Characterization of viscoplasticity behaviour of P91 and P92 power plant steels

This paper deals with the determination of material constitutive model for P91 and P92 steels at high temperatures. An isothermal, strain-controlled test programme was conducted for both steels for a temperature range between 400 and 675 °C. The experimental data from these tests were used to obtain the material constants in a viscoplasticity model. The model includes the effects of isotropic and kinematic hardening, as well as time-dependent effects, and has been used to model the cyclic material behaviour of each material. Material constants were initially determined from initial cycle stress–strain data, maximum stress evolution data and stress relaxation data. The material constants were improved by use of a least-squares optimisation algorithm. The constitutive models have been implemented into the ABAQUS finite element (FE) code by using the Z-mat software. The performances of the material models for both steels have been assessed by comparing predictions with experimental data obtained from the tests

Modelling of a Grade 91 power plant pressurised header weldment under ultra super-critical creep conditions

This paper is concerned with the creep-damage modelling of a Grade 91 pressurised header, which was observed to undergo in-service cracking in the weldments. A multi-axial creep damage model of Kachanov type, with a single state damage variable, has been implemented into finite element analysis to study the creep damage responses of weldments and the sub-zones i.e. the base metal (BM), weld metal (WM) and heat-affected zone (HAZ). Material properties for each weld constituent were obtained from the results of accelerated creep tests on materials extracted from the header. Predictions of crack initiation were made for sections of the stub to header welds. This analysis was also used to estimate creep failure life of the header weldment under ultra-super-critical conditions. Further, creep crack growth behaviour was predicted based on time-dependent critical damage growth. The predicted damage distributions and failure mode of the cross-weld creep test specimens were in good agreement with the reported experimental observations. The predicted damage distributions and cracking in the header correlate reasonably well with the reported industrial observations

Heritability and mechanisms of n-3 long chain polyunsaturated fatty acid deposition in the flesh of Atlantic salmon

N-3 long chain polyunsaturated fatty acids (n-3LC-PUFA) are essential components of vertebrate membrane lipids and are crucially deficient in modern Western diets. The main human dietary source for n-3LC-PUFA is fish and seafood, particularly oily fish and over 50% of global fish production is currently supplied by aquaculture. However, increasing pressure to include vegetable oils, which are devoid of n-3LC-PUFA, in aquaculture feeds reduces the content of these crucial nutrients in farmed fish flesh. The aim of this study was to measure the heritability and infer mechanisms determining flesh n-3LC-PUFA content in Atlantic salmon. This was achieved by analysing flesh lipid parameters in 48 families of Atlantic salmon, and by measuring differences in hepatic mRNA expression in families with high and low flesh n-3LC-PUFA. The results show that flesh n-3LC-PUFA level is a highly heritable trait (h2 = 0.77±0.14) and indicate the involvement of increased lipid transport, most likely in the form of very low density lipoprotein (VLDL) from liver. This increase in lipid transport may be associated with increased activity of a transcription factor, hepatic nuclear factor 4α (HNF4α), possibly as a result of family differences in transforming growth factor β1 (Tgfβ1) signalling. This study paves the way for identification of quantitative trait loci and gene interaction networks that are associated with levels of n-3LC-PUFA in fish flesh. Such markers can be used to assist the sustainable production of Atlantic salmon and provide optimal levels of critical nutrients for human consumers

EVALUATING THE PERFORMANCE OF THE 21ST AVENUE WEST FRESHWATER ESTUARY RESTORATION IN DULUTH HARBOR: CASE STUDY I

67 pagesSupplemental file(s) description: None.This thesis focuses on 21st Avenue West Habitat Restoration in Duluth Harbor (Lake Superior), Minnesota as a case study where initial environmental sampling conducted in 2010 indicated impairment of overall aquatic health based on biological indicators, in particular degradation of benthos. Over 750,000 cubic yards of beneficial use of dredge material was place within established construction footprints to cap mildly contaminated sediments. A scaled trimetric index (s-TMI), scored between 0 to 1, was used to represent the benthic community, where an increasing score is indicative to improving benthic condition. Median s-TMI values for 21st Avenue responded with a positive trend towards recovery, and depending on defining reference, met the quantifiable Beneficial Use Impairment removal target for reference conditions

Assessing the Impact of Site-Specific BMPs Using a Spatially Explicit, Field-Scale SWAT Model with Edge-of-Field and Tile Hydrology and Water-Quality Data in the Eagle Creek Watershed, Ohio

The Eagle Creek watershed, a small subbasin (125 km2) within the Maumee River Basin, Ohio, was selected as a part of the Great Lakes Restoration Initiative (GLRI) “Priority Watersheds” program to evaluate the effectiveness of agricultural Best Management Practices (BMPs) funded through GLRI at the field and watershed scales. The location and quantity of BMPs were obtained from the U.S. Department of Agriculture-Natural Resources Conservation Service National Conservation Planning (NCP) database. A Soil and Water Assessment Tool (SWAT) model was built and calibrated for this predominantly agricultural Eagle Creek watershed, incorporating NCP BMPs and monitoring data at the watershed outlet, an edge-of-field (EOF), and tile monitoring sites. Input air temperature modifications were required to induce simulated tile flow to match monitoring data. Calibration heavily incorporated tile monitoring data to correctly proportion surface and subsurface flow, but calibration statistics were unsatisfactory at the EOF and tile monitoring sites. At the watershed outlet, satisfactory to very good calibration statistics were achieved over a 2-year calibration period, and satisfactory statistics were found in the 2-year validation period. SWAT fixes parameters controlling nutrients primarily at the watershed level; a refinement of these parameters at a smaller-scale could improve field-level calibration. Field-scale modeling results indicate that filter strips (FS) are the most effective single BMPs at reducing dissolved reactive phosphorus, and FS typically decreased sediment and nutrient yields when added to any other BMP or BMP combination. Cover crops were the most effective single, in-field practice by reducing nutrient loads over winter months. Watershed-scale results indicate BMPs can reduce sediment and nutrients, but reductions due to NCP BMPs in the Eagle Creek watershed for all water-quality constituents were less than 10%. Hypothetical scenarios simulated with increased BMP acreages indicate larger investments of the appropriate BMP or BMP combination can decrease watershed level loads

Calibration of a Field-Scale Soil and Water Assessment Tool (SWAT) Model with Field Placement of Best Management Practices in Alger Creek, Michigan

Subwatersheds within the Great Lakes “Priority Watersheds” were targeted by the Great Lakes Restoration Initiative (GLRI) to determine the effectiveness of the various best management practices (BMPs) from the U.S. Department of Agriculture-Natural Resources Conservation Service National Conservation Planning (NCP) Database. A Soil and Water Assessment Tool (SWAT) model is created for Alger Creek, a 50 km2 tributary watershed to the Saginaw River in Michigan. Monthly calibration yielded very good Nash–Sutcliffe efficiency (NSE) ratings for flow, sediment, total phosphorus (TP), dissolved reactive phosphorus (DRP), and total nitrogen (TN) (0.90, 0.79, 0.87, 0.88, and 0.77, respectively), and satisfactory NSE rating for nitrate (0.51). Two-year validation results in at least satisfactory NSE ratings for flow, sediment, TP, DRP, and TN (0.83, 0.54, 0.73, 0.53, and 0.60, respectively), and unsatisfactory NSE rating for nitrate (0.28). The model estimates the effect of BMPs at the field and watershed scales. At the field-scale, the most effective single practice at reducing sediment, TP, and DRP is no-tillage followed by cover crops (CC); CC are the most effective single practice at reducing nitrate. The most effective BMP combinations include filter strips, which can have a sizable effect on reducing sediment and phosphorus loads. At the watershed scale, model results indicate current NCP BMPs result in minimal sediment and nutrient reductions (<10%)