105 research outputs found
MEASUREMENT OF VOCs USING OPEN-PATH MID-INFRARED DUAL-COMB SPECTROSCOPY
Dual frequency comb spectroscopy (DCS) is a rapidly evolving technique that provides a high-resolution, broadband spectrometer with no instrument lineshape and near perfect frequency calibration\footnote{Coddington I, Newbury N, Swann W. Dual-comb spectroscopy. Optica. 2016 Apr 20;3(4):414.
}. These features make DCS well suited for accurate measurements of multiple species simultaneously. Because the frequency comb lasers can be well collimated, such a system can be used for long open-path measurements with path lengths ranging from hundreds of meters to several kilometers. Open-path measurements of atmospheric gas species over these path lengths are well suited to quantify emissions from sources like oil and gas, forest fires, and industry.
Previous demonstrations of open-path DCS have primarily been in the 1-2 m spectral region; however, in order to reach the sensitivity necessary to detect many atmospheric trace constituents, including volatile organic compounds, operation in the mid-infrared is required. Here, we show a mid-infrared open-path dual comb spectrometer operating in the 3-5 m spectral region. We have used this spectrometer to measure methane, ethane, propane, and butane isomers (arising primarily from oil and gas activity) across a 1-km-long path in Boulder, CO for 1 week with an ethane sensitivity of 0.1 ppb for a 2-minute time resolution. In addition, we show quantitative measurements of intentionally released acetone and isopropanol with a 1- sensitivity of 5.7 ppm · m and 2.4 ppm · m, respectively
A portable dual frequency comb spectrometer for atmospheric applications
Dual frequency comb (DFC) spectroscopy is a new technique that combines broad spectral bandwidth, high spectral resolution, rapid data acquisition, and high sensitivity. In addition, unlike standard Fourier-transform spectroscopy, it has an almost ideal instrument lineshape function, does not require recalibration, and has no moving parts. These features make DFC spectroscopy well suited for accurate measurements of multiple species simultaneously. Because the frequency comb lasers can be well collimated, such a system can be used for long open-path measurements with path lengths ranging from hundreds of meters to several kilometers\footnote{G. B. Rieker, F. R. Giorgetta, W. C. Swann, J. Kofler, A. M. Zolot, L. C. Sinclair, E. Baumann, C. Cromer, G. Petron, C. Sweeney, P. P. Tans, I. Coddington, and N. R. Newbury, Frequency-comb-based remote sensing of greenhouse gases over kilometer air paths, Optica, 1(5), 290-298 (2014).}. This length scale bridges the gap between point measurements and satellite-based measurements and is ideal for providing information about local sources and quantifying emissions.
Here we show a fully portable DFC spectrometer operating over a wide spectral region in the near-infrared (about 1.5-2.1 m or 6670-4750 cm sampled at 0.0067 cm) and across several different open-air paths up to a path length of 11.8 km. The current spectrometer fits in about a 500 L volume and has low power consumption. It provides simultaneous measurements of CO, CH, and water isotopes with a time resolution of seconds to minutes. This system has several potential applications for atmospheric measurements including continuous monitoring city-scale emissions and localizing methane leaks from oil and gas wells
Precision Spectroscopy of Polarized Molecules in an Ion Trap
Polar molecules are desirable systems for quantum simulations and cold
chemistry. Molecular ions are easily trapped, but a bias electric field applied
to polarize them tends to accelerate them out of the trap. We present a general
solution to this issue by rotating the bias field slowly enough for the
molecular polarization axis to follow but rapidly enough for the ions to stay
trapped. We demonstrate Ramsey spectroscopy between Stark-Zeeman sublevels in
180Hf19F+ with a coherence time of 100 ms. Frequency shifts arising from
well-controlled topological (Berry) phases are used to determine magnetic
g-factors. The rotating-bias-field technique may enable using trapped polar
molecules for precision measurement and quantum information science, including
the search for an electron electric dipole moment.Comment: Accepted to Scienc
Mid-Infrared Time-Resolved Frequency Comb Spectroscopy of Transient Free Radicals
We demonstrate time-resolved frequency comb spectroscopy (TRFCS), a new broadband absorption spectroscopy technique for the study of trace free radicals on the microsecond timescale. We apply TRFCS to study the time-resolved, mid-infrared absorption of the deuterated hydroxyformyl radical trans-DOCO, an important short-lived intermediate along the OD + CO reaction path. Directly after photolysis of the chemical precursor acrylic acid-d_1, we measure absolute trans-DOCO product concentrations with a sensitivity of 5 × 10^(10) cm^(–3) and observe its subsequent loss with a time resolution of 25 μs. The multiplexed nature of TRFCS allows us to detect simultaneously the time-dependent concentration of several other photoproducts and thus unravel primary and secondary chemical reaction pathways
Social considerations for the cultivation of industrial crops on marginal agricultural land as feedstock for bioeconomy
Marginal agricultural land (MAL) has received much attention in research and policy formation as a potential resource for cultivating biomass for energy and biobased products. However, it is still unclear whether biomass from MAL meets the requirements of social sustainability. This study develops a conceptual linkage between value-chain analysis and social life-cycle analysis (S-LCA), and assesses both positive impacts (handprints) and negative impacts (footprints). A participatory approach including interviews and surveys was used to understand views and perceptions of the relevant stakeholders. A systemic strategy was applied to analyze value-chain activities, understand challenges, and identify competitive advantages and disadvantages. For S-LCA, the variety of impacts and indicators was met through a literature review and a consistent scoring system. The cultivation of perennial crops on MAL tends to cause skepticism among stakeholders, who are concerned about long-term commitment and biodiversity risks. Annual crops, on the other hand, are perceived by all stakeholder categories as very promising opportunities across all impact categories and indicators. They can facilitate income diversification and offer smart sustainable cropping options through crop rotation, agroforestry, etc. Most of the technological pathways examined are highly innovative, have a low technological readiness level, and are still at the early market development stage. As such they are ranked by stakeholders as medium opportunities for short-term implementation. In contrast, pyrolysis to industrial heat, ethanol from switchgrass, insulation material from hemp, and biogas/biomethane from sorghum are considered opportunities with good chances of being implemented in the short term. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons, Ltd
Gas-phase broadband spectroscopy using active sources: progress, status, and applications
Broadband spectroscopy is an invaluable tool for measuring multiple gas-phase species simultaneously. In this work we review basic techniques, implementations, and current applications for broadband spectroscopy. We discuss components of broadband spectroscopy including light sources, absorption cells, and detection methods and then discuss specific combinations of these components in commonly used techniques. We finish this review by discussing potential future advances in techniques and applications of broadband spectroscopy
Phase-stabilized, 1.5-W frequency comb at 2.8 to 4.8 micron
We present a high-power optical parametric oscillator-based frequency comb in
the mid-infrared wavelength region using periodically poled lithium niobate.
The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser
centered at 1.07 um and is singly resonant for the signal. The idler (signal)
wavelength can be continuously tuned from 2.8 to 4.8 um (1.76 to 1.37 um) with
a simultaneous bandwidth as high as 0.3 um and a maximum average idler output
power of 1.50 W. We also demonstrate the performance of the stabilized comb by
recording the heterodyne beat with a narrow-linewidth diode laser. This OPO is
an ideal source for frequency comb spectroscopy in the mid-IR.Comment: 4 figure
- …