229 research outputs found
Recommended from our members
Behaviour of moist and saturated sand during shock and release
Relatively little is known about the changes that occur in the shock compaction and release of granular matter with varying levels of moisture. Here, we report a series of plate impact experiments giving shock Hugoniot and release data for a well characterized sand at dry, 10% moist, and saturated water contents. The results reveal that at low moisture content the shock impedance is slightly reduced, while the release remains predominantly inelastic. Close to saturation, much more substantial changes occur: the shock impedance stiffens substantially, the Hugoniot appears to split into two branches, and the release becomes almost completely elastic. We discuss mechanisms underpinning these changes in behavior.This work was supported through the Force Protection Engineering research programme led by QinetiQ Plc. on behalf of DSTL.This is the author accepted manuscript. The final version is available from AIP via http://dx.doi.org/10.1063/1.493468
Recommended from our members
The significance of grain morphology and moisture content on the response of silica sand to ballistic penetration
The dynamic response of sand is of interest for a wide range of applications, from civil engineering to asteroid impact, in addition to defense and industrial processes. Granular dynamics are controlled by a complex network of intergrain force chains; yet, our understanding of how grain morphology, moisture, rate, and loading geometry affect the response to rapid compaction remains limited. Here, we show how just 1% moisture can significantly reduce penetration resistance in silica sand, while smoother-grained material—with a similar bulk density, grain size, and mineralogy—exhibits markedly improved stopping power. Cylindrical targets are impacted by spherical steel projectiles, with Digital Speckle Radiography employed to determine both the penetration depth and the sand bed displacement at a series of incremental time steps after impact. The results provide substantial insight into how slight adjustments to grain-grain contact points can affect the bulk dynamic response of brittle granular materials.</jats:p
Shock Compression of Simulated Adobe
A series of plate impact experiments were conducted to investigate the shock response of a simulant for adobe, a traditional form of building material widely used around the world. Air dried bricks were sourced from the London brick company, dry machined and impacted at a range of velocities in a single stage gas gun. The shock Hugoniot was determined (Us =2.26up+0.37) as well as release information. The material was found to behave in a manner which was similar to that of loose sand and considerably less stiff than a weak porous sandstone. The effect of any cementing of the grains was examined by shocking powdered samples contained within a cell arrangement.The research was funded by the Defence Science and Technology Laboratory (part of UK MoD) under the Weapons Science and Technology Centre
High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications
Geomaterials (i.e. rock, sand, soil and concrete) are increasingly being encountered and used in extreme environments, in terms of the pressure magnitude and the loading rate. Advancing the understanding of the mechanical response of materials to impact loading relies heavily on having suitable high-speed diagnostics. One such diagnostic is high-speed photography, which combined with a variety of digital optical measurement techniques can provide detailed insights into phenomena including fracture, impact, fragmentation and penetration in geological materials. This review begins with a brief history of high-speed imaging. Section 2 discusses of the current state of the art of high-speed cameras, which includes a comparison between charge-coupled device and complementary metal-oxide semiconductor sensors. The application of high-speed photography to geomechanical experiments is summarized in Sect. 3. Section 4 is concerned with digital optical measurement techniques including photoelastic coating, Moiré, caustics, holographic interferometry, particle image velocimetry, digital image correlation and infrared thermography, in combination with high-speed photography to capture transient phenomena. The last section provides a brief summary and discussion of future directions in the field.This work was supported by the Australian Research Council (LE150100058) and Engineering Seed Funding Scheme of Monash University. The first author would like to acknowledge the financial support by the China Scholarship Council
Recommended from our members
Problems Associated with Making Mechanical Measurements on Water–Ice at Quasistatic and Dynamic Strain Rates
Space penetrators are a potential method of inserting instrumentation onto ice-covered bodies in the solar system. Part of a study to see whether this is feasible involves numerically simulating impact of the penetrator into ice at impact velocities of a few 100 m/s. In order to do this accurately, it is necessary to have a constitutive model for water ice that is valid at the strain rates and temperatures relevant to impact in the Outer Solar System. This paper reports certain issues and difficulties that arose during a study to obtain this data.We also thank QinetiQ plc for funding through the IRAD programme
Recommended from our members
Fragmentation and constitutive response of tailored mesostructured aluminum compacts
The fragmentation and constitutive response of aluminum-based compacts were examined under dynamic conditions using mesostructured powder compacts in which the interfaces between the powders (sizes of 40, 100, and 400 μm) were tailored during the swaging fabrication process. Fragmentation was induced in ring samples of this material through explosive loading and was examined through high speed photography, laser interferometry, and soft capture of fragments. Fragment velocities of around 100 m/s were recorded. The fragment mass distributions obtained correlated in general with the interfacial strength of the compacts as well as with the powder size. Experimental results are compared with fragmentation theories to characterize the behavior of reactive powders based on the material's mesostructure by introducing the fracture toughness of the compacts. The mean fragment size is calculated using a modified form of Mott's theory and successfully compared with experimental results.The authors gratefully acknowledge financial support provided by ONR/MURI Grant No. N00014-07-1-0740 (Program Officer Dr. Clifford Bedford). We acknowledge Prof. V. F. Nesterenko for the use of the high speed camera. Discussions with Dr. S. Walley at Cavendish Laboratory are gratefully acknowledged.This is the author accepted manuscript. It is currently under an indefinite embargo pending publication by AIP Publishing
Recommended from our members
Fragmentation and mechanical performance of tailored nickel-aluminum laminate compacts
The fragmentation of materials is a complex sequence of physical processes in which the kinetic energy is converted into deformation and fracture energy. The incorporation of reactive mixtures adds a third form of energy, chemical energy. The fragmentation and mechanical performance of nickel-aluminum compacts was examined under dynamic conditions using mesostructured powder compacts in which the interfaces between the powders (having initial sizes between 355 and 500 µm) were tailored during the swaging fabrication process. Fragmentation was created in ring samples of this material through explosively driven expansion (generating velocities around 100 m/s) and analyzed through high-speed photography, laser interferometry and soft capture of fragments. Quasi-static and dynamic mechanical testing was conducted to examine the mechanical performance and to provide parameters for the constitutive description. Experimental results are compared with fragmentation theories to characterize the behavior of reactive powders based on the material’s mesostructure by introducing the fracture toughness of the compacts, following the principal elements of the earlier work on tailored aluminum compacts. The fracture toughnesses, which ranged from 0.17 to 0.67 MPa m1/2, are related to the interfacial cohesion between particles and the fragmentation is a direct consequence of these parameters. The mean fragment size is calculated using a modified form of Mott’s theory and successfully compared with experimental results; it ranges from 10 µm to 40 µm. Finite element simulations on Al compacts confirm that the fragmentation increases (smaller fragment sizes) with a decrease in fracture toughness. The methodology developed here can be applied for tailoring the fragmentation of reactive munitions
Against Motivational Efficacy of Beliefs
Bromwich (2010) argues that a belief is motivationally efficacious in that, other things being equal, it disposes an agent to answer a question in accordance with that belief. I reply that what we are disposed to do is largely determined by our genes, whereas what we believe is largely determined by stimuli from the environment. We have a standing and default disposition to answer questions honestly, ceteris paribus, even before we are exposed to environmental stimuli. Since this standing and default disposition is innate, and our beliefs have their source in environmental stimuli, our beliefs cannot be the source of the disposition. Moreover, a recent finding in neuroscience suggests that motivation is extrinsic to belief
Implementing health research through academic and clinical partnerships : a realistic evaluation of the Collaborations for Leadership in Applied Health Research and Care (CLAHRC)
Background: The English National Health Service has made a major investment in nine partnerships between
higher education institutions and local health services called Collaborations for Leadership in Applied Health
Research and Care (CLAHRC). They have been funded to increase capacity and capability to produce and
implement research through sustained interactions between academics and health services. CLAHRCs provide a
natural ‘test bed’ for exploring questions about research implementation within a partnership model of delivery.
This protocol describes an externally funded evaluation that focuses on implementation mechanisms and
processes within three CLAHRCs. It seeks to uncover what works, for whom, how, and in what circumstances.
Design and methods: This study is a longitudinal three-phase, multi-method realistic evaluation, which
deliberately aims to explore the boundaries around knowledge use in context. The evaluation funder wishes to see
it conducted for the process of learning, not for judging performance. The study is underpinned by a conceptual
framework that combines the Promoting Action on Research Implementation in Health Services and Knowledge to
Action frameworks to reflect the complexities of implementation. Three participating CLARHCS will provide indepth
comparative case studies of research implementation using multiple data collection methods including
interviews, observation, documents, and publicly available data to test and refine hypotheses over four rounds of
data collection. We will test the wider applicability of emerging findings with a wider community using an
interpretative forum.
Discussion: The idea that collaboration between academics and services might lead to more applicable health
research that is actually used in practice is theoretically and intuitively appealing; however the evidence for it is
limited. Our evaluation is designed to capture the processes and impacts of collaborative approaches for
implementing research, and therefore should contribute to the evidence base about an increasingly popular (e.g.,
Mode two, integrated knowledge transfer, interactive research), but poorly understood approach to knowledge
translation. Additionally we hope to develop approaches for evaluating implementation processes and impacts
particularly with respect to integrated stakeholder involvement
- …