Persistent Localized Broadcasting in VANETs

We present a communication protocol, called LINGER, for persistent dissemination of delay-tolerant information to vehicular users, within a geographical area of interest. The goal of LINGER is to dispatch and confine information in localized areas of a mobile network with minimal protocol overhead and without requiring knowledge of the vehicles' routes or destinations. LINGER does not require roadside infrastructure support: it selects mobile nodes in a distributed, cooperative way and lets them act as "information bearers", providing uninterrupted information availability within a desired region. We analyze the performance of our dissemination mechanism through extensive simulations, in complex vehicular scenarios with realistic node mobility. The results demonstrate that LINGER represents a viable, appealing alternative to infrastructure-based solutions, as it can successfully drive the information toward a region of interest from a far away source and keep it local with negligible overhead. We show the effectiveness of such an approach in the support of localized broadcasting, in terms of both percentage of informed vehicles and information delivery delay, and we compare its performance to that of a dedicated, state-of-the-art protoco

Los edificios de paneles más altos de España

RESUMEN Este artículo describe el proceso constructivo de un conjunto de 484 viviendas realizadas con paneles prefabricados portantes de hormigón. Dicho conjunto edi¿catorio, de 20 plantas de altura, se compone de diversos bloques que integran además, locales comerciales, o¿cinas, trasteros, 4 plantas de garaje e instalaciones comunes. El principal interés de este edi¿cio consiste en haber alcanzado veinte plantas sobre rasante y 4 más de sótano con el sistema constructivo de paneles prefabricados de hormigón INDAGSA; el cual dispone de un Documento de Idoneidad Técnica emitido por el IETcc, con el número DIT 452. Las obras de INDAGSA son conocidas por ser precisas, ordenadas y limpias; debido a estas características, se pudieron establecer visitas no sólo para doctorandos de la ETSAM, sino para estudiantes de la Cátedra de sistemas industrializados y prefabricados. A través de la descripción del sistema constructivo, podremos mostrar una perspectiva global de las posibilidades de los sistemas de paneles prefabricados de hormigón y las capacidades evolutivas de éstos

A New Approach for Studying Semithin Sections of Human Pathological Material: Intermicroscopic Correlation Between Light Microscopy and Scanning Electron Microscopy

In order to obtain useful and complete information on the study of pathological material, we observed by scanning electron microscopy (SEM) the same semithin sections observed by light microscopy (LM). For this purpose, the specimen must have, at the same time, chromatic and electron dense characteristics. We thus developed different specimen preparation methods, subjecting the semithin sections to specific polychromatic staining with high atomic number (Z) elements, to monochromatic staining followed by routine contrasting with uranyl acetate and lead citrate, and to specific cytochemical and immunocytochemical procedures. The specimens were examined in sequence by LM, by SEM equipped with secondary electron, backscattered electron, transmitted electron detectors and by scanning transmission electron microscopy (S(T)EM)

Generación morfológica digital en arquitectura: diseño paramétrico y algoritmos evolucionistas

This paper presents results obtained from a research project development carried out in the Design Systems Laboratory, FAU-UNT. This research was oriented to establish techniques and procedures for the production of potentially architectural 3D objects, during conceptual stage. Objects with different scales, feasible to accept architecture, were studied. For their generation, visual programming environments oriented to parametric design, were applied. Parameters, as genomes, were put to work in an "evolutionary algorithm" environment with the purpose to obtain architectural design applications, emulating biological evolutions. The main procedure consists in testing quantitative and qualitative parameters that define each object, until an expected architectural result is reached. Some results obtained are shown.Este trabajo presenta algunos resultados finales obtenidos a partir del desarrollo de un proyecto de investigación llevado a cabo en el Laboratorio de Sistemas de Diseño de la FAU-UNT. La investigación estuvo orientada a establecer técnicas y procedimientos para la producción de objetos 3D potencialmente arquitectónicos durante la etapa de “Concepción Arquitectónica”. En esta presentación se consideran objetos, de diferentes escalas, factibles de aceptar arquitectura y que fueron estudiados y generados en entornos de programación visual orientado al diseño paramétrico, un nuevo paradigma de diseño donde se establecen relaciones entre los partes que definen a un objeto como un todo. Los parámetros de los objetos en estudio fueron puestos a funcionar, a modo de genomas, en un entorno generativo del tipo “algoritmo evolucionista”, rama de la inteligencia artificial que usa métodos de optimización y búsqueda de soluciones basados en los postulados de la evolución biológica aplicado al diseño. A partir de los parámetros que definen a cada objeto, se procede a su evolución hasta alcanzar el propósito buscado. Los resultados obtenidos permitieron evaluar su utilidad y aplicación en entornos de diseños digitales en etapas tempranas de la concepción arquitectónica. La generación automática, aleatoria y dirigida permitió incentivar la creatividad y evaluación de casos impensados. Se muestran algunos resultados obtenidos.Facultad de Arquitectura y Urbanism

Modulation of Human Immunodeficiency Virus 1 Replication by Interferon Regulatory Factors

Transcription of the human immunodeficiency virus (HIV)-1 is controlled by the cooperation of virally encoded and host regulatory proteins. The Tat protein is essential for viral replication, however, expression of Tat after virus entry requires HIV-1 promoter activation. A sequence in the 5′ HIV-1 LTR, containing a binding site for transcription factors of the interferon regulatory factors (IRF) family has been suggested to be critical for HIV-1 transcription and replication. Here we show that IRF-1 activates HIV-1 LTR transcription in a dose-dependent fashion and in the absence of Tat. This has biological significance since IRF-1 is produced early upon virus entry, both in cell lines and in primary CD4+ T cells, and before expression of Tat. IRF-1 also cooperates with Tat in amplifying virus gene transcription and replication. This cooperation depends upon a physical interaction that is blocked by overexpression of IRF-8, the natural repressor of IRF-1, and, in turn is released by overexpression of IRF-1. These data suggest a key role of IRF-1 in the early phase of viral replication and/or during viral reactivation from latency, when viral transactivators are absent or present at very low levels, and suggest that the interplay between IRF-1 and IRF-8 may play a key role in virus latency

Molecular Analyses of Circadian Gene Variants Reveal Sex-Dependent Links Between Depression and Clocks

An extensive literature links circadian irregularities and/or sleep abnormalities to mood disorders. Despite the strong genetic component underlying many mood disorders, however, previous genetic associations between circadian clock gene variants and major depressive disorder (MDD) have been weak. We applied a combined molecular/functional and genetic association approach to circadian gene polymorphisms in sex-stratified populations of control subjects and case subjects suffering from MDD. This approach identified significant sex-dependent associations of common variants of the circadian clock genes hClock, hPer3 and hNpas2 with major depression and demonstrated functional effects of these polymorphisms on the expression or activity of the hCLOCK and hPER3 proteins, respectively. In addition, hCLOCK expression is affected by glucocorticoids, consistent with the sex-dependency of the genetic associations and the modulation of glucocorticoid-mediated stress response, providing a mechanism by which the circadian clock controls outputs that may affect psychiatric disorders. We conclude that genetic polymorphisms in circadian genes (especially hClock and hPer3, where functional assays could be tested) influence risk of developing depression in a sex- and stress-dependent manner. These studies support a genetic connection between circadian disruption and mood disorders, and confirm a key connection between circadian gene variation and major depression

Deep hypothermia prevents striatal alterations produced by perinatal asphyxia: Implications for the prevention of dyskinesia and psychosis

GABAergic medium spiny neurons are the main neuronal population in the striatum. Calbindin is preferentially expressed in medium spiny neurons involved in the indirect pathway. The aim of the present work is to analyze the effect of perinatal asphyxia on different subpopulations of GABAergic neurons in the striatum and to assess the outcome of deep therapeutic hypothermia. The uterus of pregnant rats was removed by cesarean section and the fetuses were exposed to hypoxia by immersion in water (19 min) at 37°C (perinatal asphyxia). The hypothermic group was exposed to 10°C during 30 min after perinatal asphyxia. The rats were euthanized at the age of one month (adolescent/adult rats), their brains were dissected out and coronal sections were immunolabeled for calbindin, calretinin, NeuN, and reelin. Reelin+ cells showed no staining in the striatum besides subventricular zone. The perinatal asphyxia (PA) group showed a significant decrease in calbindin neurons and a paradoxical increase in neurons estimated by NeuN staining. Moreover, calretinin+ cells, a specific subpopulation of GABAergic neurons, showed an increase caused by PA. Deep hypothermia reversed most of these alterations probably by protecting calbindin neurons. Similarly, there was a reduction of the diameter of the anterior commissure produced by the asphyxia that was prevented by hypothermic treatment.Fil: Vazquez, Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Biología Celular y Neurociencia "Prof. Eduardo de Robertis". Universidad de Buenos Aires. Facultad de Medicina. Instituto de Biología Celular y Neurociencia; ArgentinaFil: Acuña, Andres. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Biología Celular y Neurociencia "Prof. Eduardo de Robertis". Universidad de Buenos Aires. Facultad de Medicina. Instituto de Biología Celular y Neurociencia; ArgentinaFil: Soliño, Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Biología Celular y Neurociencia "Prof. Eduardo de Robertis". Universidad de Buenos Aires. Facultad de Medicina. Instituto de Biología Celular y Neurociencia; ArgentinaFil: López Costa, Juan José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Biología Celular y Neurociencia "Prof. Eduardo de Robertis". Universidad de Buenos Aires. Facultad de Medicina. Instituto de Biología Celular y Neurociencia; ArgentinaFil: Kargieman, Lucila. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Fisiología, Biología Molecular y Neurociencias. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Fisiología, Biología Molecular y Neurociencias; ArgentinaFil: Loidl, Cesar Fabian. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Biología Celular y Neurociencia "Prof. Eduardo de Robertis". Universidad de Buenos Aires. Facultad de Medicina. Instituto de Biología Celular y Neurociencia; Argentin

Extreme genetic fragility of the HIV-1 capsid

Genetic robustness, or fragility, is defined as the ability, or lack thereof, of a biological entity to maintain function in the face of mutations. Viruses that replicate via RNA intermediates exhibit high mutation rates, and robustness should be particularly advantageous to them. The capsid (CA) domain of the HIV-1 Gag protein is under strong pressure to conserve functional roles in viral assembly, maturation, uncoating, and nuclear import. However, CA is also under strong immunological pressure to diversify. Therefore, it would be particularly advantageous for CA to evolve genetic robustness. To measure the genetic robustness of HIV-1 CA, we generated a library of single amino acid substitution mutants, encompassing almost half the residues in CA. Strikingly, we found HIV-1 CA to be the most genetically fragile protein that has been analyzed using such an approach, with 70% of mutations yielding replication-defective viruses. Although CA participates in several steps in HIV-1 replication, analysis of conditionally (temperature sensitive) and constitutively non-viable mutants revealed that the biological basis for its genetic fragility was primarily the need to coordinate the accurate and efficient assembly of mature virions. All mutations that exist in naturally occurring HIV-1 subtype B populations at a frequency >3%, and were also present in the mutant library, had fitness levels that were >40% of WT. However, a substantial fraction of mutations with high fitness did not occur in natural populations, suggesting another form of selection pressure limiting variation in vivo. Additionally, known protective CTL epitopes occurred preferentially in domains of the HIV-1 CA that were even more genetically fragile than HIV-1 CA as a whole. The extreme genetic fragility of HIV-1 CA may be one reason why cell-mediated immune responses to Gag correlate with better prognosis in HIV-1 infection, and suggests that CA is a good target for therapy and vaccination strategies

ERα-LBD, an isoform of estrogen receptor alpha, promotes breast cancer proliferation and endocrine resistance

Estrogen receptor alpha (ER alpha) drives mammary gland development and breast cancer (BC) growth through an evolutionarily conserved linkage of DNA binding and hormone activation functions. Therapeutic targeting of the hormone binding pocket is a widely utilized and successful strategy for breast cancer prevention and treatment. However, resistance to this endocrine therapy is frequently encountered and may occur through bypass or reactivation of ER-regulated transcriptional programs. We now identify the induction of an ER alpha isoform, ER alpha-LBD, that is encoded by an alternative ESR1 transcript and lacks the activation function and DNA binding domains. Despite lacking the transcriptional activity, ER alpha-LBD is found to promote breast cancer growth and resistance to the ER alpha antagonist fulvestrant. ER alpha-LBD is predominantly localized to the cytoplasm and mitochondria of BC cells and leads to enhanced glycolysis, respiration and stem-like features. Intriguingly, ER alpha-LBD expression and function does not appear to be restricted to cancers that express full length ER alpha but also promotes growth of triple-negative breast cancers and ER alpha-LBD transcript (ESR1-LBD) is also present in BC samples from both ER alpha(+) and ER alpha(-) human tumors. These findings point to ER alpha-LBD as a potential mediator of breast cancer progression and therapy resistance

One year of surgical mask testing at the University of Bologna labs:Lessons learned from data analysis

The outbreak of SARS-CoV-2 pandemic highlighted the worldwide lack of surgical masks and personal protective equipment, which represent the main defense available against respiratory diseases as COVID-19. At the time, masks shortage was dramatic in Italy, the first European country seriously hit by the pandemic: aiming to address the emergency and to support the Italian industrial reconversion to the production of surgical masks, a multidisciplinary team of the University of Bologna organized a laboratory to test surgical masks according to European regulations. The group, driven by the expertise of chemical engineers, microbiologists, and occupational physicians, set-up the test lines to perform all the functional tests required. The laboratory started its activity on late March 2020, and as of the end of December of the same year 435 surgical mask prototypes were tested, with only 42 masks compliant to the European standard. From the analysis of the materials used, as well as of the production methods, it was found that a compliant surgical mask is most likely composed of three layers, a central meltblown filtration layer and two external spunbond comfort layers. An increase in the material thickness (grammage), or in the number of layers, does not improve the filtration efficiency, but leads to poor breathability, indicating that filtration depends not only on pure size exclusion, but other mechanisms are taking place (driven by electrostatic charge). The study critically reviewed the European standard procedures, identifying the weak aspects; among the others, the control of aerosol droplet size during the bacterial filtration test results to be crucial, since it can change the classification of a mask when its performance lies near to the limiting values of 95 or 98%