15 research outputs found

    Improvement in HSS grade for early stands of hot strip mills - Metallurgical features and mechanical properties assessment

    Full text link
    peer reviewedAurora and Kosmos grades are HSS alloys belonging to the complex Fe-Cr-C-X system, where X is a strong carbide former element of the V, Mo or W type. Both alloys were metallurgically characterised prior to their comparison. Metallurgical analyses involved phases identification and carbides quantification by using Scanning Electron Microscopy and Energy Dispersive X rays. Differential Thermal Analysis was performed to allow a better understanding of the solidification sequence of studied alloys while mechanical tests performed were compressive at room temperature and bulk hardness at usual service temperatures. An attempt was made in order to connect experimental results to the good behaviour in operation of Aurora grade. In fact Aurora grade appeared to exhibit strong metallurgical differences when compared to Kosmos grade, especially as concern in nature and amount of carbides

    Metallurgical assessment of two HSS rolls grades for Hot Strip Mill

    Full text link
    peer reviewedAurora and Kosmos grades are HSS alloys used for the manufacturing of rolling mill work rolls for early finishing stands of Hot Strip Mills. Both alloys were metallurgically assessed using Electron Microscopy, X Rays analysis on carbides and Differential Thermal Analysis. These methods allow a better understanding of the behaviour of the studied alloys during solidification and cooling. Some mechanical tests were also performed. A connection between the laboratory results and the performance in operation of both grades is performed. The strong metallurgical differences especially as concern the nature and amount of carbides allow to explain the good behaviour in service of Aurora

    Physical metallurgy of a HSS material for hot rolling mill rolls

    Full text link
    peer reviewedHigh Speed Steel (HSS) cast rolls are used in front finishing stands of hot strip mills. Good wear resistance and hardness at high temperatures, are defining features of HSS. Many types of carbides are present in these alloys, each having different effect upon their final properties. As a result, nature, morphology and amount of these carbides are factors of important concern. Identification and characterisation of carbides were realised. MC, M2C, M7C3 carbides were found. Some relationships with mechanical properties were obtained especially in the field of the solidification sequence that affects grain size and carbides dispersion

    Effect of austenite destabilisation heat treatment on graphite precipitation in chromium iron

    Full text link
    peer reviewedDuring solidification of chromium iron, carbides such as M7C3 are precipitating. It is possible to obtain crystallized graphite in the asaCast state by modifying the composition of the alloy[lJ.The aim of the study is to understanding the mechanism of precipitation of graphite not only during solidification but also during heat treatment. Dilatometric, microcalorimetric, resistometric and microstructural examination methods were used for the investigations. We have shown that graphite precipitation occurs by decomposition ofM7C3 chromium carbides during austenite destabilisation heat treatment. The shape and the amount of graphite depend on the treatment temperature and time

    Use of graphite chromium cast iron in hot strip mill

    Full text link
    peer reviewedIn this paper, we will point out the good properties of the new material called graphitic chromium iron and show that it can lead to an optimised compromise between oxidation, wear and thermal behaviour allowing its use as work roll in the last stands of the finishing section of HSM. We will also summarise the results of a study aimed to examine the graphite formation conditions in high chromium iron and the effect of an austenite de-stabilisation heat treatment on the graphitisation. The amount and volume of free graphite may be dramatically influenced by a suitable heat treatment, which increases the thermal properties. Some manufacturing problems associated with the residual stresses of that new grade will also be explained

    L'auteur

    No full text
    Parce qu’il en va du sens même de l’enseignement de la littérature et probablement de son avenir, il est temps de récuser à la fois l’annexion de l’Auteur par « l’histoire littéraire » et sa mise à l’écart au seul bénéfice de « l’analyse textuelle » et de ses dérivés méthodologiques. La question de « l’auteur » - c’est-à-dire de la singularité d’une vie immergée dans le langage - est en effet au cœur de l’expérience nourricière de la lecture, ou devrait l’être. Il n’y a donc pas lieu de s’étonner si, à l’invitation du Centre de Recherches sur les Modernités Littéraires de l’Université Michel de Montaigne (Bordeaux 3) et de l’IUFM d’Aquitaine, des écrivains, des biographes, des théoriciens du littéraire et des spécialistes de l’enseignement du français ont accepté de prendre au sérieux cette question controversée de « l’auteur », en la considérant comme une variable majeure de la réalité du texte et de la relation que l’on entretient avec lui. De fait, ce volume présente un éventail d’approches et de perspectives nouvelles, à la lumière de recherches en cours. Il se propose ainsi d’offrir au lecteur ordinaire comme au chercheur, matière à frayer les voies d’une critique inventive. Les quatre volets qui organisent cet ouvrage - « Ouvertures », « Les Discours de légitimation », « Lieux et territoires », « Les enjeux d’une relation », loin, d’ailleurs, de prétendre clore la discussion, en suggèrent au contraire la dynamique. Pourvus d’un « visage », d’un « corps » et d’une « vie » irréductibles à ceux de l’état civil, les auteurs sont d’abord l’incarnation de leurs œuvres telles qu’elles sont reçues et perçues par une époque, une génération, mais aussi par une mémoire et des institutions. Il fallait donc tenter de démêler la trame de cette fable en cessant d’opposer « biographie » et « mythographie », histoire et légende, portrait et icône, pour tenter de reconnaître ce qui, à travers le temps, nous relie de multiples façons à cet étranger si familier, que l’on désigne sous le nom d’« auteur » - notion que la littérature n’a cessé, sous toutes les latitudes, de réinventer. A charge pour les enseignants d’en témoigner, moins en qualité de techniciens du texte que de passeurs, toujours sur le qui-vive
    corecore