Hydrogen slush density reference system

A hydrogen slush density reference system was designed for calibration of field-type instruments and/or transfer standards. The device is based on the buoyancy principle of Archimedes. The solids are weighed in a low-mass container so arranged that solids and container are buoyed by triple-point liquid hydrogen during the weighing process. Several types of hydrogen slush density transducers were developed and tested for possible use as transfer standards. The most successful transducers found were those which depend on change in dielectric constant, after which the Clausius-Mossotti function is used to relate dielectric constant and density

Fish Species of Greatest Conservation Need in Wadeable Iowa Streams: Current Status and Effectiveness of Aquatic Gap Program Distribution Models

Effective conservation of fish species of greatest conservation need (SGCN) requires an understanding of species– habitat relationships and distributional trends. Thus, modeling the distribution of fish species across large spatial scales may be a valuable tool for conservation planning. Our goals were to evaluate the status of 10 fish SGCN in wadeable Iowa streams and to test the effectiveness of IowaAquatic Gap Analysis Project (IAGAP) species distribution models. We sampled fish assemblages from 86 wadeable stream segments in the Mississippi River drainage of Iowa during 2009 and 2010 to provide contemporary, independent fish species presence–absence data. The frequencies of occurrence in stream segments where species were historically documented varied from 0.0% for redfin shiner Lythrurus umbratilis to 100.0% for American brook lamprey Lampetra appendix, with a mean of 53.0%, suggesting that the status of Iowa fish SGCN is highly variable. Cohen’s kappa values and other model performance measures were calculated by comparing field-collected presence–absence data with IAGAP model–predicted presences and absences for 12 fish SGCN. Kappa values varied from 0.00 to 0.50, with a mean of 0.15. The models only predicted the occurrences of banded darter Etheostoma zonale, southern redbelly dace Phoxinus erythrogaster, and longnose dace Rhinichthys cataractae more accurately than would be expected by chance. Overall, the accuracy of the twelve models was low, with a mean correct classification rate of 58.3%. Poor model performance probably reflects the difficulties associated with modeling the distribution of rare species and the inability of the large-scale habitat variables used in IAGAP models to explain the variation in fish species occurrences. Our results highlight the importance of quantifying the confidence in species distribution model predictions with an independent data set and the need for long-term monitoring to better understand the distributional trends and habitat associations of fish SGCN

Evaluation of Ralgro® on pasture and subsequent feedlot performance and carcass merit of mexican crossbred steers

A pasture/feedlot field study was conducted to evaluate the effects of a single Ralgro® implant during the stocker phase on steer grazing performance and subsequent feedlot performance and carcass merit. A total of 2,764 steers of Mexican origin averaging 449 lb were assembled in Texas and shipped to Kansas, where they grazed on three intensively-early-stocked Flint Hills pastures. At initial processing, the steers were individually weighed and randomly assigned to either a non-implanted control group or a Ralgro implant group. Ralgro steers gained more (23 lb; P<0.01) than controls during the 82- to 93-day grazing phase. Following the grazing phase, all steers were shipped to a commercial feedlot in southwestern Kansas where steers from each pasture were individually weighed and given a single Component E-S® implant. Immediately after processing, steers from each pasture were sorted into either a light- or heavy-weight pen, regardless of pasture implant treatment, resulting in six feedlot pens. Days on feed ranged from 127 to 197. Control steers gained faster (P<0.01) during the feedlot phase; however, Ralgro steers had higher cumulative weight gains across the combined pasture and feedlot phases (P<0.01) and averaged three fewer days on feed (P<0.05). There were no significant differences for marbling, fat thickness, ribeye area, KPH fat, or yield grade. Ralgro steers had lower (P<0.05) quality grades because of a higher incidence (P<0.001) of steers with B and C carcass maturities

Habitat Associations of Fish Species of Greatest Conservation Need at Multiple Spatial Scales in Wadeable Iowa Streams

Fish and habitat data were collected from 84 wadeable stream reaches in the Mississippi River drainage of Iowa to predict the occurrences of seven fish species of greatest conservation need and to identify the relative importance of habitat variables measured at small (e.g., depth, velocity, and substrate) and large (e.g., stream order, elevation, and gradient) scales in terms of their influence on species occurrences. Multiple logistic regression analysis was used to predict fish species occurrences, starting with all possible combinations of variables (5 large-scale variables, 13 small-scale variables, and all 18 variables) but limiting the final models to a maximum of five variables. Akaike’s information criterion was used to rank candidate models, weight model parameters, and calculate model-averaged predictions. On average, the correct classification rate (CCR = 80%) and Cohen’s kappa (κ = 0.59) were greatest for multiple-scale models (i.e., those including both large-scale and small-scale variables), intermediate for small-scale models (CCR = 75%; κ = 0.49), and lowest for large-scale models (CCR = 73%; κ = 0.44). The occurrence of each species was associated with a unique combination of large-scale and small-scale variables. Our results support the necessity of understanding factors that constrain the distribution of fishes across spatial scales to ensure that management decisions and actions occur at the appropriate scale

The Effect of Tear Supplementation on Ocular Surface Sensations during the Interblink Interval in Patients with Dry Eye.

PURPOSE: To investigate the characteristics of ocular surface sensations and corneal sensitivity during the interblink interval before and after tear supplementation in dry eye patients. METHODS: Twenty subjects (41.88+/-14.37 years) with dry eye symptoms were included in the dry eye group. Fourteen subjects (39.13+/-11.27 years) without any clinical signs and/or symptoms of dry eye were included in the control group. Tear film dynamics was assessed by non-invasive tear film breakup time (NI-BUT) in parallel with continuous recordings of ocular sensations during forced blinking. Corneal sensitivity to selective stimulation of corneal mechano-, cold and chemical receptors was assessed using a gas esthesiometer. All the measurements were made before and 5 min after saline and hydroxypropyl-guar (HP-guar) drops. RESULTS: In dry eye patients the intensity of irritation increased rapidly after the last blink during forced blinking, while in controls there was no alteration in the intensity during the first 10 sec followed by an exponential increase. Irritation scores were significantly higher in dry eye patients throughout the entire interblink interval compared to controls (p0.05). CONCLUSION: Ocular surface irritation responses due to tear film drying are considerably increased in dry eye patients compared to normal subjects. Although tear supplementation improves the protective tear film layer, and thus reduce unpleasant sensory responses, the rapid rise in discomfort is still maintained and might be responsible for the remaining complaints of dry eye patients despite the treatment

Ultrafast-ultrafine probing of high-speed electrical waveforms using a scanning force microscope with photoconductive gating

Picosecond photoconductivity in low-temperature-grown GaAs (LT GaAs) has been used to provide temporal resolution both in rigid probes and in scanning force microscope probes. This article reviews the fabrication and use of such probes. 2.5 ps temporal resolution and few microvolts sensitivity are obtained at arbitrary points on circuits with a spatial definition of 100 nm. Rigid probes are tested in application to analogue and digital circuits. As an alternative to electron beam testing, scanning force probes are applied to in situ imaging and waveform measurement. Finally, the use of time-resolved waveform analysis with scanning-force microscopy probes with semiconductor laser sources is demonstrated.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/43337/1/11082_2004_Article_BF00820152.pd