19,231 research outputs found
A shape memory alloy adaptive tuned vibration absorber: design and implementation
In this paper a tuned vibration absorber (TVA) is realized using shape memory alloy (SMA) elements. The elastic modulus of SMA changes with temperature and this effect is exploited to develop a continuously tunable device.A TVA with beam elements is described, a simple two-degree-of-freedom model developed and the TVA characterized experimentally. The behaviour during continuous heating and cooling is examined and the TVA is seen to be continuously tunable. A change in the tuned frequency of 21.4% is observed between the cold, martensite, and hot, austenite, states. This corresponds to a change in the elastic modulus of about 47.5%, somewhat less than expected.The response time of the SMA TVA is long because of its thermal inertia. However, it is mechanically simple and has a reasonably good performance, despite the tuning parameters depending on the current in a strongly nonlinear way
Simulation sample sizes for Monte Carlo partial EVPI calculations
Partial expected value of perfect information (EVPI) quantifies the value of removing uncertainty about unknown parameters in a decision model. EVPIs can be computed via Monte Carlo methods. An outer loop samples values of the parameters of interest, and an inner loop samples the remaining parameters from their conditional distribution. This nested Monte Carlo approach can result in biased estimates if small numbers of inner samples are used and can require a large number of model runs for accurate partial EVPI estimates. We present a simple algorithm to estimate the EVPI bias and confidence interval width for a specified number of inner and outer samples. The algorithm uses a relatively small number of model runs (we suggest approximately 600), is quick to compute, and can help determine how many outer and inner iterations are needed for a desired level of accuracy. We test our algorithm using three case studies. (C) 2010 Elsevier B.V. All rights reserved
A route identification algorithm for assisted living applications fusing WLAN, GPS and image matching data
This paper addresses the automatic identification of often traversedroutes for assisted living applications using WLAN
technology in addition to other modalities. This problem is
complicated by a number of factors, including the changing
and noisy nature of the WLAN channel, the need to track
users seamlessly in both indoor and outdoor environments,
the need for robustness to slight deviations in the precise path taken, and speed, along a route. In this work commonly traversed routes are identified by clustering based on sensed data, two of which take the form of wireless signals: GPS and WLAN. The latter is particularly important as it can be used both indoors and outdoors. In addition an efficient image matching algorithm is implemented to process data from images automatically taken along the route. In this work a finite number of routes were identified within the DCU campus.
Each route was traversed many times over a period of
6 weeks and data sequences collected automatically on each
occasion. Each such traversal of a route is referred to as a trip in what follows. Section (2) outlines the use of Multidimensional Time Warping in order to automatically cluster trips corresponding to specific routes based on wireless and image data sensed on each trip. Section (3) outlines the manner in which data was sensed and presents clustering results for each modality individually as well as results based on a fusion of the data
Using SenseCam images in a multimodal fusion framework for route detection and localisation
Problem of structuring location data is solved by proposing a framework for classifying the data into often-traversed routes. It does not rely on any one source of location information, but can fuse data from multimodal localisation sources: SenseCam images, GPS data and WLAN signal strengths
User tracking using a wearable camera
Abstract—This paper addresses automatic indoor user tracking
based on fusion of WLAN and image sensing. Our motivation is
the increasing prevalence of wearable cameras, some of which can also capture WLAN data. We propose a novel tracking method that can be employed when using image-based, WLAN-based and fusion-based approach only. The effectiveness of combining the strengths of these two complementary modalities is demonstrated
for a very challenging data
Indoor localisation based on fusing WLAN and image data
In this paper we address the automatic identification of indoor locations using a combination of WLAN and image sensing. We demonstrate the effectiveness of combining the strengths of these two complementary modalities for very chal- lenging data. We describe a fusion approach that allows localising to a specific office within a building to a high degree of precision or to a location within that office with reasonable precision. As it can be orientated towards the needs and capabilities of a user based on context the method becomes useful for ambient assisted living applications
Dual-sensor fusion for indoor user localisation
In this paper we address the automatic identification of in- door locations using a combination of WLAN and image sensing. Our motivation is the increasing prevalence of wear- able cameras, some of which can also capture WLAN data. We propose to use image-based and WLAN-based localisa- tion individually and then fuse the results to obtain better performance overall. We demonstrate the effectiveness of our fusion algorithm for localisation to within a 8.9m2 room on very challenging data both for WLAN and image-based algorithms. We envisage the potential usefulness of our ap- proach in a range of ambient assisted living applications
ERTS-C (Landsat 3) cryogenic heat pipe experiment definition
A flight experiment designed to demonstrate current cryogenic heat pipe technology was defined and evaluated. The experiment package developed is specifically configured for flight aboard an ERTS type spacecraft. Two types of heat pipes were included as part of the experiment package: a transporter heat pipe and a thermal diode heat pipe. Each was tested in various operating modes. Performance data obtained from the experiment are applicable to the design of cryogenic systems for detector cooling, including applications where periodic high cooler temperatures are experienced as a result of cyclic energy inputs
An evolutionary economic perspective on technical change and adjustment in cane harvesting systems in the Australian sugar industry
Australian sugar-producing regions have differed in terms of the extent and rate of incorporation of new technology into harvesting systems. The Mackay sugar industry has lagged behind most other sugar-producing regions in this regard. The reasons for this are addressed by invoking an evolutionary economics perspective. The development of harvesting systems, and the role of technology in shaping them, is mapped and interpreted using the concept of path dependency. Key events in the evolution of harvesting systems are identified, which show how the past has shaped the regional development of harvesting systems. From an evolutionary economics perspective, the outcomes observed are the end result of a specific history.Crop Production/Industries,
- …