Second harmonic generation on self-assembled GaAs/Au nanowires with thickness gradient

Here we investigated the SH generation at the wavelength of 400 nm (pump laser at 800 nm, 120 fs pulses) of a "metasurface" composed by an alternation of GaAs nano-grooves and Au nanowires capping portions of flat GaAs. The nano-grooves depth and the Au nanowires thickness gradually vary across the sample. The samples are obtained by ion bombardment at glancing angle on a 150 nm Au mask evaporated on a GaAs plane wafer. The irradiation process erodes anisotropically the surface, creating Au nanowires and, at high ion dose, grooves in the underlying GaAs substrate (pattern transfer). The SHG measurements are performed for different pump linear polarization angle at different positions on the "metasurface" in order to explore the regions with optimal conditions for SHG efficiency. The pump polarization angle is scanned by rotating a half-wave retarder plate. While the output SH signal in reflection is analyzed by setting the polarizer in s or p configuration in front of the detector. The best polarization condition for SHG is obtained in the configuration where the pump and second harmonic fields are both p polarized, and the experiments show a SH polarization dependence of the same symmetry of bulk GaAs. Thus, the presence of gold contributes only as field localization effect, but do not contributes directly as SH generator

Resonant Absorption in GaAs-Based Nanowires by Means of Photo-Acoustic Spectroscopy

Semiconductor nanowires made of high refractive index materials can couple the incoming light to specific waveguide modes that offer resonant absorption enhancement under the bandgap wavelength, essential for light harvesting, lasing and detection applications. Moreover, the non-trivial ellipticity of such modes can offer near field interactions with chiral molecules, governed by near chiral field. These modes are therefore very important to detect. Here, we present the photo-acoustic spectroscopy as a low-cost, reliable, sensitive and scattering-free tool to measure the spectral position and absorption efficiency of these modes. The investigated samples are hexagonal nanowires with GaAs core; the fabrication by means of lithography-free molecular beam epitaxy provides controllable and uniform dimensions that allow for the excitation of the fundamental resonant mode around 800 nm. We show that the modulation frequency increase leads to the discrimination of the resonant mode absorption from the overall absorption of the substrate. As the experimental data are in great agreement with numerical simulations, the design can be optimized and followed by photo-acoustic characterization for a specific application

Hybrid thermal Yagi-Uda nanoantennas for directional and narrow band long-wavelength IR radiation sources

We investigate the possibility of spatially and spectrally controlling the thermal infrared emission by exploitation of the Yagi-Uda antenna design. Hybrid antennas composed of both SiC and Au rods are considered and the contributions of emission from all the elements, at a given equilibrium temperature, are taken into account. We show that the detrimental effect due to thermal emission from the not ideal parasitic elements drastically affect the performances of conventional thermal Au antennas in the 12 μm wavelength range. Nevertheless, our results show that the hybrid approach allows the development of efficient narrow-band and high directivity sources. The possibility of exploiting the Yagi-Uda design both in transmission and in reception modes, may open the way to the realization of miniaturized, efficient, robust and cheap sensor devices for mass-market applications. 2020 Optical Society of America

Quantitative evaluation of emission properties and thermal hysteresis in the mid-infrared for a single thin film of vanadium dioxide on a silicon substrate

We present a comparative study of the emission properties of a vanadium dioxide thin film (approximately 200 nm) deposited on a silicon wafer in different sub-spectral-ranges of the mid-infrared, with particular attention to the windows of transparency of the atmosphere to the infrared radiation (i.e., 3–5 μm, 8–12 μm). The infrared emission properties of the structure are closely related to the well-known phase transition of the first order, from semiconductor to metal, of the vanadium dioxide around the temperature of 68 °C. The characterization of the emissivity in the sub-regions of the mid-infrared was carried out both in the front configuration, that is on the VO2 film side, and in the rear configuration on the silicon wafer side, and showed a strong difference in the hysteresis thermal bandwidth, in particular between the short wave region and the long wave region. The bandwidth is equal to 12 °C for the front and 15 °C for the rear. The emissivity behaviors as a function of temperature during the semiconductor-metal transition in the mid-infrared subregions were analyzed and explained using the theories of the effective medium of Maxwell Garnett and Bruggeman, highlighting the greater functionality of one theory with respect to the other depending on the spectral detection band

Control of Au nanoantenna emission enhancement of magnetic dipolar emitters by means of VO2 phase change layers

Active, ultra-fast external control of the emission properties at the nanoscale is of great interest for chip-scale, tunable and efficient nanophotonics. Here we investigated the emission control of dipolar emitters coupled to a nanostructure made of an Au nanoantenna, and a thin vanadium dioxide (VO2) layer that changes from semiconductor to metallic state. If the emitters are sandwiched between the nanoantenna and the VO2 layer, the enhancement and/or suppression of the nanostructure’s magnetic dipole resonance enabled by the phase change behavior of the VO2 layer can provide a high contrast ratio of the emission efficiency. We show that a single nanoantenna can provide high magnetic field in the emission layer when VO2 is metallic, leading to high emission of the magnetic dipoles; this emission is then lowered when VO2 switches back to semiconductor. We finally optimized the contrast ratio by considering different orientation, distribution and nature of the dipoles, as well as the influence of a periodic Au nanoantenna pattern. As an example of a possible application, the design is optimized for the active control of an Er3+ doped SiO2 emission layer. The combination of the emission efficiency increase due to the plasmonic nanoantenna resonances and the ultra-fast contrast control due to the phase-changing medium can have important applications in tunable efficient light sources and their nanoscale integration

Quantitative and Qualitative Assessments of Retinal Structure with Variable A-Scan Rate Spectralis OCT: Insights into IPL Multilaminarity

The aim of this study was to evaluate the qualitative and quantitative differences between 20 and 85 kHz A-scan rate optical coherence tomography (OCT) images acquired by spectral domain OCT. The study included 60 healthy subjects analyzed with horizontal linear scans with a variable A-scan rate (SHIFT technology, Heidelberg Engineering, Heidelberg, Germany). The retinal thickness measurement of each retinal layer was performed in three different positions (subfoveal, nasal, and temporal). The qualitative assessment was performed by two independent observers who rated every image with a score ranging from 1 ("sufficient") to 3 ("excellent") on the basis of three parameters: visualization of the vitreo-retinal interface, characterization of the retinal layers, and visualization of the sclero-choroidal interface. No statistically significant differences in terms of retinal layer thickness between the two A-scan rate scans were observed (p > 0.05). The coefficient of variation of the retinal thickness values was lower in the 20 kHz group (25.8% versus 30.1% with the 85 kHz). The 20 kHz images showed a higher quality index for both observers. An inner plexiform layer (IPL) multilaminarity was detected in 78.3% of patients from the 20 kHz group and in 40% of patients from the 85 kHz group (p < 0.05)

Asymmetric transmission and anomalous refraction in metal nanowires metasurface

Here we investigated the asymmetric transmission and the anomalous refraction introduced by a metasurface of bent gold nanowires. The refraction follows the generalized Snell's law that takes into account the resonant behavior of metallic nanostructures located at the interface between two dielectrics. Measurements performed in the linear optical regime reveal a large sensitivity to the subwavelength features of the gold nanostructures

Robust computer vision system for marbling meat segmentation

In this study, we developed a robust automatic computer vision system for marbling meat segmentation. Our approach can segment muscle fat in various marbled meat samples using images acquired with different quality devices in an uncontrolled environment, where there was external ambient light and artificial light; thus, professionals can apply this method without specialized knowledge in terms of sample treatments or equipment, as well as without disruption to normal procedures, thereby obtaining a robust solution. The proposed approach for marbling segmentation is based on data clustering and dynamic thresholding. Experiments were performed using two datasets that comprised 82 images of 41 longissimus dorsi muscles acquired by different sampling devices. The experimental results showed that the computer vision system performed well with over 98% accuracy and a low number of false positives, regardless of the acquisition device employed

Second harmonic generation from metallo-dielectric multilayer photonic band gap structures

We experimentally and theoretically investigate the second order nonlinear optical response of metallo-dielectric multilayer structures composed of Ag and Ta2O5 layers, deposited by magnetron sputtering. Second harmonic generation measurements were performed in reflection mode as a function of incidence angle, using femtosecond pulses originating from a Ti:Sapphire laser system tuned at 800 nm. The dependence of the generated signal was investigated as a function of pump intensity and polarization state. Our experimental results show that the conversion efficiency from a periodic metallo-dielectric sample may be enhanced by at least a factor of 30 with respect to the conversion efficiency from a single metal layer, thanks in part to the increased number of active surfaces, pump field localization and penetration inside the metal layers. The conversion efficiency maximum shifts from 70 degrees for the single silver layer down to approximately 55 degrees for the stack. The experimental results are found to be in good agreement with calculations based on coupled Maxwell-Drude oscillators under the action of a nonlinear Lorentz force term