A Kucha\v{r} Hypertime Formalism For Cylindrically Symmetric Spacetimes With Interacting Scalar Fields

The Kucha\v{r} canonical transformation for vacuum geometrodynamics in the presence of cylindrical symmetry is applied to a general non-vacuum case. The resulting constraints are highly non-linear and non-local in the momenta conjugate to the Kucha\v{r} embedding variables. However, it is demonstrated that the constraints can be solved for these momenta and thus the dynamics of cylindrically symmetric models can be cast in a form suitable for the construction of a hypertime functional Schr\"odinger equation.Comment: 5 pages, LaTeX, UBCTP-93-02

Seismic tomographic imaging of the Eastern Mediterranean Mantle: Implications for terminal-stage subduction, the uplift of Anatolia, and the development of the North Anatolian Fault

The Eastern Mediterranean captures the eastwest transition from active subduction of Earth'soldest oceanic lithosphere to continental collision, making it an ideal location to study terminalstagesubduction. Asthenospheric or subductionrelated processes are the main candidates for the region's ∼2kmuplift and Miocene volcanism; however, their relative importance is debated. To address these issues, wepresent new P and S wave relative arrivaltime tomographic models that reveal fast anomalies associatedwith an intact Aegean slab in the west, progressing to a fragmented, partially continental, Cyprean slabbelow central Anatolia. We resolve a gap between the Aegean and Cyprean slabs, and a horizontal tear in theCyprean slab below the Central Anatolian Volcanic Province. Below eastern Anatolia, the completelydetached “Bitlis” slab is characterized by fast wave speeds at ∼500 km depth. Assuming slab sinkingrates mirror ArabiaAnatolia convergence rates, the Bitlis slab's location indicates an Oligocene (∼26 Ma)breakoff. Results further reveal a strong velocity contrast across the North Anatolian Fault likelyrepresenting a 40–60 km decrease in lithospheric thickness from the Precambrian lithosphere north of thefault to a thinned Anatolian lithosphere in the south. Slow uppermostmantle wave speeds below activevolcanoes in eastern Anatolia, and ratios of P to S wave relative traveltimes, indicate a thin lithosphere andmelt contributions. Positive central and eastern Anatolian residual topography requires additional supportfrom hot/buoyant asthenosphere to maintain the 1–2 km elevation in addition to an almost absentlithospheric mantle. Smallscale fast velocity structures in the shallow mantle above the Bitlis slab maytherefore be drips of Anatolian lithospheric mantle

Management of tuberculosis by healthcare practitioners in Pakistan: A systematic review

Objective: To assess the quality of tuberculosis (TB) care in Pakistan, through determining comparison of healthcare practitioners’ knowledge and practices to national and international TB care guidelines. Methods: Studies reporting on knowledge, attitudes and practices of public and private practitioners with TB patients were selected through searching electronic databases and grey literature. Findings: Of 1458 reports, 20 full-texts were assessed, of which 11 met the eligibility and quality criteria; all studies focused on private sector care. Heterogeneity precluded meta-analysis. In 3 of 4 studies, over 50% of practitioners correctly identified a cough as the main TB symptom. However, 4 out of 6 studies showed practitioners’ compliance to be low (under 50%) for the use of sputum microscopy in diagnosis. The poorest quality care occurred in the later stages of treatment, with low compliance in prescribing practices for continuation-phase care and in monitoring and recording treatment progress, the latter of which is particularly critical for treatment success. Conclusion: TB care was variable and generally inadequate, with both a lack of knowledge and a small ‘know-do’ gap evident—practitioners did not use methods that they know they should use. A lack of recent evidence found suggests that the quality of current practices may not be fully captured and further research is needed, especially on non-allopathic, rural and public-sector contexts. Improved training of practitioners, greater availability of recommended diagnostic tools and expansion of public-private partnerships are suggestions for improving the quality of TB care in Pakistan

Somewhere in Europe (1947): locating Hungary within a shifting geopolitical landscape

Somewhere in Europe/Valahol Európában (Radványi, 1947) was one of the first films made in Hungary after 1945. Financed by the Hungarian Communist Party (MKP), it loudly proclaimed a broad European pertinence in an effort to privilege the universal narrative of childhoods disrupted by the war over narrowly national political concerns. The film’s story of a gang of half-starved children battling for survival in a bombed-out Central European landscape places it squarely within a transnational post-war film-making tradition. Similarities with both Italian neorealism and Soviet socialist realist cinema indicate a shared European experience of the war, but is also attributable to the international training and experience of the film’s personnel. The director Radványi had worked in the Italian industry, while the scriptwriter was the well-known film theorist Béla Balázs, who had worked in Weimar Germany and Soviet Russia. This article argues that in spite of its ostensible commitment to a communist and humanist ideology, the film gives an insight into the Hungarian national obsession with territorial integrity. Hungary’s participation in World War II on the side of the Axis, and its position as a defeated nation under Allied occupation, are seen to complicate the film text. This article contends that in spite its transnational flavour, the film’s focus on lost children wandering a borderless Europe suggests a preoccupation with the country’s uncertain position within a shifting geopolitical landscape. In turn, the film’s official reading by Nemeskürty shows an eagerness to accept the film’s representation of Hungary as a blameless victim of the war, and gives evidence of a need to insert a (false) break between the country’s wartime past as a member of the Axis, and the country’s 1968 present as a member of the Communist world order

An innovative solution for earthquake resistance hybrid steel –concrete systems with replaceable dissipative steel links

In this work innovative hybrid coupled shear walls (HCSW) are considered, their design is discussed, their efficiency and limitations evaluated by means of nonlinear static (pushover) analysis. Different numbers of storeys, wall geometries and design assumptions are studied in order to give an overview of situations of interest in European seismic prone areas. The design of an experimental test regarding the performance of the connection of a seismic link embedded in a concrete shear wall is presented. This study is part of a larger research project named INNO-HYCO (INNOvative HYbrid and COmposite steel-concrete structural solutions for building in seismic area) funded by the European Commission

A comparison of three data-poor stock assessment methods for the pink spiny lobster fishery in Mauritania

Several data-poor stock assessment methods have recently been proposed and applied to data-poor fisheries around the world. The Mauritanian pink spiny lobster fishery has a long history of boom and bust dynamics, with large landings, stock collapse, and years-long fishery closures, all happening several times. In this study, we have used catch, fishing efforts, and length-frequency data (LFD) obtained from the fishery in its most recent period of activity, 2015–2019, and historical annual catch records starting in 2006 to fit three data-poor stock assessment methods. These were the length-based Bayesian (LBB) method, which uses LFD exclusively, the Catch-only MSY (CMSY) method, using annual catch data and assumptions about stock resilience, and generalised depletion models in the R package CatDyn combined with Pella-Tomlinson biomass dynamics in a hierarchical inference framework. All threemethods presented the stock as overfished. The LBB method produced results that were very pessimistic about stock status but whose reliability was affected by non-constant recruitment. The CMSY method and the hierarchical combination of depletion and Pella-Tomlinson biomass dynamics produced more comparable results, such as similar sustainable harvest rates, but both were affected by large statistical uncertainty. Pella-Tomlinson dynamics in particular demonstrated stock experiencing wide fluctuations in abundance. In spite of uncertain estimates, a clear understanding of the status of the stock as overfished and in need of a biomass rebuilding program emerged as management-useful guidance to steer exploitation of this economically significant resource into sustainability.info:eu-repo/semantics/publishedVersio

Microstructural And Mechanical Study of The Al-20Sn (MASS%) Alloy Processed By Equal-Channel Angular Pressing By Route C

In this work, the feasibility of an Al–20Sn (mass%) alloy to improve its mechanical properties through the Equal Channel Angular Pressing (ECAP) process is presented and discussed. Al–20Sn (mass%) alloy samples with a square section of 16 × 16 mm and a length of 100 mm were subjected to the ECAP process through route C (i.e., rotation of 180 degrees between each pass). The characterization of the samples was carried out using X-ray diffraction and the sin^2(ψ) method for residual stresses. Scanning Electron Microscopy (SEM) was used to analyze the morphology and grain size. Vickers microhardness was carried out to analyze the homogeneity of the states of deformation and tensile testing to evaluate the yield strength, ultimate tensile strength and elongation. The results showed that the residual stresses were relatively low, confirming the effect of Sn as stress reliever. The grain size was refined to a sub-micron scale and a ribbon-like morphology was observed. The microhardness values of the severely deformed samples showed a significant increase when compared to the as-cast sample. The tensile tests showed an increase in the yield strength after the first pass, that doubled the yield strength of the as cast sample. A marginal increase in the yield strength after the fifth pass was observed; whilst the ductility remained very similar from 1 to 5 passes.In this work, the feasibility of an Al–20Sn (mass%) alloy to improve its mechanical properties through the Equal Channel Angular Pressing (ECAP) process is presented and discussed. Al–20Sn (mass%) alloy samples with a square section of 16 × 16 mm and a length of 100 mm were subjected to the ECAP process through route C (i.e., rotation of 180 degrees between each pass). The characterization of the samples was carried out using X-ray diffraction and the sin^2(ψ) method for residual stresses. Scanning Electron Microscopy (SEM) was used to analyze the morphology and grain size. Vickers microhardness was carried out to analyze the homogeneity of the states of deformation and tensile testing to evaluate the yield strength, ultimate tensile strength and elongation. The results showed that the residual stresses were relatively low, confirming the effect of Sn as stress reliever. The grain size was refined to a sub-micron scale and a ribbon-like morphology was observed. The microhardness values of the severely deformed samples showed a significant increase when compared to the as-cast sample. The tensile tests showed an increase in the yield strength after the first pass, that doubled the yield strength of the as cast sample. A marginal increase in the yield strength after the fifth pass was observed; whilst the ductility remained very similar from 1 to 5 passes

Deformation heterogeneity study of a 6061-T6 aluminum alloy processed by equal channel angular pressing

Among the severe plastic deformation techniques, the equal channel angular pressing (ECAP) has drastically improved the mechanical properties of the processed alloys. However, information regarding friction phenomenon, which modifies the deformation at the surface and the heterogeneity microstrain state produced by the process itself, is still scarce. In the present work, the deformation heterogeneity and the friction effect, at the surface in the bulk material of the 6061-T6 aluminum alloy processed by ECAP, is presented and discussed. The residual stress (RS) measurements were performed by means of X-Ray diffraction. By means of synchrotron diffraction, volumetric sections of the ECAPed samples were characterized. Finite element analysis showed a good agreement with the experimentally obtained residual stress and microhardness mapping results. The study also showed that the highest deformation zones were located at the outer parts of the deformed samples (top and bottom), while the inner zone showed strain oscillations of up to 49±2 MPa.Peer ReviewedPostprint (author's final draft

Microstructural evolution and mechanical behavior of an Al-6061 alloy processed by repetitive corrugation and straightening

The repetitive corrugation and straightening process is a severe plastic deformation technique that is particularly suited to process metallic sheets. With this technique, it is possible to develop nano/ultrafine-grained structured materials, and therefore, to improve some mechanical properties such as the yield strength, ultimate tensile strength, and fatigue lifetime. In this study, an Al-6061 alloy was subjected to the repetitive corrugation and straightening process. A new corrugation die design was proposed in order to promote a heterogeneous deformation into the metallic sheet. The evolution of the mechanical properties and microstructure obtained by electron backscatter diffraction of the alloy showed a heterogeneous distribution in the grain size at the initial cycles of the repetitive corrugation and straightening process. Uniaxial tensile tests showed a significant increase in yield strength as the number of repetitive corrugation and straightening passes increased. The distribution of the plastic deformation was correlated with the hardness distribution on the surface. The hardness distribution map matched well with the heterogeneous distribution of the plastic deformation obtained by finite element simulation. A maximum average hardness (147 HV) and yield strength (385 MPa) was obtained for two repetitive corrugation and straightening cycles samplePeer ReviewedPostprint (published version

Genome sequences of six Phytophthora species threatening forest ecosystems

AbstractThe Phytophthora genus comprises of some of the most destructive plant pathogens and attack a wide range of hosts including economically valuable tree species, both angiosperm and gymnosperm. Many known species of Phytophthora are invasive and have been introduced through nursery and agricultural trade. As part of a larger project aimed at utilizing genomic data for forest disease diagnostics, pathogen detection and monitoring (The TAIGA project: Tree Aggressors Identification using Genomic Approaches; http://taigaforesthealth.com/), we sequenced the genomes of six important Phytophthora species that are important invasive pathogens of trees and a serious threat to the international trade of forest products. This genomic data was used to develop highly sensitive and specific detection assays and for genome comparisons and to make evolutionary inferences and will be useful to the broader plant and tree health community. These WGS data have been deposited in the International Nucleotide Sequence Database Collaboration (DDBJ/ENA/GenBank) under the accession numbers AUPN01000000, AUVH01000000, AUWJ02000000, AUUF02000000, AWVV02000000 and AWVW02000000