Fraction eutectic measurements in slowly cooled Pb - 15 wt percent Sn alloys

A space shuttle experiment employing the General Purpose Furnace in its isothermal mode of operation is currently manifested for flight circa 1989. The aim of this experiment was to investigate the role of gravity in a slowly, and isothermally, cooled sample of a binary Pb - 15 wt percent Sn alloy. Ground based work in support of the microgravity experiment is discussed. In particular, it is shown that fraction eutectic measurements using an image analyzer, can be used to satisfactorily describe macrosegregation occurring in these slowly cooled ingots

Representation of Normal Cone Inclusion Problems in Dynamics Via Non-linear Equations

Analyzing non-smooth mechanical systems requires often the solution of inclusion problems of normal cone type. These problems arise for example in the event-driven or time-stepping simulation approaches. Such inclusion problems can be written as non-linear equations, which can be solved iteratively. In this paper we discuss three different methods to derive the non-linear equations representing the inclusions arising in the event-driven simulation approach. First, we formulate inclusions describing the individual non-smooth constraints and solve them successively. Secondly, we interpret the non-linear equations as the conditions for the saddle point of the augmented Lagrangian function. As a third possibility we discuss the exact regularization of set-valued force laws. All three methods lead to the same numerical scheme, but give different insight into the problem. Especially the factor r occurring in the non-linear equations is discussed. Two iterative methods for solving the non-linear equations are presented together with some remarks on convergenc

Frequency-selective single photon detection using a double quantum dot

We use a double quantum dot as a frequency-tunable on-chip microwave detector to investigate the radiation from electron shot-noise in a near-by quantum point contact. The device is realized by monitoring the inelastic tunneling of electrons between the quantum dots due to photon absorption. The frequency of the absorbed radiation is set by the energy separation between the dots, which is easily tuned with gate voltages. Using time-resolved charge detection techniques, we can directly relate the detection of a tunneling electron to the absorption of a single photon

How are medical students learning to care for patients with intellectual disabilities? A scoping review

BackgroundIndividuals with intellectual disabilities experience barriers to quality healthcare. To reduce this disparity, equipping medical trainees with the knowledge and skills required for treating this patient population is critical. Our aim is to describe the breadth of instructional interventions and identify gaps in intellectual disability medical education curricula.MethodUsing scoping review methods, the intellectual disability programmes described in 27 articles were evaluated and their coverage of the six core competencies on disability for health care education was examined.ResultsThe most frequently represented core competencies were disability conceptual frameworks, professionalism and communication, and clinical assessment, which were, in most programmes, fulfilled by activities involving individuals with intellectual disabilities. Uneven competency coverage warrants consideration.ConclusionsConsiderable variabilities exist in medical school curricula on intellectual disabilities. Using core competencies on disability for health care education for curricular design and evaluation would provide a coherent training experience in this important area

Inner ear tissue preservation by rapid freezing: improving fixation by high-pressure freezing and hybrid methods

In the preservation of tissues in as ‘close to life’ state as possible, rapid freeze fixation has many benefits over conventional chemical fixation. One technique by which rapid freeze-fixation can be achieved, high pressure freezing (HPF), has been shown to enable ice crystal artefact-free freezing and tissue preservation to greater depths (more than 40μm) than other quick-freezing methods. Despite increasingly becoming routine in electron microscopy, the use of HPF for the fixation of inner ear tissue has been limited. Assessment of the quality of preservation showed routine HPF techniques were suitable for preparation of inner ear tissues in a variety of species. Good preservation throughout the depth of sensory epithelia was achievable. Comparison to chemically fixed tissue indicated that fresh frozen preparations exhibited overall superior structural preservation of cells. However, HPF fixation caused characteristic artefacts in stereocilia that suggested poor quality freezing of the actin bundles. The hybrid technique of pre-fixation and high pressure freezing was shown to produce cellular preservation throughout the tissue, similar to that seen in HPF alone. Pre-fixation HPF produced consistent high quality preservation of stereociliary actin bundles. Optimising the preparation of samples with minimal artefact formation allows analysis of the links between ultrastructure and function in inner ear tissues

Low Power Magnetic Bearing Design for High Speed Rotating Machinery

Magnetic suspension technology has advanced to the point of being able to offer a number of advantages to a variety of applications in the rotating machinery and aerospace fields. One strong advantage is the decrease in power consumption. The design and construction of a set of permanent magnet biased, actively controlled magnetic bearing for a flexible rotor are presented. Both permanent magnets and electromagnets are used in a configuration which effectively provides the necessary fluxes in the appropriate air gaps, while simultaneously keeping the undesirable destabilizing forces to a minimum. The design includes two radial bearings and a thrust bearing. The theoretical development behind the design is briefly discussed. Experimental performance results for a set of operating prototype bearings is presented. The results include measurements of load capacity, bearing stiffness and damping, and the dynamic response of the rotor. With few exceptions, the experimental results matched very well with the predicted performance. The power consumption of these bearings was found to be significantly reduced from that for a comparable set of all electromagnetic bearings

A comparative study of satellite and ground-based phenology

Long time series of ground-based plant phenology, as well as more than two decades of satellite-derived phenological metrics, are currently available to assess the impacts of climate variability and trends on terrestrial vegetation. Traditional plant phenology provides very accurate information on individual plant species, but with limited spatial coverage. Satellite phenology allows monitoring of terrestrial vegetation on a global scale and provides an integrative view at the landscape level. Linking the strengths of both methodologies has high potential value for climate impact studies. We compared a multispecies index from ground-observed spring phases with two types (maximum slope and threshold approach) of satellite-derived start-of-season (SOS) metrics. We focus on Switzerland from 1982 to 2001 and show that temporal and spatial variability of the multispecies index correspond well with the satellite-derived metrics. All phenological metrics correlate with temperature anomalies as expected. The slope approach proved to deviate strongly from the temporal development of the ground observations as well as from the threshold-defined SOS satellite measure. The slope spring indicator is considered to indicate a different stage in vegetation development and is therefore less suited as a SOS parameter for comparative studies in relation to ground-observed phenology. Satellite-derived metrics are, however, very susceptible to snow cover, and it is suggested that this snow cover should be better accounted for by the use of newer satellite sensor

Scaling properties of a low-actuation pressure microfluidic valve

Using basic physical arguments, we present a design and method for the fabrication of microfluidic valves using multilayer soft lithography. These on-off valves have extremely low actuation pressures and can be used to fabricate active functions, such as pumps and mixers in integrated microfluidic chips. We characterized the performance of the valves by measuring both the actuation pressure and flow resistance over a wide range of design parameters, and compared them to both finite element simulations and alternative valve geometries