Characterisation of wastewater for modelling of wastewater treatment plants receiving industrial effluent

Bio-process modelling is increasingly used in design, modification and troubleshooting of wastewater treatment plants (WWTPs). Characterisation of the influent wastewater to a WWTP is an important part of developing such a model. The characterisation required for modelling is more detailed than that routinely employed for monitoring WWTP operation. Wastewater characteristics depend on the sources within the catchment served by a particular WWTP, and the presence of industrial effluents can cause the wastewater to be significantly different from purely domestic effluent. eThekwini’s wastewater treatment system is one of those most affected by industrial effluents in South Africa. Where industrial pollutants cause particular problems, additional measurements, beyond those standardly applied in sewage treatment, are required. Since influent characteristics vary from one catchment to another, this paper presents and compares results of influent wastewater characterisation from three municipal WWTPs, two of which are operated by eThekwini Water Services, which receive a combination of industrial and domestic wastewater. The paper also presents efforts to fractionate the influent COD of another WWTP run by eThekwini municipality and receiving a complex mixture of industrial and domestic effluent. The influent characterisation involves the determination of the volumes and concentrations of the carbonaceous, nitrogenous and phosphorus fractions in the wastewater, as well as other constituents present in the wastewater. This paper focuses on the carbonaceous fraction in the wastewater.Keywords: influent characterisation, industrial effluent, process modellin

Efficiency of Lift Production in Flapping and Gliding Flight of Swifts

Many flying animals use both flapping and gliding flight as part of their routine behaviour. These two kinematic patterns impose conflicting requirements on wing design for aerodynamic efficiency and, in the absence of extreme morphing, wings cannot be optimised for both flight modes. In gliding flight, the wing experiences uniform incident flow and the optimal shape is a high aspect ratio wing with an elliptical planform. In flapping flight, on the other hand, the wing tip travels faster than the root, creating a spanwise velocity gradient. To compensate, the optimal wing shape should taper towards the tip (reducing the local chord) and/or twist from root to tip (reducing local angle of attack). We hypothesised that, if a bird is limited in its ability to morph its wings and adapt its wing shape to suit both flight modes, then a preference towards flapping flight optimization will be expected since this is the most energetically demanding flight mode. We tested this by studying a well-known flap-gliding species, the common swift, by measuring the wakes generated by two birds, one in gliding and one in flapping flight in a wind tunnel. We calculated span efficiency, the efficiency of lift production, and found that the flapping swift had consistently higher span efficiency than the gliding swift. This supports our hypothesis and suggests that even though swifts have been shown previously to increase their lift-to-drag ratio substantially when gliding, the wing morphology is tuned to be more aerodynamically efficient in generating lift during flapping. Since body drag can be assumed to be similar for both flapping and gliding, it follows that the higher total drag in flapping flight compared with gliding flight is primarily a consequence of an increase in wing profile drag due to the flapping motion, exceeding the reduction in induced drag

Deuteronomy and Numbers

Four light isotopes - D, ^3He, ^4He and ^7Li - were produced by nuclear reactions a few seconds after the big bang. New measurements of ^3He in the ISM by Gloeckler and Geiss and of deuterium in high redshift hydrogen clouds by Tytler and his collaborators provide further confirmation of big-bang nucleosynthesis and new insight about the density of ordinary matter (baryons).Comment: 6 pages LaTeX with 1 eps Figur

Truncated Schwinger-Dyson Equations and Gauge Covariance in QED3

We study the Landau-Khalatnikov-Fradkin transformations (LKFT) in momentum space for the dynamically generated mass function in QED3. Starting from the Landau gauge results in the rainbow approximation, we construct solutions in other covariant gauges. We confirm that the chiral condensate is gauge invariant as the structure of the LKFT predicts. We also check that the gauge dependence of the constituent fermion mass is considerably reduced as compared to the one obtained directly by solving SDE.Comment: 17 pages, 11 figures. v3. Improved and Expanded. To appear in Few Body System

The Suprafroth (Superconducting Froth)

The structure and dynamics of froths have been subjects of intense interest due to the desire to understand the behaviour of complex systems where topological intricacy prohibits exact evaluation of the ground state. The dynamics of a traditional froth involves drainage and drying in the cell boundaries, thus it is irreversible. We report a new member to the froths family: suprafroth, in which the cell boundaries are superconducting and the cell interior is normal phase. Despite very different microscopic origin, topological analysis of the structure of the suprafroth shows that statistical von Neumann and Lewis laws apply. Furthermore, for the first time in the analysis of froths there is a global measurable property, the magnetic moment, which can be directly related to the suprafroth structure. We propose that this suprafroth is a new, model system for the analysis of the complex physics of two-dimensional froths

Law Libraries and Laboratories: The Legacies of Langdell and His Metaphor

Law Librarians and others have often referred to Harvard Law School Dean C.C. Langdell’s statements that the law library is the lawyer’s laboratory. Professor Danner examines the context of what Langdell through his other writings, the educational environment at Harvard in the late nineteenth century, and the changing perceptions of university libraries generally. He then considers how the “laboratory metaphor” has been applied by librarians and legal scholars during the twentieth century and into the twenty-first. The article closes with thoughts on Langdell’s legacy for law librarians and the usefulness of the laboratory metaphor

The effect of high dose antibiotic impregnated cement on rate of surgical site infection after hip hemiarthroplasty for fractured neck of femur : a protocol for a double-blind quasi randomised controlled trial

Background: Mortality following hip hemiarthroplasty is in the range of 10-40% in the first year, with much attributed to post-operative complications. One such complication is surgical site infection (SSI), which at the start of this trial affected 4.68% of patients in the UK having this operation. Compared to SSI rates of elective hip surgery, at less than 1%, this figure is elevated. The aim of this quasi randomised controlled trial (RCT) is to determine if high dose antibiotic impregnated cement can reduce the SSI in patients at 12-months after hemiarthroplasty for intracapsular fractured neck of femur. Methods: 848 patients with an intracapsular fractured neck of femur requiring a hip hemiarthroplasty are been recruited into this two-centre double-blind quasi RCT. Participants were recruited before surgery and quasi randomised to standard care or intervention group. Participants, statistician and outcome assessors were blind to treatment allocation throughout the study. The intervention consisted of high dose antibiotic impregnated cement consisting of 1 gram Clindamycin and 1 gram of Gentamicin. The primary outcome is Health Protection Agency (HPA) defined deep surgical site infection at 12 months. Secondary outcomes include HPA defined superficial surgical site infection at 30 days, 30 and 90-day mortality, length of hospital stay, critical care stay, and complications. Discussion: Large randomised controlled trials assessing the effectiveness of a surgical intervention are uncommon, particularly in the speciality of orthopaedics. The results from this trial will inform evidence-based recommendations for antibiotic impregnated cement in the management of patients with a fractured neck of femur undergoing a hip hemiarthroplasty. If high dose antibiotic impregnated cement is found to be an effective intervention, implementation into clinical practice could improve long-term outcomes for patients undergoing hip hemiarthroplasty

Decomposition analysis of LTREs may facilitate the design of short-term ecotoxicological tests

This study compared two methods, based on re-analyzed data from a partly published life table response experiment (LTRE), to help determine the optimal approach for designing ecotoxicological assessments. The 36-day LTRE data recorded the toxic effects of cadmium (Cd) and imidacloprid, alone and in combination, on the reproduction and survivorship of aphids (Acyrthosiphon pisum Harris). We used this data to construct an age-classified matrix model (six age classes, each 6 days long) to estimate aphid population growth rate (λ) under each treatment. For each treatment, an elasticity analysis and a demographic decomposition analysis were performed, and results were compared. Despite different results expected from the two toxicants, the elasticity values were very similar. The elasticity of λ with respect to survival was highest in the first age class, and that with respect to fertility was highest in the second age class. The demographic decomposition analysis examined how changes in life-history traits contributed to differences in λ between control and treated populations (Δλ). This indicated that the most important contributors to Δλ were the differences in survival (resulting from both demographic sensitivity and toxicity) in the first and the second age classes of aphids and differences in fertility in the third and the fourth age classes. Additionally, the toxicants acted differently. Cd reduced Δλ by impairing fertility at third age class and reducing survivorship from the second to the third age class. Imidacloprid mostly reduced survivorship at the first and second age classes. The elasticity and decomposition analyses showed different results, because these methods addressed different questions about the interaction of organism life history and sensitivity to toxicants. This study indicated that the LTRE may be useful for designing individual-level ecotoxicological experiments that account for both the effects of the toxicant and the demographic sensitivity of the organism

Nanofiber fabrication in a temperature and humidity controlled environment for improved fibre consistency

To fabricate nanofibers with reproducible characteristics, an important demand for many applications, the effect of controlled atmospheric conditions on resulting electrospun cellulose acetate (CA) nanofibers was evaluated for temperature ranging 17.5 - 35°C and relative humidity ranging 20% - 70%. With the potential application of nanofibers in many industries, especially membrane and filter fabrication, their reproducible production must be established to ensure commercially viability.
Cellulose acetate (CA) solution (0.2 g/ml) in a solvent mixture of acetone/DMF/ethanol (2:2:1) was electrospun into nonwoven fibre mesh with the fibre diameter ranging from 150nm to 1µm.
The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), showing a correlation of reducing average fibre diameter with increasing atmospheric temperature. A less pronounced correlation was seen with changes in relative humidity regarding fibre diameter, though it was shown that increased humidity reduced the effect of fibre beading yielding a more consistent, and therefore better quality of fibre fabrication.
Differential scanning calorimetry (DSC) studies observed lower melt enthalpies for finer CA nanofibers in the first heating cycle confirming the results gained from SEM analysis. From the conditions that were explored in this study the temperature and humidity that gave the most suitable fibre mats for a membrane purpose were 25.0°C and 50%RH due to the highest level of fibre diameter uniformity, the lowest level of beading while maintaining a low fibre diameter for increased surface area and increased pore size homogeneity. This study has highlighted the requirement to control the atmospheric conditions during the electrospinning process in order to fabricate reproducible fibre mats

Prognostic significance of endogenous adhesion/growth-regulatory lectins in lung cancer

Objective: To determine the expression of endogenous adhesion/growth-regulatory lectins and their binding sites using labeled tissue lectins as well as the binding profile of hyaluronic acid as an approach to define new prognostic markers. Methods: Sections of paraffin-embedded histological material of 481 lungs from lung tumor patients following radical lung excision processed by a routine immunohistochemical method (avidin-biotin labeling, DAB chromogen). Specific antibodies against galectins-1 and - 3 and the heparin-binding lectin were tested. Staining by labeled galectins and hyaluronic acid was similarly visualized by a routine protocol. After semiquantitative assessment of staining, the results were compared with the pT and pN stages and the histological type. Survival was calculated by univariate and multivariate methods. Results: Binding of galectin-1 and its expression tended to increase, whereas the parameters for galectin-3 decreased in advanced pT and pN stages at a statistically significant level. The number of positive cases was considerably smaller among the cases with small cell lung cancer than in the group with non-small-cell lung cancer, among which adenocarcinomas figured prominently with the exception of galectin-1 expression. Kaplan-Meier computations revealed that the survival rate of patients with galectin-3-binding or galectin-1-expressing tumors was significantly poorer than that of the negative cases. In the multivariate calculations of survival lymph node metastases ( p < 0.0001), histological type ( p = 0.003), galectin-3-binding capacity ( p = 0.01), galectin-3 expression ( p = 0.03) and pT status ( p = 0.003) proved to be independent prognostic factors, not correlated with the pN stage. Conclusion: The expression and the capacity to bind the adhesion/growth regulatory galectin-3 is defined as an unfavorable prognostic factor not correlated with the pTN stage. Copyright (C) 2005 S. Karger AG, Basel