392 research outputs found
A new equipment for continuous measurement of methane production in a batch in vitro rumen system
A new rumen batch fermentation system that allows continuous measures of total gas (GP) and methane production (MP) was tested. The fermentation system is composed of glass bottles connected to gas counters (Ritter Apparatebau GmbH & Co. KG) and an infrared gas analyser that measures the methane concentration. The system allows direct and continuous measurement of GP and MP for accurate kinetic studies. The aim of the work was to test the rumen fermentation system and compare the GP and MP kinetics obtained. Barley meal (BM), alfalfa hay (AH), corn silage (CS), and soya bean hulls (SH) were used as substrates in four consecutive fermentation runs. Cumulative volumes of GP and MP and the percentage of methane on total GP were recorded continuously until 48 h and average values at 1 h intervals were fitted with an exponential model with a lag phase reaching a good fit (R2 > 0.992). GP and MP reached the highest plateau levels for SH (1836 and 370 ml, respectively; p < 0.01) and the lowest for AH (1000 and 233 ml, respectively). The remaining substrates showed intermediate values. MP kinetics showed a discrete lag phase (from 0.09 to 1.12 h), whereas it was equal to zero for the total GP (except for SH). The methane concentration in gas flowing increased rapidly at the beginning of fermentation (from 0.35 to 0.95 h−1) and reached a plateau after approximately 8–12 h. In conclusion, the rumen fermentation system evaluated generates methane data comparable to those reported in the literature and allows simple continuous measurement of methane release throughout fermentation
In vitro aflatoxins recovery after changing buffer or protozoa concentrations in the rumen fermentation fluid
This study simulates in vitro the effects of (i) rumen acidity and (ii) change in rumen protozoa numbers on the recovery of aflatoxins (AFs). Two 24-h fermentation experiments were carried out using the same batch in vitro fermentation systems and substrate (dried corn meal) containing 11.42, 2.42, 7.65 and 1.70 µg/kg of AFB1, AFB2, AFG1 and AFG2 respectively. In Experiment 1, two buffer concentrations (normal salts dosage or lowered to 25%) were tested. Buffer reduction decreased gas production (730 vs. 1101 mL, p < 0.05), volatile fatty acids (VFA) and NH3 concentrations in the fermentation liquid (39.8 vs. 46.3 mmol/L, and 31.7 vs. 46.5 mg/dL respectively, p < 0.01). Recovery of all four AFs types was higher (p < 0.01) in the reduced buffer fermentation fluid, both as a percentage of total AF incubated (73.6% vs. 62.5%, 45.9% vs. 38.1%, 33.6% vs. 17.9% and 18.9% vs. 6.24% for AFB1, AFB2, AFG1 and AFG2 respectively) and as amounts relative to VFA production (163.4 vs. 123.5, 22.1 vs. 15.7, 48.8 vs. 22.5 and 6.16 vs. 1.86 ng/100 mmol of VFA, for AFB1, AFB2, AFG1 and AFG2 respectively). In Experiment 2, Stevia rebaudiana Bertoni extracts (S) or a Camphor essential oil (Cam) were added to fermenters and compared to the control (no additives, C). S and Cam addition resulted in a 25% reduction (p < 0.05) and a 15% increase (p < 0.05) in protozoa counts respectively, when compared to C. Both plant additives slightly reduced (p < 0.05) AFB1 recovery as a percentage of total AFB1 incubated (68.5% and 67.7% vs. 74.9% for S, Cam and C respectively). Recoveries of all other AFs were unaffected by the additives. In conclusion, the rumen in vitro AFB1 recovery (63%–75%) was higher than other AFs (3%–46%) and the acidic fermentation environment increased it. In our conditions, changes in protozoa numbers did not affect AFs recovery
Relationships between population traits, nonstructural carbohydrates, and elevation in alpine stands of Vaccinium myrtillus
Premise: Despite great attention given to the relationship between plant growth and carbon balance in alpine tree species, little is known about shrubs at the treeline. We hypothesized that the pattern of main nonstructural carbohydrates (NSCs) across elevations depends on the interplay between phenotypic trait plasticity, plant\u2013plant interaction, and elevation. Methods: We studied the pattern of NSCs (i.e., glucose, fructose, sucrose, and starch) in alpine stands of Vaccinium myrtillus (above treeline) across an elevational gradient. In the same plots, we measured key growth traits (i.e., anatomical stem features) and shrub cover, evaluating putative relationships with NSCs. Results: Glucose content was positively related with altitude, but negatively related with shrub cover. Sucrose decreased at high altitude and in older populations and increased with higher percentage of vascular tissue. Starch content increased at middle and high elevations and in stands with high shrub cover. Moreover, starch content was negatively related with the number of xylem rings and the percentage of phloem tissue, but positively correlated with the percentage of xylem tissue. Conclusions: We found that the increase in carbon reserves across elevations was uncoupled from plant growth, supporting the growth limitation hypothesis, which postulates NSCs accumulate at high elevation as a consequence of low temperature. Moreover, the response of NSC content to the environmental stress caused by elevation was buffered by phenotypic plasticity of plant traits, suggesting that, under climate warming conditions, shrub expansion due to enhanced plant growth would be pronounced in old but sparse stands
Population traits shape the elevation effect on nonstructural carbohydrates (NSC) and lavonoids of Vaccinium myrtillus stands in Alpine tundra
Bioactive Polyphenols Modulate Enzymes Involved in Grapevine Pathogenesis and Chitinase Activity at Increasing Complexity Levels
The reduction of synthetic chemistry use in modern viticulture relies on either the biological control of microorganisms or the induction of pathogenesis-related proteins. In the present study, the effects of hydro-alcoholic plant extracts (PEs) (i.e., by-products of Vitis vinifera L., leaves of Olea europaea L. and Ailanthus altissima (Mill.) Swingle) were tested on purified enzymes activity involved in plant-pathogen interactions. The polyphenolic composition was assayed and analyzed to characterize the extract profiles. In addition, suspension cell cultures of grapevine were treated with PEs to study their modulation of chitinase activity. Application of grape marc\u2019s PE enhanced chitinase activity at 4 g L 121. Additionally, foliar treatment of grape marc\u2019s PE at two doses (4 g L 121
and 800 g L 121 ) on grapevine cuttings induced a concentration-dependent stimulation of chitinase activity. The obtained results showed that the application of bioactive compounds based on PEs, rich in phenolic compounds, was effective both at in vitro and ex/in vivo level. The overall effects
of PEs on plant-pathogen interaction were further discussed by applying a multi-criteria decision analysis, showing that grape marc was the most effective extrac
Preprocesamiento alternativo de imágenes 3D de MRA
En los últimos años el avance de los sistemas de cómputo han permitido un sustancial progreso en las aplicaciones del procesamiento digital de imágenes. Este avance se refleja especialmente en el grado de mejoramiento de las imágenes de tomografía axial computada, ecografía y resonancia magnética nuclear.
Una aplicación interesante del procesamiento de imágenes es la identificación del estrechamiento en los vasos. Particularmente en el registro de imágenes mediante MRA se requiere el realce de las imágenes para visualizar nítidamente vasos pequeños. En este marco, se han propuesto trabajos que usan como pre-procesamiento el máximo local medio (LMM) para aumentar la detectabilidad de vasos pequeños. A cada dato correspondiente a un voxel en el volumen original tridimensional (3- D), se aplica el LMM a una línea en el cubo centrada en el voxel de interes y se forma el juego de datos 3-D LMM. A los datos 3-D LMM se le aplica la proyección de máxima intensidad (MIP) para producir la imagen bidimensional (2-D) LMM-MIP que aumenta la detectabilidad de vasos pequeños. En este contexto se propone una modificación de los algoritmos de LMM empleando la mediana en el pre-procesamientoIII Workshop de Computación Gráfica, Imágenes y Visualización (WCGIV)Red de Universidades con Carreras en Informática (RedUNCI
Preprocesamiento alternativo de imágenes 3D de MRA
En los últimos años el avance de los sistemas de cómputo han permitido un sustancial progreso en las aplicaciones del procesamiento digital de imágenes. Este avance se refleja especialmente en el grado de mejoramiento de las imágenes de tomografía axial computada, ecografía y resonancia magnética nuclear.
Una aplicación interesante del procesamiento de imágenes es la identificación del estrechamiento en los vasos. Particularmente en el registro de imágenes mediante MRA se requiere el realce de las imágenes para visualizar nítidamente vasos pequeños. En este marco, se han propuesto trabajos que usan como pre-procesamiento el máximo local medio (LMM) para aumentar la detectabilidad de vasos pequeños. A cada dato correspondiente a un voxel en el volumen original tridimensional (3- D), se aplica el LMM a una línea en el cubo centrada en el voxel de interes y se forma el juego de datos 3-D LMM. A los datos 3-D LMM se le aplica la proyección de máxima intensidad (MIP) para producir la imagen bidimensional (2-D) LMM-MIP que aumenta la detectabilidad de vasos pequeños. En este contexto se propone una modificación de los algoritmos de LMM empleando la mediana en el pre-procesamientoIII Workshop de Computación Gráfica, Imágenes y Visualización (WCGIV)Red de Universidades con Carreras en Informática (RedUNCI
System-Size Independence of Directed Flow Measured at the BNL Relativistic Heavy-Ion Collider
We measure directed flow (ν_1) for charged particles in Au+Au and Cu+Cu collisions at √S_(NN)=200 and 62.4 GeV, as a function of pseudorapidity (η), transverse momentum (p_t), and collision centrality, based on data from the STAR experiment. We find that the directed flow depends on the incident energy but, contrary to all available model implementations, not on the size of the colliding system at a given centrality. We extend the validity of the limiting fragmentation concept to ν_1 in different collision systems, and investigate possible explanations for the observed sign change in ν_1(p_t)
Spin alignment measurements of the and vector mesons at RHIC
We present the first spin alignment measurements for the and
vector mesons produced at mid-rapidity with transverse momenta up
to 5 GeV/c at = 200 GeV at RHIC. The diagonal spin density
matrix elements with respect to the reaction plane in Au+Au collisions are
= 0.32 0.04 (stat) 0.09 (syst) for the
( GeV/c) and = 0.34 0.02 (stat) 0.03
(syst) for the ( GeV/c), and are constant with transverse
momentum and collision centrality. The data are consistent with the unpolarized
expectation of 1/3 and thus no evidence is found for the transfer of the
orbital angular momentum of the colliding system to the vector meson spins.
Spin alignments for and in Au+Au collisions were also measured
with respect to the particle's production plane. The result,
= 0.41 0.02 (stat) 0.04 (syst), is consistent with that in p+p
collisions, = 0.39 0.03 (stat) 0.06 (syst), also
measured in this work. The measurements thus constrain the possible size of
polarization phenomena in the production dynamics of vector mesons.Comment: 7 pages, 4 figures. fig.1 updated; one more reference added, one typo
corrected, published in PRC.77.06190
Measurements of meson production in relativistic heavy-ion collisions at RHIC
We present results for the measurement of meson production via its
charged kaon decay channel in Au+Au collisions at
, 130, and 200 GeV, and in and +Au collisions
at GeV from the STAR experiment at the BNL Relativistic
Heavy Ion Collider (RHIC). The midrapidity () meson transverse
momentum () spectra in central Au+Au collisions are found to be well
described by a single exponential distribution. On the other hand, the
spectra from , +Au and peripheral Au+Au collisions show power-law tails
at intermediate and high and are described better by Levy
distributions. The constant yield ratio vs beam species, collision
centrality and colliding energy is in contradiction with expectations from
models having kaon coalescence as the dominant mechanism for production
at RHIC. The yield ratio as a function of is consistent
with a model based on the recombination of thermal quarks up to GeV/, but disagrees at higher transverse momenta. The measured nuclear
modification factor, , for the meson increases above unity at
intermediate , similar to that for pions and protons, while is
suppressed due to the energy loss effect in central Au+Au collisions. Number of
constituent quark scaling of both and for the meson
with respect to other hadrons in Au+Au collisions at =200 GeV
at intermediate is observed. These observations support quark
coalescence as being the dominant mechanism of hadronization in the
intermediate region at RHIC.Comment: 22 pages, 21 figures, 4 table
- …