177 research outputs found
Comparison of four mobility particle sizers with different time resolution for stationary exposure measurements
Interaction of rat alveolar macrophages with dental composite dust
Background: Dental composites have become the standard filling material to restore teeth, but during the placement of these restorations, high amounts of respirable composite dust (<5 mu m) including many nano-sized particles may be released in the breathing zone of the patient and dental operator. Here we tested the respirable fraction of several composite particles for their cytotoxic effect using an alveolar macrophage model system. Methods: Composite dust was generated following a clinical protocol, and the dust particles were collected under sterile circumstances. Dust was dispersed in fluid, and 5-mu m-filtered to enrich the respirable fractions. Quartz DQ12 and corundum were used as positive and negative control, respectively. Four concentrations (22.5 mu g/ml, 45 mu g/ml, 90 mu g/ml and 180 mu g/ml) were applied to NR8383 alveolar macrophages. Light and electron microscopy were used for subcellular localization of particles. Culture supernatants were tested for release of lactate dehydrogenase, glucuronidase, TNF-alpha, and H2O2. Results: Characterization of the suspended particles revealed numerous nano-sized particles but also many high volume particles, most of which could be removed by filtering. Even at the highest concentration (180 mu g/ml), cells completely cleared settled particles from the bottom of the culture vessel. Accordingly, a mixture of nano- and micron-scaled particles was observed inside cells where they were confined to phagolysosomes. The filtered particle fractions elicited largely uniform dose-dependent responses, which were elevated compared to the control only at the highest concentration, which equaled a mean cellular dose of 120 pg/cell. A low inflammatory potential was identified due to dose-dependent release of H2O2 and TNF-alpha. However, compared to the positive control, the released levels of H2O2 and TNF-alpha were still moderate, but their release profiles depended on the type of composite. Conclusions: Alveolar macrophages are able to phagocytize respirable composite dust particle inclusive nanoparticles. Since NR8383 cells tolerate a comparatively high cell burden (60 pg/cell) of each of the five materials with minimal signs of cytotoxicity or inflammation, the toxic potential of respirable composite dust seems to be low. These results are reassuring for dental personnel, but more research is needed to characterize the actual exposure and uptake especially of the pure nano fraction
Characteristics of Welding Fume Aerosol Investigated in Three Swedish Workshops
Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks
Interaction of rat alveolar macrophages with dental composite dust
Background: Dental composites have become the standard filling material to restore teeth, but during the placement of these restorations, high amounts of respirable composite dust (<5 mu m) including many nano-sized particles may be released in the breathing zone of the patient and dental operator. Here we tested the respirable fraction of several composite particles for their cytotoxic effect using an alveolar macrophage model system. Methods: Composite dust was generated following a clinical protocol, and the dust particles were collected under sterile circumstances. Dust was dispersed in fluid, and 5-mu m-filtered to enrich the respirable fractions. Quartz DQ12 and corundum were used as positive and negative control, respectively. Four concentrations (22.5 mu g/ml, 45 mu g/ml, 90 mu g/ml and 180 mu g/ml) were applied to NR8383 alveolar macrophages. Light and electron microscopy were used for subcellular localization of particles. Culture supernatants were tested for release of lactate dehydrogenase, glucuronidase, TNF-alpha, and H2O2. Results: Characterization of the suspended particles revealed numerous nano-sized particles but also many high volume particles, most of which could be removed by filtering. Even at the highest concentration (180 mu g/ml), cells completely cleared settled particles from the bottom of the culture vessel. Accordingly, a mixture of nano- and micron-scaled particles was observed inside cells where they were confined to phagolysosomes. The filtered particle fractions elicited largely uniform dose-dependent responses, which were elevated compared to the control only at the highest concentration, which equaled a mean cellular dose of 120 pg/cell. A low inflammatory potential was identified due to dose-dependent release of H2O2 and TNF-alpha. However, compared to the positive control, the released levels of H2O2 and TNF-alpha were still moderate, but their release profiles depended on the type of composite. Conclusions: Alveolar macrophages are able to phagocytize respirable composite dust particle inclusive nanoparticles. Since NR8383 cells tolerate a comparatively high cell burden (60 pg/cell) of each of the five materials with minimal signs of cytotoxicity or inflammation, the toxic potential of respirable composite dust seems to be low. These results are reassuring for dental personnel, but more research is needed to characterize the actual exposure and uptake especially of the pure nano fraction
Dataset of prostate MRI annotated for anatomical zones and cancer
In the present work, we present a publicly available, expert-segmented representative dataset of 158 3.0 Tesla biparametric MRIs [1]. There is an increasing number of studies investigating prostate and prostate carcinoma segmentation using deep learning (DL) with 3D architectures [2], [3], [4], [5], [6], [7]. The development of robust and data-driven DL models for prostate segmentation and assessment is currently limited by the availability of openly available expert-annotated datasets [8], [9], [10].
The dataset contains 3.0 Tesla MRI images of the prostate of patients with suspected prostate cancer. Patients over 50 years of age who had a 3.0 Tesla MRI scan of the prostate that met PI-RADS version 2.1 technical standards were included. All patients received a subsequent biopsy or surgery so that the MRI diagnosis could be verified/matched with the histopathologic diagnosis. For patients who had undergone multiple MRIs, the last MRI, which was less than six months before biopsy/surgery, was included. All patients were examined at a German university hospital (Charité Universitätsmedizin Berlin) between 02/2016 and 01/2020. All MRI were acquired with two 3.0 Tesla MRI scanners (Siemens VIDA and Skyra, Siemens Healthineers, Erlangen, Germany). Axial T2W sequences and axial diffusion-weighted sequences (DWI) with apparent diffusion coefficient maps (ADC) were included in the data set.
T2W sequences and ADC maps were annotated by two board-certified radiologists with 6 and 8 years of experience, respectively. For T2W sequences, the central gland (central zone and transitional zone) and peripheral zone were segmented. If areas of suspected prostate cancer (PIRADS score of ≥ 4) were identified on examination, they were segmented in both the T2W sequences and ADC maps.
Because restricted diffusion is best seen in DWI images with high b-values, only these images were selected and all images with low b-values were discarded. Data were then anonymized and converted to NIfTI (Neuroimaging Informatics Technology Initiative) format
Analysis of multivariate stochastic signals sampled by on-line particle analyzers: Application to the quantitative assessment of occupational exposure to NOAA in multisource industrial scenarios (MSIS)
In multisource industrial scenarios (MSIS) coexist NOAA generating activities with other productive sources of airborne particles, such as parallel processes of manufacturing or electrical and diesel machinery. A distinctive characteristic of MSIS is the spatially complex distribution of aerosol sources, as well as their potential differences in dynamics, due to the feasibility of multi-task configuration at a given time. Thus, the background signal is expected to challenge the aerosol analyzers at a probably wide range of concentrations and size distributions, depending of the multisource configuration at a given time. Monitoring and prediction by using statistical analysis of time series captured by on-line particle analyzersin industrial scenarios, have been proven to be feasible in predicting PNC evolution provided a given quality of net signals (difference between signal at source and background). However the analysis and modelling of non-consistent time series, influenced by low levels of SNR (Signal-Noise Ratio) could build a misleading basis for decision making. In this context, this work explores the use of stochastic models based on ARIMA methodology to monitor and predict exposure values (PNC). The study was carried out in a MSIS where an case study focused on the manufacture of perforated tablets of nano-TiO2 by cold pressing was performed.Research carried out by projects SCAFFOLD and EHS Advance were made possible thanks to
funding from European Commission through FP7 (GA 319092) and Basque Country Government
through ETORTEK Programme
Occupational exposure to nano-TiO2 in the life cycle steps of new depollutant mortars used in construction
The present work is focused on the measurement of workers exposure to nano-TiO2
in the life cycle steps of depollutant mortars. It has been done in the framework of the
SCAFFOLD project, which aims at the management of potential risks arising from the use of
manufactured nanomaterials in construction. Main findings can be summarized as follows: (1)
The occupational exposure to nano- TiO2 is below 0.3 mg/m3 for all measured scenarios. The
highest concentrations were measured during the cleaning task (in the nano- TiO2
manufacturing process) and during the application (spraying) of depollutant coatings on a wall.
(2) It was found a high release of particles above the background in several tasks as expected
due to the nature of the activities performed. The maximum concentration was measured
during drilling and during adding powder materials (mean total particle concentration up to
5.591E+04 particles/cm3 and 5.69E+04 particles/cm3). However, considering data on total
particle concentration released, no striking differences have been observed when tasks have
been performed using conventional materials in the sector (control) and when using materials
doped with nano-objects.European Commission's FP
Exploiting Pan Influenza A and Pan Influenza B Pseudotype Libraries for Efficient Vaccine Antigen Selection.
We developed an influenza hemagglutinin (HA) pseudotype library encompassing Influenza A subtypes HA1-18 and Influenza B subtypes (both lineages) to be employed in influenza pseudotype microneutralization (pMN) assays. The pMN is highly sensitive and specific for detecting virus-specific neutralizing antibodies against influenza viruses and can be used to assess antibody functionality in vitro. Here we show the production of these viral HA pseudotypes and their employment as substitutes for wildtype viruses in influenza neutralization assays. We demonstrate their utility in detecting serum responses to vaccination with the ability to evaluate cross-subtype neutralizing responses elicited by specific vaccinating antigens. Our findings may inform further preclinical studies involving immunization dosing regimens in mice and may help in the creation and selection of better antigens for vaccine design. These HA pseudotypes can be harnessed to meet strategic objectives that contribute to the strengthening of global influenza surveillance, expansion of seasonal influenza prevention and control policies, and strengthening pandemic preparedness and response
Targeting HIV-1 Env gp140 to LOX-1 Elicits Immune Responses in Rhesus Macaques.
Improved antigenicity against HIV-1 envelope (Env) protein is needed to elicit vaccine-induced protective immunity in humans. Here we describe the first tests in non-human primates (NHPs) of Env gp140 protein fused to a humanized anti-LOX-1 recombinant antibody for delivering Env directly to LOX-1-bearing antigen presenting cells, especially dendritic cells (DC). LOX-1, or 1ectin-like oxidized low-density lipoprotein (LDL) receptor-1, is expressed on various antigen presenting cells and endothelial cells, and is involved in promoting humoral immune responses. The anti-LOX-1 Env gp140 fusion protein was tested for priming immune responses and boosting responses in animals primed with replication competent NYVAC-KC Env gp140 vaccinia virus. Anti-LOX-1 Env gp140 vaccination elicited robust cellular and humoral responses when used for either priming or boosting immunity. Co-administration with Poly ICLC, a TLR3 agonist, was superior to GLA, a TLR4 agonist. Both CD4+ and CD8+ Env-specific T cell responses were elicited by anti-LOX-1 Env gp140, but in particular the CD4+ T cells were multifunctional and directed to multiple epitopes. Serum IgG and IgA antibody responses induced by anti-LOX-1 Env gp140 against various gp140 domains were cross-reactive across HIV-1 clades; however, the sera neutralized only HIV-1 bearing sequences most similar to the clade C 96ZM651 Env gp140 carried by the anti-LOX-1 vehicle. These data, as well as the safety of this protein vaccine, justify further exploration of this DC-targeting vaccine approach for protective immunity against HIV-1
Variability of black carbon mass concentrations, sub-micrometer particle number concentrations and size distributions: results of the German Ultrafine Aerosol Network ranging from city street to High Alpine locations
This work reports the first statistical analysis of multi-annual data on tropospheric aerosols from the German Ultrafine Aerosol Network (GUAN). Compared to other networks worldwide, GUAN with 17 measurement locations has the most sites equipped with particle number size distribution (PNSD) and equivalent black carbon (eBC) instruments and the most site categories in Germany ranging from city street/roadside to High Alpine. As we know, the variations of eBC and particle number concentration (PNC) are influenced by several factors such as source, transformation, transport and deposition. The dominant controlling factor for different pollutant parameters might be varied, leading to the different spatio-temporal variations among the measured parameters. Currently, a study of spatio-temporal variations of PNSD and eBC considering the influences of both site categories and spatial scale is still missing. Based on the multi-site dataset of GUAN, the goal of this study is to investigate how pollutant parameters may interfere with spatial characteristics and site categories
- …