A simple dead-reckoning navigational system

Simple navigation system is designed for vehicles operating in remote locations where it is not feasible to transport extensive equipment. System consists of four main components: directional gyrocompass to establish inertial direction; odometer to measure distance; signal processor to combine measured distance and direction; and sun compass to determine initial direction

X-ray photoemission characterization of La_{0.67}(Ca_{x}Sr_{1-x})_{0.33}MnO_{3} films

The Curie temperature and x-ray photoemission spectra of thin films of La_{0.67}(Ca_{x}Sr_{1-x})_{0.33}MnO_{3} (LCSMO) have been studied as a function of the Ca/Sr ratio. The films were grown by off-axis cosputtering from individual targets of La_{0.67}Ca_{0.33}MnO_{3} (LCMO) and La_{0.67}Sr_{0.33}MnO_{3} (LSMO) onto (100) oriented NdGaO_{3} substrates. The films grow with a (100) orientation, with no other orientations observed by x-ray diffraction. For the alloy mixtures, the Curie temperature, T_C, varies slowly as the Ca/Sr is decreased, remaining $\approx$ 300 K, while for the LCMO and LSMO films T_C is 260 and 330 K, respectively. The Mn-O valence structure is composed of two dominant peaks, whose positions undergo a change as the Ca fraction is decreased. The core lines behave as linear combinations of lines from pure LCMO and LSMO.Comment: 3 pages, 5 eps figures. To be published in Journal of Applied Physics (Proceedings of MMM'98

Characterization of transport and magnetic properties in thin film La(0.67)(Ca(x)Sr(1-x))(0.33)MnO(3) mixtures

We have grown thin films of (100) oriented La_{0.67}(Ca_{x}Sr_{1-x})_{0.33}MnO_{3} on (100) NdGaO_{3} substrates by off-axis sputtering. We have looked at the changes in the resistivity and magnetoresistance of the samples as the Ca/Sr ratio was varied. We find that as the calcium fraction is decreased, the lattice match to the substrate decreases, and the films become more disordered, as observed in transport measurements and the variation in Curie and peak resistance temperatures. We find a correlation between the temperature independent and T^2 terms to the low temperature resistivity. The room temperature magnetoresistance exhibits a maximum as the peak temperature is increased by the substitution of Sr for Ca, and a change in the field dependence to the resistivity at room temperature is observed.Comment: 5 pages, 6 eps figures, to be published in Journal of Applied Physic

Mycobiome of the Bat White Nose Syndrome (WNS) Affected Caves and Mines reveals High Diversity of Fungi and Local Adaptation by the Fungal Pathogen Pseudogymnoascus (Geomyces) destructans

The investigations of the bat White Nose Syndrome (WNS) have yet to provide answers as to how the causative fungus Pseudogymnoascus (Geomyces) destructans (Pd) first appeared in the Northeast and how a single clone has spread rapidly in the US and Canada. We aimed to catalogue Pd and all other fungi (mycobiome) by the culture-dependent (CD) and culture-independent (CI) methods in four Mines and two Caves from the epicenter of WNS zoonotic. Six hundred sixty-five fungal isolates were obtained by CD method including the live recovery of Pd. Seven hundred three nucleotide sequences that met the definition of operational taxonomic units (OTUs) were recovered by CI methods. Most OTUs belonged to unidentified clones deposited in the databases as environmental nucleic acid sequences (ENAS). The core mycobiome of WNS affected sites comprised of 46 species of fungi from 31 genera recovered in culture, and 17 fungal genera and 31 ENAS identified from clone libraries. Fungi such as Arthroderma spp., Geomyces spp., Kernia spp., Mortierella spp., Penicillium spp., and Verticillium spp. were predominant in culture while Ganoderma spp., Geomyces spp., Mortierella spp., Penicillium spp. and Trichosporon spp. were abundant is clone libraries. Alpha diversity analyses from CI data revealed that fungal community structure was highly diverse. However, the true species diversity remains undetermined due to under sampling. The frequent recovery of Pd indicated that the pathogen has adapted to WNS-afflicted habitats. Further, this study supports the hypothesis that Pd is an introduced species. These findings underscore the need for integrated WNS control measures that target both bats and the fungal pathogen.Comment: 59 pages, 7figure

Structural Analysis of Substrate, Reaction Intermediate, and Product Binding in Haemophilus influenzae Biotin Carboxylase

© 2015 American Chemical Society. Acetyl-CoA carboxylase catalyzes the first and regulated step in fatty acid synthesis. In most Gram-negative and Gram-positive bacteria, the enzyme is composed of three proteins: biotin carboxylase, a biotin carboxyl carrier protein (BCCP), and carboxyltransferase. The reaction mechanism involves two half-reactions with biotin carboxylase catalyzing the ATP-dependent carboxylation of biotin-BCCP in the first reaction. In the second reaction, carboxyltransferase catalyzes the transfer of the carboxyl group from biotin-BCCP to acetyl-CoA to form malonyl-CoA. In this report, high-resolution crystal structures of biotin carboxylase from Haemophilus influenzae were determined with bicarbonate, the ATP analogue AMPPCP; the carboxyphosphate intermediate analogues, phosphonoacetamide and phosphonoformate; the products ADP and phosphate; and the carboxybiotin analogue N1′-methoxycarbonyl biotin methyl ester. The structures have a common theme in that bicarbonate, phosphate, and the methyl ester of the carboxyl group of N1′-methoxycarbonyl biotin methyl ester all bound in the same pocket in the active site of biotin carboxylase and as such utilize the same set of amino acids for binding. This finding suggests a catalytic mechanism for biotin carboxylase in which the binding pocket that binds tetrahedral phosphate also accommodates and stabilizes a tetrahedral dianionic transition state resulting from direct transfer of CO2 from the carboxyphosphate intermediate to biotin

A rim-and-spoke hypothesis to explain the biomechanical roles for cytoplasmic intermediate filament networks

Textbook images of keratin intermediate filament (IF) networks in epithelial cells and the functional compromization of the epidermis by keratin mutations promulgate a mechanical role for this important cytoskeletal component. In stratified epithelia, keratin filaments form prominent radial spokes that are focused onto cell-cell contact sites, i.e. the desmosomes. In this Hypothesis, we draw attention to a subset of keratin filaments that are apposed to the plasma membrane. They form a rim of filaments interconnecting the desmosomes in a circumferential network. We hypothesize that they are part of a rim-and-spoke arrangement of IFs in epithelia. From our review of the literature, we extend this functional role for the subplasmalemmal rim of IFs to any cell, in which plasma membrane support is required, provided these filaments connect directly or indirectly to the plasma membrane. Furthermore, cytoplasmic IF networks physically link the outer nuclear and plasma membranes, but their participation in mechanotransduction processes remain largely unconsidered. Therefore, we also discuss the potential biomechanical and mechanosensory role(s) of the cytoplasmic IF network in terms of such a rim (i.e. subplasmalemmal)-and-spoke arrangement for cytoplasmic IF networks

A high-field adiabatic fast passage ultracold neutron spin flipper for the UCNA experiment

The UCNA collaboration is making a precision measurement of the β asymmetry (A) in free neutron decay using polarized ultracold neutrons (UCN). A critical component of this experiment is an adiabatic fast passage neutron spin flipper capable of efficient operation in ambient magnetic fields on the order of 1 T. The requirement that it operate in a high field necessitated the construction of a free neutron spin flipper based, for the first time, on a birdcage resonator. The design, construction, and initial testing of this spin flipper prior to its use in the first measurement of A with UCN during the 2007 run cycle of the Los Alamos Neutron Science Center's 800 MeV proton accelerator is detailed. These studies determined the flipping efficiency of the device, averaged over the UCN spectrum present at the location of the spin flipper, to be ϵ(overbar) = 0.9985(4)

ZFOURGE: Using Composite Spectral Energy Distributions to Characterize Galaxy Populations at 1<z<4

We investigate the properties of galaxies as they shut off star formation over the 4 billion years surrounding peak cosmic star formation. To do this we categorize $\sim7000$ galaxies from $1<z<4$ into $90$ groups based on the shape of their spectral energy distributions (SEDs) and build composite SEDs with $R\sim 50$ resolution. These composite SEDs show a variety of spectral shapes and also show trends in parameters such as color, mass, star formation rate, and emission line equivalent width. Using emission line equivalent widths and strength of the 4000\AA\ break, $D(4000)$, we categorize the composite SEDs into five classes: extreme emission line, star-forming, transitioning, post-starburst, and quiescent galaxies. The transitioning population of galaxies show modest H$\alpha$ emission ($EW_{\rm REST}\sim40$\AA) compared to more typical star-forming composite SEDs at $\log_{10}(M/M_\odot)\sim10.5$ ($EW_{\rm REST}\sim80$\AA). Together with their smaller sizes (3 kpc vs. 4 kpc) and higher S\'ersic indices (2.7 vs. 1.5), this indicates that morphological changes initiate before the cessation of star formation. The transitional group shows a strong increase of over one dex in number density from $z\sim3$ to $z\sim1$, similar to the growth in the quiescent population, while post-starburst galaxies become rarer at $z\lesssim1.5$. We calculate average quenching timescales of 1.6 Gyr at $z\sim1.5$ and 0.9 Gyr at $z\sim2.5$ and conclude that a fast quenching mechanism producing post-starbursts dominated the quenching of galaxies at early times, while a slower process has become more common since $z\sim2$.Comment: Accepted for publication in The Astrophysical Journa