Tunable high-average-power optical parametric oscillators near 2 μm

We report on the development of high-average-power nanosecond and picosecond laser sources tunable near 2 μm based on optical parametric oscillators (OPOs) pumped by solid-state Nd:YAG and Yb-fiber lasers at 1.064 μm. By exploiting 50-mm-long MgO-doped lithium niobate (MgO:PPLN) as the nonlinear crystal and operating the OPO in a near-degenerate doubly resonant configuration with intracavity wavelength selection elements, we have generated tunable high-average-power radiation across 1880–2451 nm in high spectral and spatial beam quality with excellent output stability. In nanosecond operation, pumping with a Q-switched Nd:YAG laser and using an intracavity prism for spectral control, we have generated more than 2 W of average power in pulses of 10 ns duration at 80 kHz repetition rate with narrow linewidth (<3 nm), with M2 < 2.8, and a passive power stability better than 2.2% rms over 1 h. In picosecond operation, pumping with a mode-locked Ybfiber laser and using a diffraction grating as the wavelength selection element, we have generated more than 5 W of average power in pulses of 20 ps at 80 MHz repetition rate with narrow bandwidth (∼2.5 nm), with M2 < 1.8 and a passive power stability better than 1.3% rms over 2 h. The demonstrated sources represent viable alternatives to Tm3 ∕Ho3 -doped solid-state and fiber lasers for the generation of high-power radiation in the ∼2 μm spectral range.Peer ReviewedPostprint (author's final draft

Impacts of Use and Abuse of Nature in Catalonia with Proposals for Sustainable Management

This paper provides an overview of the last 40 years of use, and in many cases abuse, of the natural resources in Catalonia, a country that is representative of European countries in general, and especially those in the Mediterranean region. It analyses the use of natural resources made by mining, agriculture, livestock, logging, fishing, nature tourism, and energy production and consumption. This use results in an ecological footprint, i.e., the productive land and sea surface required to generate the consumed resources and absorb the resulting waste, which is about seven times the amount available, a very high number but very similar to other European countries. This overexploitation of natural resources has a huge impact on land and its different forms of cover, air, and water. For the last 25 years, forests and urban areas have each gained almost 3% more of the territory at the expense of agricultural land; those municipalities bordering the sea have increased their number of inhabitants and activity, and although they only occupy 6.7% of the total surface area, they account for 43.3% of the population; air quality has stabilized since the turn of the century, and there has been some improvement in the state of aquatic ecosystems, but still only 36% are in good condition, while the remainder have suffered morphological changes and different forms of nonpoint source pollution; meanwhile the biodiversity of flora and fauna remains still under threat. Environmental policies do not go far enough so there is a need for revision of the legislation related to environmental impact and the protection of natural areas, flora, and fauna. The promotion of environmental research must be accompanied by environmental education to foster a society which is more knowledgeable, has more control and influence over the decisions that deeply affect it. Indeed, nature conservation goes hand in hand with other social and economic challenges that require a more sustainable vision. Today's problems with nature derive from the current economic model, which is environmentally unsustainable in that it does not take into account environmental impacts. Lastly, we propose a series of reasonable and feasible priority measures and actions related to each use made of the country's natural resources, to the impacts they have had, and to their management, in the hope that these can contribute to improving the conservation and management of the environment and biodiversity and move towards sustainability

The Barcelona SGA-SEG student chapter: New fronts for international cooperation in teaching Geology and student exchanges

The Barcelona SGA-SEG Student Chapter is a student organization created and organized by students from the Faculty of Earth Science (University of Barcelona; UB). It offers to students interested in Mineralogy, Mineral Deposits and Economic Geology the opportunity to participate in research projects, student exchanges, seminars and courses in an international level. The students develop capacity of self-organization, team-work and public social skills. Recent activities are international exchange of student groups and participation in the project to update and replicate the mineral collection of the UB

The pilot project of the mineral collections from the University of Barcelona: An opportunity to create updated teaching material to be shared with other universities

The Mineralogy teaching collection from the University of Barcelona has proved to be a successful tool for students. The urge of its renewal to meet the necessities of modernCindustry brought the idea to replicate this collection in order to offer high quality teaching material to other universities worldwide. This project has led to an international collaboration aiming to enhance international solidarity among universities and make evident the importance of Mineralogy in Geology studies

Impacts of Use and Abuse of Nature in Catalonia with Proposals for Sustainable Management

This paper provides an overview of the last 40 years of use, and in many cases abuse, of the natural resources in Catalonia, a country that is representative of European countries in general, and especially those in the Mediterranean region. It analyses the use of natural resources made by mining, agriculture, livestock, logging, fishing, nature tourism, and energy production and consumption. This use results in an ecological footprint, i.e., the productive land and sea surface required to generate the consumed resources and absorb the resulting waste, which is about seven times the amount available, a very high number but very similar to other European countries. This overexploitation of natural resources has a huge impact on land and its different forms of cover, air, and water. For the last 25 years, forests and urban areas have each gained almost 3% more of the territory at the expense of agricultural land; those municipalities bordering the sea have increased their number of inhabitants and activity, and although they only occupy 6.7% of the total surface area, they account for 43.3% of the population; air quality has stabilized since the turn of the century, and there has been some improvement in the state of aquatic ecosystems, but still only 36% are in good condition, while the remainder have suffered morphological changes and different forms of nonpoint source pollution; meanwhile the biodiversity of flora and fauna remains still under threat. Environmental policies do not go far enough so there is a need for revision of the legislation related to environmental impact and the protection of natural areas, flora, and fauna. The promotion of environmental research must be accompanied by environmental education to foster a society which is Land 2021, 10, 144 3 of 53 more knowledgeable, has more control and influence over the decisions that deeply affect it. Indeed, nature conservation goes hand in hand with other social and economic challenges that require a more sustainable vision. Today’s problems with nature derive from the current economic model, which is environmentally unsustainable in that it does not take into account environmental impacts. Lastly, we propose a series of reasonable and feasible priority measures and actions related to each use made of the country’s natural resources, to the impacts they have had, and to their management, in the hope that these can contribute to improving the conservation and management of the environment and biodiversity and move towards sustainability.info:eu-repo/semantics/publishedVersio

Occupational exposure to grain dust

SIGLEGBUnited Kingdo

High-power, high-repetition-rate performance characteristics of β-BaB2O4 for single-pass picosecond ultraviolet generation at 266 nm

We report a systematic study on the performance characteristics of a high-power, high-repetition-rate, picosecond ultraviolet (UV) source at 266 nm based on β-BaB2O4 (BBO). The source, based on single-pass fourth harmonic generation (FHG) of a compact Yb-fiber laser in a two-crystal spatial walk-off compensation scheme, generates up to 2.9 W of average power at 266 nm at a pulse repetition rate of ~80 MHz with a single-pass FHG efficiency of 35% from the green to UV. Detrimental issues such as thermal effects have been studied and confirmed by performing relevant measurements. Angular and temperature acceptance bandwidths in BBO for FHG to 266 nm are experimentally determined, indicating that the effective interaction length is limited by spatial walk-off and thermal gradients under high-power operation. The origin of dynamic color center formation due to two-photon absorption in BBO is investigated by measurements of intensity-dependent transmission at 266 nm. Using a suitable theoretical model, two-photon absorption coefficients as well as the color center densities have been estimated at different temperatures. The measurements show that the two-photon absorption coefficient in BBO at 266 nm is ~3.5 times lower at 200°C compared to that at room temperature. The long-term power stability as well as beam pointing stability is analyzed at different output power levels and focusing conditions. Using cylindrical optics, we have circularized the generated elliptic UV beam to a circularity of >90%. To our knowledge, this is the first time such high average powers and temperature-dependent two-photon absorption measurements at 266 nm are reported at repetition rates as high as ~80 MHz.Peer Reviewe

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.Peer ReviewedPostprint (published version

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.Peer Reviewe

Tunable high-average-power optical parametric oscillators near 2 μm

We report on the development of high-average-power nanosecond and picosecond laser sources tunable near 2 μm based on optical parametric oscillators (OPOs) pumped by solid-state Nd:YAG and Yb-fiber lasers at 1.064 μm. By exploiting 50-mm-long MgO-doped lithium niobate (MgO:PPLN) as the nonlinear crystal and operating the OPO in a near-degenerate doubly resonant configuration with intracavity wavelength selection elements, we have generated tunable high-average-power radiation across 1880–2451 nm in high spectral and spatial beam quality with excellent output stability. In nanosecond operation, pumping with a Q-switched Nd:YAG laser and using an intracavity prism for spectral control, we have generated more than 2 W of average power in pulses of 10 ns duration at 80 kHz repetition rate with narrow linewidth (<3 nm), with M2 < 2.8, and a passive power stability better than 2.2% rms over 1 h. In picosecond operation, pumping with a mode-locked Ybfiber laser and using a diffraction grating as the wavelength selection element, we have generated more than 5 W of average power in pulses of 20 ps at 80 MHz repetition rate with narrow bandwidth (∼2.5 nm), with M2 < 1.8 and a passive power stability better than 1.3% rms over 2 h. The demonstrated sources represent viable alternatives to Tm3 ∕Ho3 -doped solid-state and fiber lasers for the generation of high-power radiation in the ∼2 μm spectral range.Peer Reviewe