Lipid coated liquid crystal droplets for the on-chip detection of antimicrobial peptides

We describe a novel biosensor based on phospholipid-coated nematic liquid crystal (LC) droplets and demonstrate the detection of Smp43, a model antimicrobial peptide (AMP) from the venom of North African scorpion Scorpio maurus palmatus. Mono-disperse lipid-coated LC droplets of diameter 16.7 ± 0.2 μm were generated using PDMS microfluidic devices with a flow-focusing configuration and were the target for AMPs. The droplets were trapped in a bespoke microfluidic trap structure and were simultaneously treated with Smp43 at gradient concentrations in six different chambers. The disruption of the lipid monolayer by the Smp43 was detected (<6 μM) at concentrations well within its biologically active range, indicated by a dramatic change in the appearance of the droplets associated with the transition from a typical radial configuration to a bipolar configuration, which is readily observed by polarizing microscopy. This suggests the system has feasibility as a drug-discovery screening tool. Further, compared to previously reported LC droplet biosensors, this LC droplet biosensor with a lipid coating is more biologically relevant and its ease of use in detecting membrane-related biological processes and interactions has the potential for development as a reliable, low-cost and disposable point of care diagnostic tool

The headgroup orientation of dimyristoylphosphatidylinositol-4-phosphate in mixed lipid bilayers: a neutron diffraction study

AbstractThe trisodium salt of dimyristoylphosphatidylinositol-4-phosphate (DMPI-4P) has been synthesised specifically deuterated at particular sites in the headgroup. These materials have been used in neutron diffraction experiments, which successfully located the position (depth) of each of these deuterated sites to within ±0.5 Å in a mixed model membrane (a 1:1 molar mixture of DMPI-4P with dimyristoyl-phosphatidylcholine, DMPC, in the Lα phase, hydrated to the level of 28 water molecules per lipid molecule). The diffracted intensities were measured at four different D2O/H2O ratios and six orders of diffraction were obtained. These data sets, in conjunction with computer modelling, have been used to determine the orientation of the inositol ring of DMPI-4P, localising each vertical H–H distance to within approximately ±0.03 Å. The orientation of the inositol ring is found to be one in which the C5 hydroxyl is extended out into the aqueous medium. This is, therefore, the most accessible site for water-borne reagents. This may be significant for the important pathway leading from PI-4P to PI-4,5P2. On the assumption that the P/ODAG bond is orientated parallel to the bilayer normal, these results are consistent with two possible conformations for the portion of the headgroup connecting the diacylglycerol to the inositol ring. Distinction between these two is difficult, but one may be favoured since the other involves close atom–atom contacts

Sub‐nanometer thick gold nanosheets as highly efficient catalysts

2D metal nanomaterials offer exciting prospects in terms of their properties and functions. However, the ambient aqueous synthesis of atomically‐thin, 2D metallic nanomaterials represents a significant challenge. Herein, freestanding and atomically‐thin gold nanosheets with a thickness of only 0.47 nm (two atomic layers thick) are synthesized via a one‐step aqueous approach at 20 °C, using methyl orange as a confining agent. Owing to the high surface‐area‐to‐volume ratio, abundance of unsaturated atoms exposed on the surface and large interfacial areas arising from their ultrathin 2D nature, the as‐prepared Au nanosheets demonstrate excellent catalysis performance in the model reaction of 4‐nitrophenol reduction, and remarkable peroxidase‐mimicking activity, which enables a highly sensitive colorimetric sensing of H2O2 with a detection limit of 0.11 × 10−6 m. This work represents the first fabrication of freestanding 2D gold with a sub‐nanometer thickness, opens up an innovative pathway toward atomically‐thin metal nanomaterials that can serve as model systems for inspiring fundamental advances in materials science, and holds potential across a wide region of applications

Sub‐nanometer thick gold nanosheets: sub‐nanometer thick gold nanosheets as highly efficient catalysts (Adv. Sci. 21/2019)

In article number 1900911, Stephen D. Evans and co‐workers develop an ambient aqueous synthesis for preparing atomically‐thin gold nanosheets (termed gold nanoseaweed, AuNSW, because of its morphology, color and aqueous growth). These AuNSWs represent the first free‐standing 2D gold with a sub‐nanometer thickness (0.47 nm, e.g., two atomic layers thick), and exhibit excellent catalysis performance in the model reaction of 4‐nitrophenol reduction, as well as remarkable peroxidase‐mimicking activity

The TREAT-NMD advisory committee for therapeutics (TACT): an innovative de-risking model to foster orphan drug development

Despite multiple publications on potential therapies for neuromuscular diseases (NMD) in cell and animal models only a handful reach clinical trials. The ability to prioritise drug development according to objective criteria is particularly critical in rare diseases with large unmet needs and a limited numbers of patients who can be enrolled into clinical trials. TREAT-NMD Advisory Committee for Therapeutics (TACT) was established to provide independent and objective guidance on the preclinical and development pathway of potential therapies (whether novel or repurposed) for NMD. We present our experience in the establishment and operation of the TACT. TACT provides a unique resource of recognized experts from multiple disciplines. The goal of each TACT review is to help the sponsor to position the candidate compound along a realistic and well-informed plan to clinical trials, and eventual registration. The reviews and subsequent recommendations are focused on generating meaningful and rigorous data that can enable clear go/no-go decisions and facilitate longer term funding or partnering opportunities. The review process thereby acts to comment on viability, de-risking the process of proceeding on a development programme. To date TACT has held 10 review meeting and reviewed 29 program applications in several rare neuromuscular diseases: Of the 29 programs reviewed, 19 were from industry and 10 were from academia; 15 were for novel compounds and 14 were for repurposed drugs; 16 were small molecules and 13 were biologics; 14 were preclinical stage applications and 15 were clinical stage applications. 3 had received Orphan drug designation from European Medicines Agency and 3 from Food and Drug Administration. A number of recurrent themes emerged over the course of the reviews and we found that applicants frequently require advice and education on issues concerned with preclinical standard operating procedures, interactions with regulatory agencies, formulation, repurposing, clinical trial design, manufacturing and ethics. Over the 5 years since its establishment TACT has amassed a body of experience that can be extrapolated to other groups of rare diseases to improve the community's chances of successfully bringing new rare disease drugs to registration and ultimately to marke

Columnar Liquid Crystals in Cylindrical Nanoconfinement

Axial orientation of discotic columnar liquid crystals in nanopores of inorganic templates, with the columns parallel to the axis of the nanochannels, is considered desirable for applications such as production of molecular wires. Here, we evaluate experimentally the role of the rigidity of the LC columns in achieving such orientation in nanopores where the planar anchoring (i.e., columns parallel to wall surface) is enforced. We studied the columnar phase of several discotic compounds with increasing column rigidity in the following order: dendronized carbazole, hexakis(hexyloxy)triphenylene (HAT6), a 1:1 HAT6-trinitrofluorenone (TNF) complex, and a helicene derivative. Using 2-D X-ray diffraction, AFM, grazing incidence diffraction, and polarized microscopy, we observed that the orientation of the columns changes from circular concentric to axial with increasing column rigidity. Additionally, when the rigidity is borderline, increasing pore diameter can change the configuration from axial back to circular. We derive expressions for distortion free energy that suggest that the orientation is determined by the competition between, on the one hand, the distortion energy of the 2-d lattice and the mismatch of its crystallographic facets with the curved pore wall in the axial orientation and, on the other hand, the bend energy of the columns in the circular configuration. Furthermore, the highly detailed AFM images of the core of the disclinations of strength +1 and +1/2 in the center of the pore reveal that the columns spiral down to the very center of the disclination and that there is no amorphous or misaligned region at the core, as suggested previously