Magnetic-field effects in defect-controlled ferromagnetic Ga_{1-x}Mn_xAs semiconductors

We have studied the magnetic-field and concentration dependences of the magnetizations of the hole and Mn subsystems in diluted ferromagnetic semiconductor Ga_{1-x}Mn_xAs. A mean-field approximation to the hole-mediated interaction is used, in which the hole concentration p(x) is parametrized in terms of a fitting (of the hole effective mass and hole/local moment coupling) to experimental data on the Tc critical temperature. The dependence of the magnetizations with x, for a given temperature, presents a sharply peaked structure, with maxima increasing with applied magnetic field, which indicates that application to diluted-magnetic-semiconductor devices would require quality-control of the Mn-doping composition. We also compare various experimental data for Tc(x) and p(x) on different Ga_{1-x}Mn_xAs samples and stress the need of further detailed experimental work to assure that the experimental measurements are reproducible.Comment: RevTeX 4, 3 two-column pages, 4 colour figures; to appear in J Appl Phy

A casa-grande e o sobrado na obra de Gilberto Freyre

Casa Grande & Senzala completou em 1983 cinqüenta anos de serviços prestados ao leitor brasileiro. Ao todo, vinte e duas edições no Brasil. Sobrados e Mocambos fará seu cinqüentenário em 1986, precedido de inúmeras edições. Juntas, estas duas obras traçam a interpretação gilbertiana do passado escravista e senhorial do Brasil. São obras irmãs. A contribuição destes dois grandes ensaios deve ser analisada em seu conjunto. É a estes dois ensaios ”” talvez o filão mais rico da obra extraordinária de Gilberto Freyre ”” que dedico a maior parte do presente trabalho. Aqui e ali, lanço mão de outros livros que são parte do mesmo filão, ainda que não revelem a mesma força, o mesmo viço das obras de 1933 e 1936. O critério adotado foi o de examinar um dentre muitos Gilbertos ”” aquele que estudou o Brasil senhorial e escravocrata, que se debruçou sobre colonizadores e colonizados nos trópicos, sobre o sistema de produção da monocultura e do latifúndio, sobre a estrutura de dominação patriarcal

Imigração e médicos italianos em São Paulo na primeira república

The European immigration to the southeastern region of Brazil due to the necessity of labor in the coffee plantations in the last decades of the 19th century and beginning of the 20 is a well-kown topic of study. But what still remains to be explored is the relation between immigration and the sanitary reform that took place at the time. The state of São Paulo has a very sad story of Italian immigrants exposed to the virulance of the transmissible diseases. This caotic situation was the beginning of a movement for the health reform. The farmers considered immigration a vital input to the coffee economy and there was a strong commitment of the urban elites and the national government to show the world that Brazil wanted to erase its bad public health reputation. Reformists and their actions elected the European Immigrant as the first target for health improvement. This paper presents some data related to such actions and analyses the way foreign countries – particularly Italy – sent medical and other missions to evaluate and improve the health conditions of their countrymen, workers in the rural and urban areas in Brazil. A phenomenon related to the efforts of the health inspectors was the consolidation of a fairly large “Italian” medical profession and the opening of “Italian” hospitals in São Paulo and other parts in Brazil. These two aspects of the beginning of the public health movement in Brazil – the impact of immigration and the setting up of the medical profession - are the main focus of analysis inthis paper.A imigração européia para a região sudeste do país, que foi responsável pela introdução da mão-de-obra assalariada, para atender às necessidades da cultura cafeeira, nas últimas décadas do século XIX e primeiras do século XX, tem sido suficientemente estudada pela historiografia da imigração. O que tem sido explorado em menor grau, é a inter-relação entre a imigração e a reforma sanitária que ocorreu no período. O estado de São Paulo, particularmente, foi palco de uma triste história de imigrantes italianos chegados e expostos à virulência das epidemias. Esse foi o ponto de partida para o início do movimento de reforma da saúde pública. Os fazendeiros consideravam a imigração uma necessidade vital para a economia cafeeira, havendo um consenso bastante forte entre as elites e o governo da necessidade de mostrar ao mundo que o Brasil estava disposto a combater sua má reputação em matéria de saúde pública. O pensamento reformista e a ação elegeramos imigrantes como principal alvo da política de saúde. Desta forma, o presente trabalho apresenta dados sobre essas ações e discute a maneira como os países estrangeiros – particularmente a Itália – enviaram ao Brasil agentes e inspetores, médicos, engenheiros e outros profissionais, no sentido de verificarem as reais condições de vida, de trabalho e de saúde de seus conterrâneos tanto nas áreas rurais como nas urbanas. Um dos fenômenos que resultaram dos esforços dos inspetores sanitários foi a consolidação de um mercado de trabalho para médicos italianos e a abertura de hospitais italianos em São Paulo e outras regiões do estado. O impacto da imigração e a consolidação da profissão médica, afetados pela vinda desses profissionais a São Paulo, são os focos principais deste trabalho

A combined approach for comparative exoproteome analysis of Corynebacterium pseudotuberculosis

Background: Bacterial exported proteins represent key components of the host-pathogen interplay. Hence, we sought to implement a combined approach for characterizing the entire exoproteome of the pathogenic bacterium Corynebacterium pseudotuberculosis, the etiological agent of caseous lymphadenitis (CLA) in sheep and goats. Results: An optimized protocol of three-phase partitioning (TPP) was used to obtain the C. pseudotuberculosis exoproteins, and a newly introduced method of data-independent MS acquisition (LC-MSE) was employed for protein identification and label-free quantification. Additionally, the recently developed tool SurfG+ was used for in silico prediction of sub-cellular localization of the identified proteins. In total, 93 different extracellular proteins of C. pseudotuberculosis were identified with high confidence by this strategy; 44 proteins were commonly identified in two different strains, isolated from distinct hosts, then composing a core C. pseudotuberculosis exoproteome. Analysis with the SurfG+ tool showed that more than 75% (70/93) of the identified proteins could be predicted as containing signals for active exportation. Moreover, evidence could be found for probable non-classical export of most of the remaining proteins. Conclusions: Comparative analyses of the exoproteomes of two C. pseudotuberculosis strains, in addition to comparison with other experimentally determined corynebacterial exoproteomes, were helpful to gain novel insights into the contribution of the exported proteins in the virulence of this bacterium. The results presented here compose the most comprehensive coverage of the exoproteome of a corynebacterial species so far

Quantification and source identification of atmospheric particulate polycyclic aromatic hydrocarbons and their dry deposition fluxes at three sites in Salvador Basin, Brazil, impacted by mobile and stationary sources

The present work has aimed to determine the 16 US EPA priority PAH atmospheric particulate matter levels present in three sites around Salvador, Bahia: (i) Lapa bus station, strongly impacted by heavy-duty diesel vehicles; (ii) Aratu harbor, impacted by an intense movement of goods, and (iii) Bananeira village on Maré Island, a non vehicle-influenced site with activities such as handcraft work and fisheries. Results indicated that BbF (0.130-6.85 ng m-3) is the PAH with highest concentration in samples from Aratu harbor and Bananeira and CRY (0.075-6.85 ng m-3) presented higher concentrations at Lapa station. PAH sources from studied sites were mainly of anthropogenic origin such as gasoline-fueled light-duty vehicles and diesel-fueled heavy-duty vehicles, discharges in the port, diesel burning from ships, dust ressuspension, indoor soot from cooking, and coal and wood combustion for energy production.O presente trabalho apresenta o estudo sobre 16 HPAs prioritários em material particulado atmosférico de três sítios próximos a Salvador-BA: (i) Estação da Lapa, estação de ônibus da Região Metropolitana de Salvador; (ii) Porto de Aratu, impactado por intenso movimento de matérias-primas e (iii) Bananeira, localizado na Ilha de Maré, vilarejo que tem como principais atividades a pesca e artesanato. Resultados mostraram que o BbF (0,130-6,85 ng m-3) foi o HPA com as concentrações mais elevadas em Aratu e Bananeira e CRY (0,075-6,85 ng m-3) apresentou nível mais elevado na Lapa. As fontes de HPAs nos sítios estudados foram principalmente de origem antrópica, tais como veículos de pequeno e grande portes, carregamentos do porto, ressuspensão de partículas do solo, queima de diesel das embarcações e a queima de carvão e madeira para produção de energia.CNPqCoordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)FINEPFAPESBPRONEXRECOMBIONordeste GenerationANEELFAPES

Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit

This paper presents the design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit (Co-TSE). Single screw print heads were developed in the mid-2000s as an alternative to filament-based 3D printers, but they have limited process flexibility and mixing capacity. The new design accepts material in powder or micro-pellet form, and its dispersive and distributive mixing capacity can be fine tuned by setting output and screw rotation speed independently. The design combines a miniaturized modular Co-TSE operated under starve-fed conditions with a benchtop Cartesian platform. Numerical calculations were performed to ascertain whether the appropriate thermomechanical environment for polymer processing could be created by the proposed design. A prototype was built and extrusion tests were performed under different operating conditions, using polypropylene and a 90/10 wt% polypropylene/polystyrene blend. Two screw configurations were used, with and without kneading discs, to assess the response of the extrusion unit in terms of flow characteristics and mixing performance. The restriction to flow created by the mixing elements determines the starting melt position, and the average residence times, while their shearing and extensional action enhances homogenization effectiveness. The screw configuration and rotation speed do not affect the output, which depends only on the feed rate. Preliminary deposition tests were conducted to determine the feasible printing parameters. A standard tensile test specimen, a square scaffold and a multicolored rectangular box were successfully printed, validating the innovative design. The mechanical properties of printed test specimens were within the expected values.This work was supported by the National Council for Scientific and Technological Development (CNPq), grants 2016-4/442109 and 142348/2018-0, and by the Coordination for the Improvement of Higher Education Personnel (CAPES), finance code 001

Fractional Distillation of Organic Liquid Compounds Produced by Catalytic Cracking of Fats, Oils, and Grease

This work aims to investigate the fractional distillation of organic liquid products (OLP) obtained by catalytic cracking of palm oil (Elaeis guineensis Jacq.) at 450°C, 1.0 atm, with 5, 10, and 15% (wt) Na2CO3, using a stirred tank reactor of 143 L. The fractional distillations of OLP were carried out in laboratory scale with and without reflux using columns of different heights, and a pilot‐packed distillation column with internal reflux. OLP and distillation fractions (gasoline, kerosene, light diesel, and heavy diesel) were physicochemically characterized for density, kinematic viscosity, acid value, saponification value, refractive index, flash point, and copper strip corrosion. The OLP and light diesel fractions were analyzed by Fourier transform infrared spectroscopy (FT‐IR) and gas chromatography‐mass spectrometry (GC‐MS). For the experiments in laboratory scale, the yields of distillates decrease along with column height, with and without reflux, while those of bottoms products increase. The yields of distillates and gas increase with increasing Na2CO3 content, while those of bottoms products decrease. The densities of gasoline, kerosene, and light diesel produced in laboratory scale with reflux superpose exactly those of kerosene, light diesel, and heavy diesel produced in laboratory scale without reflux. The kinematic viscosity decreases with increasing column height for the experiments in laboratory scale. The acid values of distillation fractions decrease along with the column height for the experiments with and without reflux. The FT‐IR of distillation fractions in pilot and laboratory scales identified the presence of aliphatic hydrocarbons and oxygenates. The GC‐MS analysis identified OLP composition of 92.84% (area) hydrocarbons and 7.16% (area) oxygenates. The light diesel fraction contains 100% hydrocarbons with an acid value of 0.34 mg KOH/g, proving the technical feasibility of OLP de‐acidification by the fractional distillation process

Ehrlich ascites tumor-bearing mice treated with aqueous ethanol plant extract from Euphorbia tirucalli showed signs of systemic toxicity

Purpose: To evaluate the antitumor effect of a latex extract from Euphorbia tirucalli Linn. (Euphorbiaceae) and its toxicity.Methods: Aqueous ethanol and petroleum ether extracts were obtained through maceration. .Maximum tolerated dose was determined in healthy mice. Antitumor activity was measured in Ehrlich ascites tumor-bearing mice treated with the extract through intraperitoneal injection (62.5, 125 or 250 mg/kg) every 48 h (four doses). Efficacy was assessed by weight gain, abdominal circumference, volume of ascitic fluid and packed tumor cells, tumor cell viability and survival. Toxicity indicators were serum glucose, triglycerides, total proteins, activity of alanine and aspartate aminotransferases and mass of heart, spleen, kidney and liver. A hemolysis assay was also performed.Results: Doses of 62.5 and 125 mg/kg caused no antitumor activity, while 250 mg/kg dose reduced weight gain (3-fold), abdominal circumference and volume of ascitic fluid (> 50 %) and packed cells (50 %), but lowered tumor cell viability (40 %). However, mice treated with the extract survived for a shorter time than control mice. Furthermore, the 250 mg/kg dose caused cardiac atrophy, splenomegaly and fasting hyperglycemia. The extract caused hemolysis, and the half-maximal effective concentration (EC50) was 1.6 (0.9 – 2.7) mg/mL.Conclusion: Euphorbia tirucalli extract inhibits Ehrlich ascites tumor in mice, but the therapeutic dose is also harmful to non-tumor tissues.Keywords: Euphorbia tirucalli, Ehrlich ascites tumor-bearing mice, Antitumor, Toxicity, Cardiac atrophy, Splenomegal

Soil organisms in organic and conventional cropping systems.

Apesar do crescente interesse pela agricultura orgânica, são poucas as informações de pesquisa disponíveis sobre o assunto. Assim, num Argissolo Vermelho-Amarelo distrófico foram comparados os efeitos de sistemas de cultivo orgânico e convencional, para as culturas do tomate (Lycopersicum esculentum) e do milho (Zea mays), sobre a comunidade de organismos do solo e suas atividades. As populações de fungos,bactérias e actinomicetos, determinadas pela contagem de colônias em meio de cultura, foram semelhantes para os dois sistemas de produção. A atividade microbiana, avaliada pela evolução de CO2, manteve-se superior no sistema orgânico, sendo que em determinadas avaliações foi o dobro da evolução verificada no sistema convencional. O número de espécimes de minhoca foi praticamente dez vezes maior no sistema orgânico. Não foi observada diferença na taxa de decomposição de matéria orgânica entre os dois sistemas. De modo geral, o número de indivíduos de microartrópodos foi superior no sistema orgânico do que no sistema convencional, refletindo no maior índice de diversidade de Shannon. As maiores populações de insetos foram as da ordem Collembola, enquanto para os ácaros a maior população foi a da superfamília Oribatuloidea. Indivíduos dos grupos Aranae, Chilopoda, Dyplopoda, Pauropoda, Protura e Symphyla foram ocasionalmente coletados e de forma similar entre os sistemas