Assessment of changes in potential nutrient limitation in an impounded river after application of lanthanum-modified bentonite

With the advent of phosphorus (P)-adsorbent materials and techniques to address eutrophication in aquatic systems, there is a need to develop interpretive techniques to rapidly assess changes in potential nutrient limitation. In a trial application of the P-adsorbent, lanthanum-modified bentonite (LMB) to an impounded section of the Canning River, Western Australia, a combination of potential P, nitrogen (N) and silicon (Si) nutrient limitation diagrams based on dissolved molar nutrient ratios and actual dissolved nutrient concentrations have been used to interpret trial outcomes. Application of LMB resulted in rapid and effective removal of filterable reactive P (FRP) from the water column and also effectively intercepted FRP released from bottom sediments until the advent of a major unseasonal flood event. A shift from potential N-limitation to potential P-limitation also occurred in surface waters. In the absence of other factors, the reduction in FRP was likely to be sufficient to induce actual nutrient limitation of phytoplankton growth. The outcomes of this experiment underpins the concept that, where possible in the short-term, in managing eutrophication the focus should not be on the limiting nutrient under eutrophic conditions (here N), but the one that can be made limiting most rapidly and cost-effectively (P)

Editorial – A critical perspective on geo-engineering for eutrophication management in lakes

Eutrophication is the primary worldwide water quality issue. Reducing excessive external nutrient loading is the most straightforward action in mitigating eutrophication, but lakes, ponds and reservoirs often show little, if any, signs of recovery in the years following external load reduction. This is due to internal cycling of phosphorus (P). Geo-engineering, which we can here define as activities intervening with biogeochemical cycles to control eutrophication in inland waters, represents a promising approach, under appropriate conditions, to reduce P release from bed sediments and cyanobacteria accumulation in surface waters, thereby speeding up recovery. In this overview, we draw on evidence from this special issue Geoengineering in Lakes, and on supporting literature to provide a critical perspective on the approach. We demonstrate that many of the strong P sorbents in the literature will not be applicable in the field because of costs and other constraints. Aluminium and lanthanum modified compounds are among the most effective compounds for targeting P. Flocculants and ballast compounds can be used to sink cyanobacteria, in the short term. We emphasize that the first step in managing eutrophication is a system analysis that will reveal the main water and P flows and the biological structure of the waterbody. These site specific traits can be significant confounding factors dictating successful eutrophication management. Geo-engineering techniques, considered collectively, as part of a tool kit, may ensure successful management of eutrophication through a range of target effects. In addition, novel developments in modified zeolites offer simultaneous P and nitrogen control. To facilitate research and reduce the delay from concept to market a multi-national centre of excellence is required

Assessing the responses of aquatic macrophytes to the application of a lanthanum modified bentonite clay, at Loch Flemington, Scotland, UK

Loch Flemington is a shallow lake of international conservation and scientific importance. In recent decades, its status has declined as a result of eutrophication and the establishment of non-native invasive aquatic macrophytes. As previous research had identified the lake bed sediments as an important source of phosphorus (P), the P-capping material Phoslock® was applied to improve water quality. This article documents the responses of the aquatic macrophyte community by comparing data collected between 1988 and 2011. Summer water-column total P concentrations decreased significantly and water clarity increased following treatment. Aquatic plant colonisation depth increased and plant coverage of the lake bed extended. However, the submerged vegetation remained dominated by the non-native Elodea canadensis Michx. Aquatic macrophyte community metrics indicated no significant change in trophic status. Species richness and the number of ‘natural’ eutrophic characteristic species remained broadly similar with no records of rare species of conservation interest. Loch Flemington is still classified as being in ‘unfavourable no change’ condition based on its aquatic macrophytes despite the water quality improvements. The implications of these results are discussed in relation to the future management of Loch Flemington and in the wider context of trying to improve our understanding of lake restoration processes

Global actions for a sustainable phosphorus future

Food security and healthy freshwater ecosystems are placed at jeopardy by poor phosphorus management. Scientists are calling for transformation across food, agriculture, waste and other sectors — mobilized through intergovernmental action, which has been missing thus far

Concerns about global phosphorus demand for lithium-iron-phosphate batteries in the light electric vehicle sector

A 'Matters Arising' article, arising from: Xu, C. et al. (2020). Future material demand for automotive lithium-based batteries. Communications Materials 1: 99

Responses in sediment phosphorus and lanthanum concentrations and composition across 10 lakes following applications of lanthanum modified bentonite

A combined field and laboratory scale study of 10 European lakes treated between 2006 and 2013 with a lanthanum (La) modified bentonite (LMB) to control sediment phosphorus (P) release was conducted. The study followed the responses in sediment characteristics including La and P fractions and binding forms, P adsorption capacity of discrete sediment layers, and pore water P concentrations. Lanthanum phosphate mineral phases were confirmed by solid state 31P MAS NMR and LIII EXAFS spectroscopy. Rhabdophane (LaPO4 · nH2O) was the major phase although indications of monazite (LaPO4) formation were also reported, in the earliest treated lake. Molar ratios between La and P in the sediments were generally above 1, demonstrating excess La relative to P. Lanthanum was vertically mixed in the sediment down to a depth of 10 cm for eight of the ten lakes, and recovery of La in excess of 100% of the theoretical aerial load indicated translocation of the LMB towards the deepest areas of the lakes. Lanthanum was generally recovered from bed sediment samples following sequential chemical extraction from the HCl fraction. Soluble reactive P (SRP) release experiments on intact sediment cores indicated conditions of P retention (with the exception of two lakes) by sediments, indicating effective control of sediment P release, i.e. between two and nine years after treatment

Interacting impacts of hydrological changes and air temperature warming on lake temperatures highlight the potential for adaptive management

Globally, climate warming is increasing air temperatures and changing river flows, but few studies have explicitly considered the consequences for lake temperatures of these dual effects, or the potential to manage lake inflows to mitigate climate warming impacts. Using a one-dimensional model, we tested the sensitivity of lake temperatures to the separate and interacting effects of changes in air temperature and inflow on a small, short-residence time (annual average ≈ 20 days), temperate lake. Reducing inflow by 70% increased summer lake surface temperatures 1.0–1.2 °C and water column stability by 11–19%, equivalent to the effect of 1.2 °C air temperature warming. Conversely, similar increases in inflow could result in lake summer cooling, sufficient to mitigate 0.75 °C air temperature rise, increasing to more than 1.1 °C if inflow temperature does not rise. We discuss how altering lake inflow volume and temperature could be added to the suite of adaptation measures for lakes

Macronutrient processing by temperate lakes: a dynamic model for long-term, large-scale application

We developed a model of the biogeochemical and sedimentation behaviour of carbon (C), nitrogen (N) and phosphorus (P) in lakes, designed to be used in long-term (decades to centuries) and large-scale (104 – 105 km2) macronutrient modelling, with a focus on human-induced changes. The model represents settling of inflow suspended particulate matter, production and settling of phytoplankton, decomposition of organic matter in surface sediment, denitrification, and DOM flocculation and decomposition. The model uses 19 parameters, 13 of which are fixed a priori. The remaining 6 were obtained by fitting data from 109 temperate lakes, together with other information from the literature, which between them characterised the stoichiometric incorporation of N and P into phytoplankton via photosynthesis, whole-lake retention of N and P, N removal by denitrification, and the sediment burial of C, N and P. To run the model over the long periods of time necessary to simulate sediment accumulation and properties, simple assumptions were made about increases in inflow concentrations and loads of dissolved N and P and of catchment-derived particulate matter (CPM) during the 20th century. Agreement between observations and calculations is only approximate, but the model is able to capture wide trends in the lakewater and sediment variables, while also making reasonable predictions of net primary production. Modelled results suggest that allochthonous sources of carbon (CPM and dissolved organic matter) contribute more to sediment carbon than the production and settling of algal biomass, but the relative contribution due to algal biomass has increased over time. Simulations for 8 UK lakes with sediment records suggest that during the 20th century average carbon fixation increased 6-fold and carbon burial in sediments by 70%, while the delivery of suspended sediment from the catchments increased by 40% and sediment burial rates of N and P by 131% and 185% respectively

Interacting impacts of hydrological changes and air temperature warming on lake temperatures highlight the potential for adaptive management

Globally, climate warming is increasing air temperatures and changing river flows, but few studies have explicitly considered the consequences for lake temperatures of these dual effects, or the potential to manage lake inflows to mitigate climate warming impacts. Using a one-dimensional model, we tested the sensitivity of lake temperatures to the separate and interacting effects of changes in air temperature and inflow on a small, short-residence time (annual average ≈ 20 days), temperate lake. Reducing inflow by 70% increased summer lake surface temperatures 1.0–1.2 °C and water column stability by 11–19%, equivalent to the effect of 1.2 °C air temperature warming. Conversely, similar increases in inflow could result in lake summer cooling, sufficient to mitigate 0.75 °C air temperature rise, increasing to more than 1.1 °C if inflow temperature does not rise. We discuss how altering lake inflow volume and temperature could be added to the suite of adaptation measures for lakes