Bi-Metallic Magnetic Wire With Insulating Layer as Core for Orthogonal Fluxgate

In this paper, we examine the problems related to orthogonal fluxgates realized using magnetic microwires as core. Starting from a description of orthogonal fluxgates evolution, we give a theoretical analysis of the problems involving the full saturation of the wire, necessary condition to obtain proper working conditions. Bi-metallic wires (magnetic layer on copper wire, carrying the excitation current) have been proposed to achieve full saturation using lower current. In this paper, we present a further improvement: we realized microwires with insulation layer between the copper wire and the magnetic layer. The current flows only into the copper, regardless of the working frequency. Using insulation layer, we achieve 20 mA saturation current at 10 kHz, which is 3 times smaller than for similar wires without insulation layer

Magnetic anisotropy in ordered textured Co nanowires

The following article appeared in Applied Physics Letters 100.25 (2012): 252405 and may be found at http://scitation.aip.org/content/aip/journal/apl/100/25/10.1063/1.4729782The magnetization reversal in ordered arrays of Co nanowires with tailored hcp-phase texture, controlled by pH synthesis and nanowires length, has been investigated. The angular dependence of coercivity has been experimentally determined for different crystal textures, and the corresponding magnetization reversal mode is interpreted by analytical modelling. The results show that reversal takes place by propagation of a transverse-like domain wall mode. The fitting of experimental and calculated data allows us the quantitative evaluation of the magnetocrystalline anisotropy constant strength whose magnetization easy direction evolves from parallel to the wires toward in-plane orientation with the change of hcp-phase textureThe project has been performed under bilateral Chile-Spain project 2010CL0018. Additional financial support is acknowledged from the Spanish Ministry of Science and Innovation, MICINN, and MAT2010-20798-C05-01. Financial support from FONDECYT No. 1110784, Grant ICM P10-061-F by Fondo de Innovación para la Competitividad-MINECON and Financiamiento Basal para Centros Científicos y Tecnológicos de Excelencia, under project FB0807

Magnetic Microwires With Field-Induced Helical Anisotropy for Coil-Less Fluxgate

We present a new method for production of magnetic microwire with helical anisotropy. Coil-less fluxgate sensors are generally composed of a bimetallic wire excited by an alternating current; in order for the wire to work in coil-less fluxgate mode, the magnetic layer of the wire needs to have helical anisotropy. So far, we have achieved such anisotropy by mechanically twisting the wire. However, this method has some disadvantages for practical applications, mainly regarding the sensor stability. We propose a method that provides helical anisotropy by applying a helical field during the electrodeposition: this is achieved by the superposition of a longitudinal field generated by a Helmholtz coil and a circumferential field produced by a direct current flowing through the core of the wire during electrodeposition

Induced sputum cellularity. Reference values and distribution in normal volunteers.

Abstract Sputum induction has recently been proposed as the only direct noninvasive method for measuring airway inflammatory indices. The reference values and the distribution of cells in induced sputum in a control population have not yet been well defined. We therefore evaluated data from a large number of healthy volunteers. One hundred fourteen healthy, nonatopic, nonsmoking volunteers without airway hyperreactivity were enrolled (age: 38 +/- 13 yr [mean +/- SD]; FEV(1): 105 +/- 10% predicted; provocative dose of methacholine inducing a 20% decrease FEV(1) > 3,200 microgram). Ninety-six subjects (84%) produced adequate analysis samples. The subjects had a normal age distribution. Their induced sputum was rich in macrophages (69.2 +/- 13%) and neutrophils (27.3 +/- 13%), and poor in eosinophils (0.6 +/- 0.8%), lymphocytes (1.0 +/- 1.2%), and epithelial cells (1.5 +/- 1.8%). Only macrophages and neutrophils showed a normal distribution; total and differential counts of other cells did not. We propose that these data be used in comparison of the induced sputum cells of normal subjects and those of patients with airway inflammation

Towards community browsing for shared experiences: The webrowse system

We introduce the new concept of community browsing: A group of people browsing the web together and simultaneously. Community browsing is part of the broader notion of shared experience, where individuals share the experience of an event. We have developed a prototype of a mobile application that enables community browsing, and involves new technologies such as a peer-topeer Electronic Institution and bipolar preference aggregation

Inhaled corticosteroids reduce neutrophilic bronchial inflammation in patients with chronic obstructive pulmonary disease.

Abstract BACKGROUND: Airways inflammation is a feature of chronic obstructive pulmonary disease (COPD), but the role of corticosteroids in the management of clinically stable patients has yet to be established. A randomised controlled study was carried out to investigate the effect of high dose inhaled beclomethasone dipropionate (BDP) administered for two months to patients with stable, smoking related COPD. Sputum induction was used to evaluate bronchial inflammation response. METHODS: 34 patients (20 men and 14 women) were examined on three separate occasions. At the initial clinical assessment (visit 0), spirometry and blood gas analysis were performed. On visit 1 (within one week of visit 0) sputum induction was performed and each patient was randomised to receive either BDP 500 micrograms three times daily (treated group) or nothing (control group). After two months (visit 2), all patients underwent repeat clinical assessment, spirometry, and sputum induction. RESULTS: There were no differences in sputum cell counts between the groups at baseline. After two months of treatment, induced sputum samples from patients in the treated group showed a reduction in both neutrophils (-27%) and total cells (-42%) with respect to baseline, while the control group did not (neutrophils +9%, total cells +7%). Macrophages increased in the treated group but not in the control group. The mean final value of sputum neutrophils was 52% in the treated group and 73.3% in the control group (95% confidence interval (CI) -27.2 to -15.4). The mean final value of sputum macrophages was 35.8% in treated group and 19.3% in control group (95% CI 10.3 to 22.8). The differences between the treated and control groups for neutrophils (-21.3%), macrophages (+16.5%), and total cells (-65%) were significant. Spirometry and blood gas data did not change from baseline in either patient group. CONCLUSIONS: A two month course of treatment with high dose inhaled BDP reduces significantly neutrophil cell counts in patients with clinically stable, smoking related COPD. Further studies on the effectiveness of inhaled steroids in COPD are needed to confirm the clinical importance of this observation

Efficacy of free glutathione and niosomal glutathione in the treatment of acetaminophen-induced hepatotoxicity in cats

Acetaminophen (APAP) administration results in hepatotoxicity and hematotoxicity in cats. The response to three different treatments against APAP poisoning was evaluated. Free glutathione (GSH) (200mg/kg), niosomal GSH (14 mg/kg) and free amino acids (180 mg/kg of N-acetylcysteine and 280 mg/kg of methionine) were administered to cats that were intoxicated with APAP (a single dose of 150 mg/kg, p.o.). Serum concentration of alanine aminotransferase (ALT) along with serum, liver and erythrocyte concentration of GSH and methemoglobin percentage were measured before and 4, 24 and 72 hours after APAP administration. Free GSH (200 mg/kg) and niosomal GSH (14 mg/kg) were effective in reducing hepatotoxicity and hematotoxicity in cats intoxicated with a dose of 150 mg/kg APAP. We conclude that both types of treatments can protect the liver and haemoglobin against oxidative stress in APAP intoxicated cats. Furthermore, our results showed that treatment with niosomal GSH represents an effective therapeutic approach for APAP poisoning.Fil: Denzoin Vulcano, L. A.. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Veterinarias. Departamento de Fisiopatologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Tandil. Centro de Investigacion Veterinaria de Tandil; ArgentinaFil: Confalonieri, O.. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Veterinarias. Departamento de Clinicas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Tandil. Centro de Investigacion Veterinaria de Tandil; ArgentinaFil: Franci, R.. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Veterinarias. Departamento de Clinicas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Tandil. Centro de Investigacion Veterinaria de Tandil; ArgentinaFil: Tapia, Maria Ofelia. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Veterinarias. Departamento de Fisiopatologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Tandil. Centro de Investigacion Veterinaria de Tandil; ArgentinaFil: Soraci, Alejandro Luis. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Veterinarias. Departamento de Fisiopatologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Tandil. Centro de Investigacion Veterinaria de Tandil; Argentin

Protocols for the field testing

The COMMON SENSE project has been designed and planned in order to meet the general and specific scientific and technical objectives mentioned in its Description of Work (page 77). In an overall strategy of the work plan, work packages (11) can be grouped into 3 key phases: (1) RD basis for cost-effective sensor development, (2) Sensor development, sensor web platform and integration, and (3) Field testing. In the first two phases WP1 and WP2 partners have provided a general understanding and integrated basis for a cost effective sensors development. Within the following WPs 4 to 8 the new sensors are created and integrated into different identified platforms. During the third phase 3, characterized by WP9, partners will deploy precompetitive prototypes at chosen platforms (e.g. research vessels, oil platforms, buoys and submerged moorings, ocean racing yachts, drifting buoys). Starting from August 2015 (month 22; task 9.2), these platforms will allow the partnership to test the adaptability and performance of the in-situ sensors and verify if the transmission of data is properly made, correcting deviations. In task 9.1 all stakeholders identified in WP2, and other relevant agents, have been contacted in order to close a coordinated agenda for the field testing phase for each of the platforms. Field testing procedures (WP2) and deployment specificities, defined during sensor development in WPs 4 to 8, are closely studied by all stakeholders involved in field testing activities in order for everyone to know their role, how to proceed and to provide themselves with the necessary material and equipment (e.g. transport of instruments). All this information will provide the basis for designing and coordinating field testing activities. Type and characteristics of the system (vessel or mooring, surface or deep, open sea or coastal area, duration, etc.), used for the field testing activities, are planned comprising the indicators included in the above-mentioned descriptors, taking into account that they must of interest for eutrophication, concentration of contaminants, marine litter and underwater noise. In order to obtain the necessary information, two tables were realized starting from the information acquired for D2.2 delivered in June 2014. One table was created for sensor developers and one for those partners that will test the sensors at sea. The six developers in COMMON SENSE have provided information on the seven sensors: CEFAS and IOPAN for underwater noise; IDRONAUT and LEITAT for microplastics; CSIC for an innovative piro and piezo resistive polymeric temperature and pressure and for heavy metal; DCU for the eutrophication sensor. This information is anyway incomplete because in most cases the novel sensors are still far to be ready and will be developed over the course of COMMON SENSE. So the sensors cannot be clearly designed yet and, consequently, technical characteristics cannot still be perfectly defined. This produces some lag in the acquired information and, consequently, in the planning of their testing on specific platforms that will be solved in the near future. In the table for Testers, partners have provided information on fifteen available platforms. Specific answers have been given on number and type of sensors on each platforms, their availability and technical characteristics, compatibility issues and, very important when new sensors are tested, comparative measurements to be implemented to verify them. Finally IOPAN has described two more platforms, a motorboat not listed in the DoW, but already introduced in D2.2, and their oceanographic buoy in the Gdansk Bay that was previously unavailable. The same availability now is present for the OBSEA Underwater observatory from CSIC, while their Aqualog undulating mooring is still not ready for use. In the following months, new information on sensors and platforms will be provided and the planning of testing activities will improve. Further updates of this report will be therefore necessary in order to individuate the most suitable platforms to test each kind of sensor. Objectives and rationale The objective of deliverable 9.1 is the definition of field testing procedures (WP2), the study of deployment specificities during sensor development work packages (from WP4 to WP8) and the preparation of protocols. This with the participation of all stakeholders involved in field testing activities in order for everyone to know their role, how to proceed and to provide themselves with the necessary material and equipment

Field testing, validation and optimization report

The COMMON SENSE project has been designed and planned in order to meet the general and specific scientific and technical objectives mentioned in its Description of Work (page 77). As the overall strategy, the 11 work packages (WPs) of the work plan were grouped into 3 key phases: (1) RD basis for cost-effective sensor development , (2) Sensor development, sensor web platform and integration, and (3) Field testing. In the first two phases, partners involved in WP1 and WP2 have provided a general understanding and integrated basis for a cost effective sensors development. Within the following WPs 4 to 8 the new sensors were created and integrated into different identified platforms. During the third phase of field testing (WP9), partners have deployed precompetitive prototypes at chosen platforms (e.g. research vessels, oil platforms, buoys and submerged moorings, ocean racing yachts, drifting buoys). Starting from August 2015 (month 22; task 9.2), these platforms have allowed the partnership to test the adaptability and performance of the in-situ sensors and verify if the transmission of data is properly made, correcting deviations. In task 9.1 all stakeholders identified in WP2 have been contacted in order to agree upon a coordinated agenda for the field testing phase for each of the platforms. Field testing procedures (WP2) and deployment specificities, defined during sensor development in WPs 4 to 8, have been closely studied by all stakeholders involved in field testing activities in order for everyone to know their role, how to proceed and to provide themselves with the necessary material and equipment (e.g. transport of instruments). All this information have provided the basis for designing and coordinating field testing activities. Subsequently, the available new sensors have been tested since August 2015 till mid-October of the current year (2016) as part of task 9.2, following the indications defined in D9.1, such as the intercomparison of the new sensors with commercial ones, when possible. The availability of new sensors was quite different in time starting with the first tests in September and October 2015 on noise, nutrient and heavy metals sensors and closing with pCO2 in late September 2016. Sensors are technically fully described in the deliverables of WPs 3 to 8 and are here just mentioned where necessary. For further details, please consider those reports. Objectives and rationale The protocols prepared in D9.1 have been verified during the field testing activities of the innovative sensors on platforms. These can be summarized into 3 categories: (1) Research vessels (regular cruises); (2) Fixed platforms; (3) Ocean racing yachts. An exhaustive analysis of the different data obtained during field testing activities has been carried on in order to set possible optimization actions for prototypes design and performances. The data from each platform have been analyzed to verify limits and optimal installations or possible improvements. Finally a set of possible optimization actions has been defined. Data and observations collected during the course of field testing have been used to iteratively optimize the design and performance of the precompetitive prototypes

Analysis of relevant technical issues and deficiencies of the existing sensors and related initiatives currently set and working in marine environment. New generation technologies for cost-effective sensors

The last decade has seen significant growth in the field of sensor networks, which are currently collecting large amounts of environmental data. This data needs to be collected, processed, stored and made available for analysis and interpretation in a manner which is meaningful and accessible to end users and stakeholders with a range of requirements, including government agencies, environmental agencies, the research community, industry users and the public. The COMMONSENSE project aims to develop and provide cost-effective, multi-functional innovative sensors to perform reliable in-situ measurements in the marine environment. The sensors will be easily usable across several platforms, and will focus on key parameters including eutrophication, heavy metal contaminants, marine litter (microplastics) and underwater noise descriptors of the MSFD. The aims of Tasks 2.1 and 2.2 which comprise the work of this deliverable are: • To obtain a comprehensive understanding and an up-to-date state of the art of existing sensors. • To provide a working basis on “new generation” technologies in order to develop cost-effective sensors suitable for large-scale production. This deliverable will consist of an analysis of state-of-the-art solutions for the different sensors and data platforms related with COMMONSENSE project. An analysis of relevant technical issues and deficiencies of existing sensors and related initiatives currently set and working in marine environment will be performed. Existing solutions will be studied to determine the main limitations to be considered during novel sensor developments in further WP’s. Objectives & Rationale The objectives of deliverable 2.1 are: • To create a solid and robust basis for finding cheaper and innovative ways of gathering data. This is preparatory for the activities in other WPs: for WP4 (Transversal Sensor development and Sensor Integration), for WP(5-8) (Novel Sensors) to develop cost-effective sensors suitable for large-scale production, reducing costs of data collection (compared to commercially available sensors), increasing data access availability for WP9 (Field testing) when the deployment of new sensors will be drawn and then realized