Negative ozone anomalies at a high mountain site in northern Italy during 2020: a possible role of COVID-19 lockdowns?

Several studies investigated the possible impacts of the restriction measures related to the containment of the spread of the COrona VIrus Disease (COVID-19) to atmospheric ozone (O3) at global, regional, and local scales during 2020. O3 is a secondary pollutant with adverse effects on population health and ecosystems and with negative impacts on climate, acting as greenhouse gas. Most of these studies focused on spring 2020 (i.e. March–May) and on observations in the planetary boundary layer (PBL), mostly in the vicinity of urban agglomerates. Here, we analyzed the variability of O3 above the PBL of northern Italy in 2020 by using continuous observations carried out at a high mountain WMO/GAW global station in Italy (Mt. Cimone–CMN; 44°12' N, 10°42' E, 2165 m a.s.l.). Low O3 monthly anomalies were observed during spring (MAM) and summer (JJA), when periods of low O3 intertwined with periods with higher O3, within climatological ranges. A similar variability was observed for O3 precursors like NO2 and 15 anthropogenic non-methane volatile organic carbons, but the systematic O3 anomalies were not reflected in these variables. The analysis of meteorological variables and diel O3 cycles did not suggest major changes in the vertical transport related to the thermal circulation system in the mountain area. The analysis of five days back-trajectories suggested that the observed O3 anomalies cannot be explained by differences in the synoptic-scale circulation with respect to the previous years alone. On the other hand, the characterization of two transport patterns (i.e. air masses from the regional PBL or from the free troposphere) and the analysis of back-trajectories suggested an important contribution of transport from the continental PBL during the periods with the lowest O3 at CMN. When proxies of air mass transport from the regional PBL are considered, a lower NOx content was pointed out with respect to the previous years, suggesting a lower O3 production in a NOx-limited atmosphere. Our study suggested for the first time that, during MAM and JJA 2020, the reduced anthropogenic emissions related to the COVID-19 restrictions lowered the amount of this short-lived climate forcer/pollutant at remote locations above the PBL over northern Italy. This work suggests the importance of limiting anthropogenic precursor emissions for decreasing the O3 amount at remote locations and in upper atmospheric layers

Analysis of multi-year near-surface ozone observations at the WMO/GAW "Concordia" station (75°06′S, 123°20′E, 3280 m a.s.l. – Antarctica)

Abstract This work focuses on the near-surface O3 variability over the eastern Antarctic Plateau. In particular, eight years (2006–2013) of continuous observations at the WMO/GAW contributing station "Concordia" (Dome C–DMC: 75°06′S, 123°20′E, 3280 m) are presented, in the framework of the Italian Antarctic Research Programme (PNRA). First, the characterization of seasonal and diurnal O3 variability at DMC is provided. Then, for the period of highest data coverage (2008–2013), we investigated the role of specific atmospheric processes in affecting near-surface summer O3 variability, when O3 enhancement events (OEEs) are systematically observed at DMC (average monthly frequency peaking up to 60% in December). As deduced by a statistical selection methodology, these OEEs are affected by a significant interannual variability, both in their average O3 values and in their frequency. To explain part of this variability, we analyzed OEEs as a function of specific atmospheric variables and processes: (i) total column of O3 (TCO) and UV-A irradiance, (ii) long-range transport of air masses over the Antarctic Plateau (by Lagrangian back-trajectory analysis – LAGRANTO), (iii) occurrence of "deep" stratospheric intrusion events (by using the Lagrangian tool STLEFLUX). The overall near-surface O3 variability at DMC is controlled by a day-to-day pattern, which strongly points towards a dominating influence of processes occurring at "synoptic" scales rather than "local" processes. Even if previous studies suggested an inverse relationship between OEEs and TCO, we found a slight tendency for the annual frequency of OEEs to be higher when TCO values are higher over DMC. The annual occurrence of OEEs at DMC seems related to the total time spent by air masses over the Antarctic plateau before their arrival to DMC, suggesting the accumulation of photochemically-produced O3 during the transport, rather than a more efficient local production. Moreover, the identification of recent (i.e., 4-day old) stratospheric intrusion events by STEFLUX suggested only a minor influence (up to 3% of the period, in November) of "deep" events on the variability of near-surface summer O3 at DMC

Five‐year analysis of background carbon dioxide and ozone variations during summer seasons at the Mario Zucchelli station (Antarctica)

The work focuses on the analysis of CO 2 and O 3 surface variations observed during five summer experimental campaigns carried out at the 'Icaro Camp' clean air facility (74.7°S, 164.1°E, 41 m a.s.l.) of the 'Mario Zucchelli' Italian coastal research station. This experimental activity allowed the definition of summer average background O 3 values that ranged from 18.3 ± 4.7 ppbv (summer 2005–2006) to 21.3 ± 4.0 ppbv (summer 2003–2004). Background CO 2 concentrations showed an average growth rate of 2.10 ppmv yr -1 , with the highest CO 2 increase between the summer campaigns 2002–2003 and 2001–2002 (+2.85 ppmv yr -1 ), probably reflecting the influence of the 2002/2003 ENSO event. A comparison with other Antarctic coastal sites suggested that the summer background CO 2 and O 3 at MZS-IC are well representative of the average conditions of the Ross Sea coastal regions. As shown by the analysis of local wind direction and by 3-D back-trajectory calculations, the highest CO 2 and O 3 values were recorded in correspondence to air masses flowing from the interior of the Antarctic continent. These results suggest that air mass transport from the interior of the continent exerts an important influence on air mass composition in Antarctic coastal areas. DOI: 10.1111/j.1600-0889.2011.00576.

Calibration and assessment of electrochemical low-cost sensors in remote alpine harsh environments

This work presents results from an original open-source low-cost sensor (LCS) system developed to measure tropospheric O3 in a remote high altitude alpine site. Our study was conducted at the Col Margherita Observatory (2543 m above sea level), in the Italian Eastern Alps. The sensor system mounts three commercial low-cost O3/NO2 sensors that have been calibrated before field deployment against a laboratory standard (Thermo Scientific; 49i-PS), calibrated against the standard reference photometer no. 15 calibration scale of the World Meteorological Organization (WMO). Intra- and intercomparison between the sensors and a reference instrument (Thermo Scientific; 49c) have been conducted for 7 months from May to December 2018. The sensors required an individual calibration, both in laboratory and in the field. The sensor's dependence on the environmental meteorological variables has been considered and discussed. We showed that it is possible to reduce the bias of one LCS by using the average coefficient values of another LCS working in tandem, suggesting a way forward for the development of remote field calibration techniques. We showed that it is possible reconstruct the environmental ozone concentration during the loss of reference instrument data in situations caused by power outages. The evaluation of the analytical performances of this sensing system provides a limit of detection (LOD) 0.8, bias >3.5 ppb and ±8.5 at 95 % confidence. This first implementation of a LCS system in an alpine remote location demonstrated how to obtain valuable data from a low-cost instrument in a remote environment, opening new perspectives for the adoption of low-cost sensor networks in atmospheric sciences.publishedVersio

Analysis of Summer Ozone Observations at a High Mountain Site in Central Italy (Campo Imperatore, 2388 m a.s.l.)

Tropospheric ozone (O3) is an important atmospheric pollutant and climate forcer. The Mediterranean basin is a hot-spot region in terms of short-term O3 distribution, with frequent episodes of high tropospheric O3, especially during summer. To improve the characterisation of summer O3 variability in the Mediterranean area, during the period 6–27 August 2009 an experimental campaign was conducted at Campo Imperatore, Mt Portella (CMP), a high mountain site (2,388 m a.s.l.) located in the central Italian Apennines. As deduced from analysis of atmospheric circulation, the measurement site was significantly affected by air masses originating over the Mediterranean basin, which affected the measurement site for 32 % of the time. Analysis of average values and diurnal and day-to-day variability revealed that CMP O3 observations (average value 60.0 ± 5.1 ppbv) were comparable with measurements at other European mountain stations, indicating a prevalent effect of meteorological conditions and atmospheric transport on the synoptic scale. In fact, only a small "reverse" diurnal variation typically characterises diurnal O3 variability because of local thermal wind circulation, which sporadically favours transport of air masses rich in O3 from the foothill regions. Statistical analysis of five-day back-trajectory ensembles indicates that synoptic-scale air-mass transport from the Mediterranean Sea usually results in decreasing O3 concentrations at CMP, whereas the highest hourly O3 values are mostly associated with air masses from central continental Europe, eastern Europe, and northern Italy. High O3 concentrations are also related to downward air-mass transport from higher altitudes. Comparison of in-situ O3 variability with tropospheric O3 satellite-based measurements reveals similar features of the two data sets. Together with the results from back-trajectory analysis, this indicates that CMP measurements might usefully improve characterisation of broad-scale O3 variability over the central Mediterranean basin

Transport of Stratospheric Air Masses to the Nepal Climate Observatory–Pyramid (Himalaya; 5079 m MSL): A Synoptic-Scale Investigation

AbstractThis work analyzes and classifies stratospheric airmass transport events (ST) detected at the Nepal Climate Observatory–Pyramid (NCO-P; 27°57′N, 86°48′E, 5079 m MSL) Global Atmospheric Watch–World Meteorological Organization station from March 2006 to February 2008. For this purpose, in situ ozone (O3), meteorological parameters (atmospheric pressure and relative humidity), and black carbon (BC) are analyzed. The paper describes the synoptic-scale meteorological scenarios that are able to favor the development of ST over the southern Himalaya, by analyzing the meteorological fields provided by the ECMWF model (geopotential height, wind speed, and potential vorticity), satellite Ozone Monitoring Instrument data (total column ozone), and three-dimensional back trajectories calculated with the Lagrangian Analysis Tool (LAGRANTO) model. The study, which represents the first "continuous" classification of ST in the southern Himalaya, permitted classification of 94% of ST days within four synoptic-scale scenarios: stratospheric potential vorticity structures (PVS), subtropical jet stream (SJS), quasi-stationary ridges (QSR), and monsoon depressions (MD). SJS and PVS were the most frequent scenarios (48% and 30% of occurrences, respectively), QSR occurred for 12% of the ST days, and MD were detected only during the monsoon season (3%). SJS and PVS scenarios presented a peak frequency during the nonmonsoon seasons, when the jet stream and westerly disturbances influence atmospheric circulation over the southern Himalaya. During the identified ST, significant variations of O3 (+24%) and BC (−56%) were recorded relative to the averaged 2-yr mean values. On average, PVS and SJS were the most effective synoptic-scale scenarios in modifying the O3 and BC levels at NCO-P from postmonsoon to premonsoon seasons, and ST is one of the leading processes in defining the "background" BC variability at NCO-P

Increasing the maturity of measurements of essential climate variables (ECVs) at Italian atmospheric WMO/GAW observatories by implementing automated data elaboration chains

In the framework of the National Project of Interest NextData, we developed automatic procedures for the flagging and formatting of trace gases, atmospheric aerosols and meteorological data to be submitted to the World Data Centers (WDCs) of the Global Atmosphere Watch program of the World Meteorological Organization (WMO/GAW). In particular, the atmospheric Essential Climate Variables (ECVs) covered in this work are observations of near-surface trace gas concentrations, aerosol properties and meteorological variables, which are under the umbrella of the World Data Center for Greenhouse Gases (WDCGG), the World Data Center for Reactive Gases, and the World Data Center for Aerosol (WDCRG and WDCA). We developed an overarching processing chain to create a number of data products (data files and reports) starting from the raw data, finally contributing to increase the maturity of these measurements. To this aim, we implemented specific routines for data filtering, flagging, format harmonization, and creation of data products, useful for detecting instrumental problems, particular atmospheric events and quick data dissemination towards stakeholders or citizens. Currently, the automatic data processing is active for a subset of ECVs at 5 measurement sites in Italy. The system represents a valuable tool to facilitate data originators towards a more efficient data production. Our effort is expected to accelerate the process of data submission to WMO/GAW or to other reference data centers or repositories. Moreover, the adoption of automatic procedures for data flagging and data correction allows to keep track of the process that led to the final validated data, and makes data evaluation and revisions more efficient by improving the traceability of the data production process