4,578 research outputs found
A new class of random processes with application to helicopter noise
The concept of dividing random processes into classes (e.g., stationary, locally stationary, periodically correlated, and harmonizable) has long been employed. A new class of random processes is introduced which includes many of these processes as well as other interesting processes which fall into none of the above classes. Such random processes are denoted as linearly correlated. This class is shown to include the familiar stationary and periodically correlated processes as well as many other, both harmonizable and non-harmonizable, nonstationary processes. When a process is linearly correlated for all t and harmonizable, its two-dimensional power spectral density S(x)(omega 1, omega 2) is shown to take a particularly simple form, being non-zero only on lines such that omega 1 to omega 2 = + or - r(k) where the r(k's) are (not necessarily equally spaced) roots of a characteristic function. The relationship of such processes to the class of stationary processes is examined. In addition, the application of such processes in the analysis of typical helicopter noise signals is described
On a class of nonstationary stochastic processes
A new class of nonstationary stochastic processes is introduced and some of the essential properties of its members are investigated. This class is richer than the class of stationary processes and has the potential of modeling some nonstationary time series. The relation between these newly defined processes with other important classes of nonstationary processes is investigated. Several examples of linearly correlated processes which are not stationary, periodically correlated, or harmonizable are given
Recommended from our members
Graph complexity analysis identifies an ETV5 tumor-specific network in human and murine low-grade glioma
Conventional differential expression analyses have been successfully employed to identify genes whose levels change across experimental conditions. One limitation of this approach is the inability to discover central regulators that control gene expression networks. In addition, while methods for identifying central nodes in a network are widely implemented, the bioinformatics validation process and the theoretical error estimates that reflect the uncertainty in each step of the analysis are rarely considered. Using the betweenness centrality measure, we identified Etv5 as a potential tissue-level regulator in murine neurofibromatosis type 1 (Nf1) low-grade brain tumors (optic gliomas). As such, the expression of Etv5 and Etv5 target genes were increased in multiple independently-generated mouse optic glioma models relative to non-neoplastic (normal healthy) optic nerves, as well as in the cognate human tumors (pilocytic astrocytoma) relative to normal human brain. Importantly, differential Etv5 and Etv5 network expression was not directly the result of Nf1 gene dysfunction in specific cell types, but rather reflects a property of the tumor as an aggregate tissue. Moreover, this differential Etv5 expression was independently validated at the RNA and protein levels. Taken together, the combined use of network analysis, differential RNA expression findings, and experimental validation highlights the potential of the computational network approach to provide new insights into tumor biology
Using Innovative Technologies for Manufacturing Rocket Engine Hardware
Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As the United States enters into the next space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, rapid manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on NASA s Space Launch System (SLS) upper stage engine, J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator (GG) discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using a workhorse gas generator (WHGG) test fixture at MSFC's East Test Area, the duct was subjected to extreme J-2X hot gas environments during 7 tests for a total of 537 seconds of hot-fire time. The duct underwent extensive post-test evaluation and showed no signs of degradation. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended
Synchronization of Sound Sources
Sound generation and -interaction is highly complex, nonlinear and
self-organized. Already 150 years ago Lord Rayleigh raised the following
problem: Two nearby organ pipes of different fundamental frequencies sound
together almost inaudibly with identical pitch. This effect is now understood
qualitatively by modern synchronization theory (M. Abel et al., J. Acoust. Soc.
Am., 119(4), 2006). For a detailed, quantitative investigation, we substituted
one pipe by an electric speaker. We observe that even minute driving signals
force the pipe to synchronization, thus yielding three decades of
synchronization -- the largest range ever measured to our knowledge.
Furthermore, a mutual silencing of the pipe is found, which can be explained by
self-organized oscillations, of use for novel methods of noise abatement.
Finally, we develop a specific nonlinear reconstruction method which yields a
perfect quantitative match of experiment and theory.Comment: 5 pages, 4 figure
Estrogen effects on triglyceride metabolism in analbuminemic rats
Estrogen effects on triglyceride metabolism in analbuminemic rats.BackgroundTriglyceride (TG) levels are normally lower in female rats, while the opposite is the case in the Nagase analbuminemic rats (NAR). Increased TG levels in normal males are caused by a testosterone-mediated decrease in postheparin (PH) lipoprotein lipase (LpL). Castration of males reduces TG, while castration of females is without effect. TG levels are reduced by castration of the female NAR, suggesting that estrogen rather than testosterone causes hypertriglyceridemia in this strain. The mechanism for this increase is unknown.MethodsWe measured secretion of very-low density lipoprotein (VLDL) TG using Triton WR 1339 clearance as the disappearance from blood of 3H-trioleate and 14C-cholesterol–labeled chylomicrons (CM), and the activity of the PH lipases: LpL and hepatic lipase (HL). All were determined in Sprague-Dawley (SD) and NAR female, male, and ovariectomized (OVX) rats.ResultsTG levels were significantly greater in female NAR in comparison to all other groups. Ovariectomy of NAR significantly ameliorated hypertriglyceridemia. VLDL TG secretion was significantly greater in intact female NAR compared with all other groups. There were no other differences in VLDL TG secretion among the other groups. The clearance of CM was greatest in female SD rats, and OVX had no effect. NAR cleared CM less well than did SD rats (P < 0.001), but among NAR, clearance was greatest in OVX NAR and male NAR (P < 0.002). Both PH LpL activity and HL activity were lowest in female NAR (P < 0.05). Ovariectomy partially corrected the defect in HL (P < 0.05).ConclusionTG levels in female NAR are in part a result of increased VLDL-TG secretion, an effect mediated by estrogen. The presence of an estrogen-mediated catabolic defect that was alleviated by OVX was also observed. This catabolic defect is likely a result of an estrogen-mediated decrease both in LpL and HL expressed only in the presence of analbuminemia
Two superluminous supernovae from the early universe discovered by the Supernova Legacy Survey
We present spectra and lightcurves of SNLS 06D4eu and SNLS 07D2bv, two
hydrogen-free superluminous supernovae discovered by the Supernova Legacy
Survey. At z = 1.588, SNLS 06D4eu is the highest redshift superluminous SN with
a spectrum, at M_U = -22.7 is one of the most luminous SNe ever observed, and
gives a rare glimpse into the restframe ultraviolet where these supernovae put
out their peak energy. SNLS 07D2bv does not have a host galaxy redshift, but
based on the supernova spectrum, we estimate it to be at z ~ 1.5. Both
supernovae have similar observer-frame griz lightcurves, which map to restframe
lightcurves in the U-band and UV, rising in ~ 20 restframe days or longer, and
declining over a similar timescale. The lightcurves peak in the shortest
wavelengths first, consistent with an expanding blackbody starting near 15,000
K and steadily declining in temperature. We compare the spectra to theoretical
models, and identify lines of C II, C III, Fe III, and Mg II in the spectrum of
SNLS 06D4eu and SCP 06F6, and find that they are consistent with an expanding
explosion of only a few solar masses of carbon, oxygen, and other trace metals.
Thus the progenitors appear to be related to those suspected for SNe Ic. A high
kinetic energy, 10^52 ergs, is also favored. Normal mechanisms of powering
core- collapse or thermonuclear supernovae do not seem to work for these
supernovae. We consider models powered by 56Ni decay and interaction with
circumstellar material, but find that the creation and spin-down of a magnetar
with a period of 2ms, magnetic field of 2 x 10^14 Gauss, and a 3 solar mass
progenitor provides the best fit to the data.Comment: ApJ, accepted, 43 pages, 15 figure
- …