoscopic imagers using standard CMOS process

This paper presents the fabrication technology of microlenses maintaining a high reproducibility of their characteristics with low cost. The objective of microlenses is to be integrated into imagers in CMOS technology to allow stereoscopic vision. The fabricated microlenses form cylindrical arrays to be placed above the optical filters and photodetectors, in order to potentiate stereoscopic vision and at the same time maximizing the color fidelity. An array of optical filters centered at the primary colors will enable a multicolor usage. The AZ4562 material was the photoresist selected for fabricating the microlenses. The cylindrical shape is obtained by reflowing the photoresist using the hot-plate technique.This work and Rui Pedro Rocha were fully supported by the Portuguese Foundation for Science and Technology under the project FCT/PTDC/EEA-ELC/109936/2009 and the financial grant SFRH/BD/33733/2009, respectively

Preditores socio-demográficos, clínicos e de saúde oral auto-percebida nos idosos

Poster apresentado nas XXIV Jornadas Internacionais de Medicina Dentária do ISCSEM, 4-5 Março 2015, Egas Moniz, Caparica, Portugal

On the differential geometry of curves in Minkowski space

We discuss some aspects of the differential geometry of curves in Minkowski space. We establish the Serret-Frenet equations in Minkowski space and use them to give a very simple proof of the fundamental theorem of curves in Minkowski space. We also state and prove two other theorems which represent Minkowskian versions of a very known theorem of the differential geometry of curves in tridimensional Euclidean space. We discuss the general solution for torsionless paths in Minkowki space. We then apply the four-dimensional Serret-Frenet equations to describe the motion of a charged test particle in a constant and uniform electromagnetic field and show how the curvature and the torsions of the four-dimensional path of the particle contain information on the electromagnetic field acting on the particle.Comment: 10 pages. Typeset using REVTE