225 research outputs found
The Use of Remote Sensing Techniques for Monitoring and Characterization of Slope Instability
This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.Understanding changes in slope geometry and knowledge of underlying engineering properties of the rock mass are essential for the safe design of man-made slopes and to reduce the significant risks associated with slope failure. Recent advances in the geomatics industry have provided the capability to obtain accurate, fully geo-referenced three-dimensional datasets that can be subsequently interrogated to provide engineering-based solutions for monitoring of deformation processes, rock mass characterization and additional insight into any underlying failure mechanisms. Importantly, data can also be used to spatially locate and map geological features and provide displacement or deformation rate information relating to movement of critical sections or regions of a slope.
This paper explores the benefits that can be obtained by incorporating different remote sensing techniques and conventional measurement devices to provide a comprehensive database required for development of an effective slope monitoring and risk management program. The integration of different techniques, such as high accuracy discrete point measurement at critical locations, which can be used to complement larger scale less dense three-dimensional survey will be explored. Case studies using a combination of aerial and terrestrial laser scanning, unmanned aerial vehicle and hand-held scanning devices will demonstrate their ability to provide spatial data for informing decision making processes and ensuring compliance with Regulations
Application of Remote Sensing Data for Evaluation of Rockfall Potential within a Quarry Slope
This is the final version. Available on open access from MDPI via the DOI in this recordIn recent years data acquisition from remote sensing has become readily available to the quarry sector. This study demonstrates how such data may be used to evaluate and back analyse rockfall potential of a legacy slope in a blocky rock mass. Use of data obtained from several aerial LiDAR (Light Detection and Ranging) and photogrammetric campaigns taken over a number of years (2011 to date) provides evidence for potential rockfall evolution from a slope within an active quarry operation in Cornwall, UK. Further investigation, through analysis of point cloud data obtained from terrestrial laser scanning, was undertaken to characterise the orientation of discontinuities present within the rock slope. Aerial and terrestrial LiDAR data were subsequently used for kinematic analysis, production of surface topography models and rockfall trajectory analyses using both 2D and 3D numerical simulations. The results of an Unmanned Aerial Vehicle (UAV)-based 3D photogrammetric analysis enabled the reconstruction of high resolution topography, allowing one to not only determine geometrical properties of the slope surface and geomechanical characterisation but provide data for validation of numerical simulations. The analysis undertaken shows the effectiveness of the existing rockfall barrier, while demonstrating how photogrammetric data can be used to inform back analyses of the underlying failure mechanism and investigate potential runout
Application of an integrated geotechnical and topographic monitoring system in the Lorano marble quarry (Apuan Alps, Italy)
PublishedThis is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.geomorph.2015.04.009Accurate slope stability analysis is essential for human activity in high-risk geological contexts. This may, however, not be enough in the case of quarrying where the dynamic and evolving environment also requires effective monitoring. A well-designed monitoring system requires the acquisition of a huge dataset over time, improving knowledge of the study area and helping to refine prediction from stability analysis.This paper reports the implementation of an integrated monitoring system in a marble quarry in the Apuan Alps (Italy) and some of the results obtained. The equipment consists of a traditional geotechnical monitoring system (extensometers, crackmeters and clinometers) and two modern topographic monitoring systems (a terrestrial interferometer and a robotic total station). This work aims to provide in-depth knowledge of the large scale rock mass behaviour as a result of marble exploitation, thereby allowing continuous excavation. The results highlight the importance of integrating different monitoring systems.The present study was undertaken within the framework of the Italian National Research Project PRIN2009, funded by the Ministry of Education, Universities and Research, which involves the collaboration between the University of Siena, “La Sapienza” University of Rome, and USL1 of Massa and Carrara (Mining Engineering Operative Unit - Department of Prevention)
Does trust play a role when it comes to donations? A comparison of Italian and US higher education institutions
Higher education institutions (HEIs) have experienced severe cutbacks in funding over the past few years, with universities examining options for alternative funding streams, such as alumni funding. Identifying the factors influencing their alumni's intentions to invest in their alma mater can be of significant importance when establishing a sustainable revenue stream. Within this context, empirical research on the potential role of trust is scarce. This paper aims to deepen the analysis of the relationship between alumni trust and engagement as well as three outcomes, namely support, commitment, and attitude toward donation. A structural equation model was tested on two samples of US (  = 318) and Italian (  = 314) alumni. Although both countries are affluent and developed countries, the USA has an established tradition of alumni donations, which is not such a developed practice in Italy. For both countries, results confirm that engagement is an antecedent of trust, which in turn leads to the three investigated outcomes (support, commitment, and attitude toward donations). In contrast, the effect of commitment on attitude toward donations is significant only for the USA universities. The paper has interesting theoretical and managerial implications. From a theoretical point of view, the study aims to address a gap concerning the role of trust in the HE context. Managerially, the study has significant implications for universities that want to change alumni attitude toward donations. [Abstract copyright: © Springer Nature B.V. 2020.
Investigation of landslide failure mechanisms adjacent to lignite mining operations in North Bohemia (Czech Republic) through a limit equilibrium/finite element modelling approach
This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.Understanding the impact of data uncertainty is a fundamental part of ensuring safe design of manmade excavations. Although good levels of knowledge are achievable from field investigations and experience, a natural geological environment is subject to intrinsic variability that may compromise the correct prediction of the system response to the perturbations caused by mining, with direct consequences for the stability and safety of the operations. Different types of geoscientific evidence, including geological, geomorphic, geotechnical, geomatics, and geophysical data have been used to develop and perform two-dimensional Limit Equilibrium and Finite Element Method stability analyses of a lignite open-pit mine in North Bohemia (Czech Republic) affected by recent landslides. A deterministic-probabilistic approach was adopted to investigate the effect of uncertainty of the input parameters on model response. The key factors affecting the system response were identified by specific Limit Equilibrium sensitivity analyses and studied in further detail by Finite Element probabilistic analyses and the results were compared. The work highlights that complementary use of both approaches can be recommended for routine checks of model response and interpretation of the associated results. Such an approach allows a reduction of system uncertainty and provides an improved understanding of the landslides under study. Importantly, two separate failure mechanisms have been identified from the analyses performed and verified through comparisons with inclinometer data and field observations. The results confirm that the water table level and material input parameters have the greatest influence on the stability of the slope.This work was supported by the Research Fund for Coal and Steel of the European Union [grant number 752504]
An integrated remote sensing-GIS approach for the analysis of an open pit in the Carrara marble district, Italy: slope stability assessment through kinematic and numerical methods
PublishedJournal Article© 2015 Elsevier Ltd. Over the last decade, terrestrial laser scanning and digital terrestrial photogrammetry techniques have been increasingly used in the geometrical characterization of rock slopes. These techniques provide innovative remote sensing tools which overcome the frequent problem of rock slope inaccessibility. Comprehensive datasets characterizing the structural geological setting and geometry of the slopes can be obtained. The derived information is very useful in rock slope investigations and finds application in a wide variety of geotechnical and mine operations. In this research an integrated remote sensing - GIS approach is proposed for the deterministic kinematic characterization of the Lorano open pit in the Apuan Alps of Italy. Based on the results of geomatic and engineering geological surveys, additional geomechanical analysis using a 3D finite difference method will be presented in order to provide a better understanding of the role of stress-induced damage on slope performance
Contribution of high-resolution virtual outcrop models for the definition of rockfall activity and associated hazard modelling
This is the final version. Available from MDPI via the DOI in this record. Data Availability Statement: The data are contained within the article.The increased accessibility of drone technology and structure from motion 3D scene reconstruction have transformed the approach for mapping inaccessible slopes undergoing active rockfalls and generating virtual outcrop models (VOM). The Poggio Baldi landslide (Central Italy) and its natural laboratory offers the possibility to monitor and characterise the slope to define a workflow for rockfall hazard analysis. In this study, the analysis of multitemporal VOM (2016–2019) informed a rockfall trajectory analysis that was carried out with a physical-characteristic-based GIS model. The rockfall scenarios were reconstructed and then tested based on the remote sensing observations of the rock mass characteristics of both the main scarp and the rockfall fragment inventory deposited on the slope. The highest concentration of trajectory endpoints occurred at the very top of the debris talus, which was constrained by a narrow channel, while longer horizontal travel distances were allowed on the lower portion of the slope. To further improve the understanding of the Poggio Baldi landslide, a time-independent rockfall hazard analysis aiming to define the potential runout associated with several rock block volumetric classes is a critical component to any subsequent risk analysis in similar mountainous settings featuring marly–arenaceous multilayer sedimentary successions and reactivated main landslide scarps.Sapienza University of RomeNHAZCA SrlParco Nazionale delle Foreste Casentinesi, Monte Falterona e CampignaDepartment of Earth Sciences of the University of Rome “Sapienza
Superlinear emission in bare perovskite: amplified spontaneous emission in disordered film versus single crystal lasing
Abstract We present an experimental study concerning the superlinear emission in organic-inorganic halide perovskites. Microphotoluminescence experiments under CW and picosecond excitation condition at low temperature and near field optical photoluminescence spectra at room temperature provide clear evidence of the very different origin of the superlinear regime in disordered films and microplates/microwires. Insights on the origin of modal structures of the emission spectra in the high excitation regime will be given by polarization-resolved photoluminescence experiments
Application of unmanned aerial vehicle data and discrete fracture network models for improved rockfall simulations
This is the final version. Available from the publisher via the DOI in this record.In this research, we present a new approach to define the distribution of block volumes during rockfall simulations. Unmanned aerial vehicles (UAVs) are utilized to generate high-accuracy 3D models of the inaccessible SW flank of the Mount Rava (Italy), to provide improved definition of data gathered from conventional geomechanical surveys and to also denote important changes in the fracture intensity. These changes are likely related to the variation of the bedding thickness and to the presence of fracture corridors in fault damage zones in some areas of the slope. The dataset obtained integrating UAV and conventional surveys is then utilized to create and validate two accurate 3D discrete fracture network models, representative of high and low fracture intensity areas, respectively. From these, the ranges of block volumes characterizing the in situ rock mass are extracted, providing important input for rockfall simulations. Initially, rockfall simulations were performed assuming a uniform block volume variation for each release cell. However, subsequent simulations used a more realistic nonuniform distribution of block volumes, based on the relative block volume frequency extracted from discrete fracture network (DFN) models. The results of the simulations were validated against recent rockfall events and show that it is possible to integrate into rockfall simulations a more realistic relative frequency distribution of block volumes using the results of DFN analyses
Evaluation of Perna perna (Linné, 1758) as a tool to monitoring trace metals contamination in estuarine and coastal waters of Rio de Janeiro, Brazil
- …