A calculation methodology for the determination of the dynamic alongwind response of tall structures under wind action

La optimización de los métodos de cálculo, junto al avance de la tecnología en la construcción de estructuras civiles, permiten actualmente diseñar y construir estructuras cada vez más livianas, de baja rigidez y amortiguamiento, transformándolas en elementos altamente sensibles a los efectos dinámicos inducidos por la acción del viento. El objetivo de este trabajo es el de describir y aplicar una metodología sencilla de cálculo que permita la determinación de la respuesta dinámica longitudinal en el dominio del tiempo de estructuras altas sometidas a la acción del viento. El campo de velocidad de viento se reproduce mediante series de velocidad que incluyen la función de coherencia, para luego transformarlas en fuerzas nodales fluctuantes utilizando el modelo de carga cuasi-estático. Para incluir el efecto de promediado imperfecto asociado a los nodos discretizados, se incorpora además la función de admitancia aerodinámica. Mediante la metodología propuesta se analizan dos estructuras ampliamente estudiadas por otros autores, las cuales consisten en una torre de acero y el CAARC Standard Tall Building. Los resultados así obtenidos presentan concordancia con los reportados por la bibliografía de referencia.The optimization of computing methods along with the advance of construction technology of civil structures, allow nowadays to design and build lighter and low stiffness and damping structures, turning them into elements of high sensitivity against wind-induced dynamic effects. The purpose of this work is to describe and to apply a simple calculation methodology that enables the determination of the longitudinal dynamic response of tall buildings in time domain. The wind velocity field is reproduced by velocity series that incorporate the coherence function which then are transformed into fluctuating nodal forces using the quasi-static loading model. Furthermore, to include the effect of imperfect averaging associated with the discretized nodes, the aerodynamic admittance function is added. Through the proposed methodology two structures widely studied by other authors are analyzed: a steel tower and the CAARC Standard Tall Building. The results thus obtained show agreement with those reported in the literature.Peer Reviewe

Comparison between the thermal properties of cement composites using infrared thermal images

The use of agribusiness residual lignocellulosic fibres can be a good alternative in the development of lignocellulosic composites. The current work aimed to investigate the thermal performance of cement-based composites with lignocellulosic materials: Eucalyptus, sugarcane bagasse, coconut fibre in comparison with commercial gypsum board to be used as internal partitions of the building using infrared thermal images. Three repetitions for each kind of lignocellulosic material were made, and three commercial gypsum boards were used. In the production of the panels, the following parameters were applied: material and cement ratio, 1:2.75; water and cement ratio, 1:2.5; hydration water rate of 0.25; additive, 4% (based on cement mass). The calculations were performed for a nominal panel density of 1,200 kg m- ³. The thermal analysis was performed in a chamber composed of MDP (Medium-Density Particleboard) and with an internal layer of rock wool and the heat source (thermal resistance). For the superficial temperature measurement, a FLIR E75 camera was used to capture the infrared images. When the internal temperature of the chamber stabilized at 50 °C, an infrared thermal image was collected from each side of the composite. Thermal properties were analysed: thermal conductivity, resistivity, resistance, and transmittance. Based on the results, sugar cane cement composites were characterized by higher values of thermal conductivity. Related to thermal resistivity, thermal resistance, and thermal transmittance, only the coconut panel presented similar behaviour to the commercial gypsum board. Thus, cement composite using coconut can be a potential alternative that might solve energy and environmental concerns simultaneously

Bibliometric analysis on the use of natural fibers in construction materials

Received: February 2nd, 2021 ; Accepted: August 3rd, 2021 ; Published: August 30th, 2021 ; Correspondence: [email protected] to the increasing interest of the population in the sustainability theme, there was a consequent growth in publications related to the theme in the area of civil construction. Agroindustrial waste has become an environmental problem, and with that natural fibers have found space in the reuse of waste due to its characteristics and possibilities of improving the mechanical properties of its products. In order to achieve sustainable construction demand, along with the need to reuse waste, studies have begun to analyze the application of natural fibers in construction materials. The documents provided by the Web of Science (WOS) database through research carried out with the search for the terms ‘Natural Fibers’ and ‘Building materials’ restricted to the period 2010–2020 in the main WOS collection. The institutions involved with the publications, the countries of origin of the documents, the year of publication, the keywords used by the authors and the number of citations for each document were analyzed using bibliometrics in the VOSVIEWER (VOS) software. The result of the analysis shows an increase in documents related to the theme over the years, and that the countries with the most studies in the area are China (16), USA (14) and Brazil (11), respectively. The results presented after analysis of the keywords show that natural fiber (61 occurrences), mechanical properties (44 occurrences) and composites (31 occurrences) are the words with the highest occurrence among the analyzed documents. The present study shows the growth of research related to the theme, in addition to discriminating countries, institutions and authors, which allows monitoring the scientific expansion of the theme and guiding future studies

Numerical analysis of the crosswind in small solar chimney

The solar chimney (or solar updraft tower) consists of a circular solar collector, a tower in the center of the collector, and turbines installed in the collector output or the tower entrance. The solar radiation passes through the translucent collector, reaches the ground surface and heats it. The air within the device is heated by the radiation emitted by the ground and by convection currents formed under the collector. The thermal energy is stored in the absorber layer of the ground when there is incidence of solar radiation and it is released from the ground when solar radiation is low. The density difference between the hot air inside the device and the ambient air creates convection currents that drive the air in the collector from the base to the top of the tower. Finally, the airflow in the tower drives the turbines which are coupled to electrical generators. The environmental winds influence the performance of the solar updraft towers in three main ways: heat losses by convection from the outer surface of the collector to the environment, heated air drag out of the cover and drag on the top of the chimney generating a suction effect and enhancing the upward flow in the tower. This work studied the influence of crosswinds on the system flow conditions through a numerical analysis using CFD. Results indicate that an increase on the environmental crosswinds speed from 0 to 25 m/s decreased the outlet temperature of the device in 0.3% and increased the outlet velocity in 50.26%, increasing the energetic efficiency of the device in 56.31%.Papers presented to the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Costa de Sol, Spain on 11-13 July 2016

Magnetic Catalysis: A Review

We give an overview of the magnetic catalysis phenomenon. In the framework of quantum field theory, magnetic catalysis is broadly defined as an enhancement of dynamical symmetry breaking by an external magnetic field. We start from a brief discussion of spontaneous symmetry breaking and the role of a magnetic field in its a dynamics. This is followed by a detailed presentation of the essential features of the phenomenon. In particular, we emphasize that the dimensional reduction plays a profound role in the pairing dynamics in a magnetic field. Using the general nature of underlying physics and its robustness with respect to interaction types and model content, we argue that magnetic catalysis is a universal and model-independent phenomenon. In support of this claim, we show how magnetic catalysis is realized in various models with short-range and long-range interactions. We argue that the general nature of the phenomenon implies a wide range of potential applications: from certain types of solid state systems to models in cosmology, particle and nuclear physics. We finish the review with general remarks about magnetic catalysis and an outlook for future research.Comment: 37 pages, to appear in Lect. Notes Phys. "Strongly interacting matter in magnetic fields" (Springer), edited by D. Kharzeev, K. Landsteiner, A. Schmitt, H.-U. Yee. Version 2: references adde

Portion Size: What We Know and What We Need to Know

There is increasing evidence that the portion sizes of many foods have increased and in a laboratory at least this increases the amount eaten. The conclusions are, however, limited by the complexity of the phenomenon. There is a need to consider meals freely chosen over a prolonged period when a range of foods of different energy densities are available. A range of factors will influence the size of the portion size chosen: amongst others packaging, labeling, advertising, and the unit size rather than portion size of the food item. The way portion size interacts with the multitude of factors that determine food intake needs to be established. In particular, the role of portion size on energy intake should be examined as many confounding variables exist and we must be clear that it is portion size that is the major problem. If the approach is to make a practical contribution, then methods of changing portion sizes will need to be developed. This may prove to be a problem in a free market, as it is to be expected that customers will resist the introduction of smaller portion sizes, given that value for money is an important motivator

Estimation of Admission D-dimer Cut-off Value to Predict Venous Thrombotic Events in Hospitalized COVID-19 Patients: Analysis of the SEMI-COVID-19 Registry

Background: Venous thrombotic events (VTE) are frequent in COVID-19, and elevated plasma D-dimer (pDd) and dyspnea are common in both entities. Objective: To determine the admission pDd cut-off value associated with in-hospital VTE in patients with COVID-19. Methods: Multicenter, retrospective study analyzing the at-admission pDd cut-off value to predict VTE and anticoagulation intensity along hospitalization due to COVID-19. Results: Among 9386 patients, 2.2% had VTE: 1.6% pulmonary embolism (PE), 0.4% deep vein thrombosis (DVT), and 0.2% both. Those with VTE had a higher prevalence of tachypnea (42.9% vs. 31.1%; p = 0.0005), basal O2 saturation <93% (45.4% vs. 33.1%; p = 0.0003), higher at admission pDd (median [IQR]: 1.4 [0.6–5.5] vs. 0.6 [0.4–1.2] µg/ml; p < 0.0001) and platelet count (median [IQR]: 208 [158–289] vs. 189 [148–245] platelets × 109/L; p = 0.0013). A pDd cut-off of 1.1 µg/ml showed specificity 72%, sensitivity 49%, positive predictive value (PPV) 4%, and negative predictive value (NPV) 99% for in-hospital VTE. A cut-off value of 4.7 µg/ml showed specificity of 95%, sensitivity of 27%, PPV of 9%, and NPV of 98%. Overall mortality was proportional to pDd value, with the lowest incidence for each pDd category depending on anticoagulation intensity: 26.3% for those with pDd >1.0 µg/ml treated with prophylactic dose (p < 0.0001), 28.8% for pDd for patients with pDd >2.0 µg/ml treated with intermediate dose (p = 0.0001), and 31.3% for those with pDd >3.0 µg/ml and full anticoagulation (p = 0.0183). Conclusions: In hospitalized patients with COVID-19, a pDd value greater than 3.0 µg/ml can be considered to screen VTE and to consider full-dose anticoagulation. © 2021, Society of General Internal Medicine

Photocatalytic fabrics based on reduced graphene oxide and TiO2 coatings

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.mseb.2015.04.013The purpose of this work is to obtain photocatalytic fabrics based on reduced graphene oxide (RGO) and TiO2 coatings on polyester fabrics. The influence of the applied number of RGO coatings on properties such as light absorption, conductivity, electroactivity and photocatalytic properties of the fabrics was established. An improvement of these properties with the number of RGO coatings applied was obtained. FESEM, EDX, XPS and FTIR-ATR showed the incorporation of the TiO2 nanoparticles on the fabrics. FTIR-ATR showed the formation of a bidentate carboxylic ligand with titanium atoms. The photocatalytic properties of the fabrics were tested with Rhodamine B dye solutions. Photocatalytic efficiency increased with the number of RGO coatings, due to the increased light absorption, and better electrical properties. The charge transfer resistance (Rct) and its time constant (τ) decreased, indicating a better electron transfer which helps to increase the lifetime of the pair electron/hole.Authors wish to thank to the Spanish Ministerio de Ciencia e Innovación (contract CTM2011-23583) for the financial sup port. J. Molina is grateful to the Conselleria d’Educació, Formació i Ocupació (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship. Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for help with FESEM and EDX characterization. Timothy Vickers is gratefully acknowledged for help with English revision.info:eu-repo/semantics/publishedVersio