Optically controlled resonance energy transfer:Mechanism and configuration for all-optical switching

In a molecular system of energy donors and acceptors, resonance energy transfer is the primary mechanism by means of which electronic energy is redistributed between molecules, following the excitation of a donor. Given a suitable geometric configuration it is possible to completely inhibit this energy transfer in such a way that it can only be activated by application of an off-resonant laser beam: this is the principle of optically controlled resonance energy transfer, the basis for an all-optical switch. This paper begins with an investigation of optically controlled energy transfer between a single donor and acceptor molecule, identifying the symmetry and structural constraints and analyzing in detail the dependence on molecular energy level positioning. Spatially correlated donor and acceptor arrays with linear, square, and hexagonally structured arrangements are then assessed as potential configurations for all-optical switching. Built on quantum electrodynamical principles the concept of transfer fidelity, a parameter quantifying the efficiency of energy transportation, is introduced and defined. Results are explored by employing numerical simulations and graphical analysis. Finally, a discussion focuses on the advantages of such energy transfer based processes over all-optical switching of other proposed forms. © 2008 American Institute of Physics

Identification of putative regulatory signals including the HAP1 binding site in the upstream sequence of the Aspergillus nidulans cytochrome c gene (cycA).

We speculate that a HAP1-like protein, similar to those which regulate oxygen transcriptional activation of many yeast respiratory genes, will probably also regulate the A. nidulans cytochrome c (cycA) gene. As part of a study to investigate the significance of a putative HAP1 (Haem Activator Protein) binding site in the regulatory region of the cycA gene, routine sequencing revealed an error in the published sequence (Raitt et al. 1994 Mol. Gen. Genet. 242: 17-22). Examination of the corrected sequence, including RT-PCR analysis of cycA mRNA, showed that an extra intron was present, and that the published translational start site was incorrect. This meant that the putative HAP1-binding site proposed by Raitt et al. could not be a regulatory element. However, further sequence analysis of the upstream sequence of the corrected cycA gene revealed putative regulatory signals, including possible HAP1 binding sites which are a closer match to recently reported yeast consensus sequences (Ha et al. 1996 Nucl. Acids Res. 24: 1453-1459)

Laser-controlled fluorescence in two-level systems

The ability to modify the character of fluorescent emission by a laser-controlled, optically nonlinear process has recently been shown theoretically feasible, and several possible applications have already been identified. In operation, a pulse of off-resonant probe laser beam, of sufficient intensity, is applied to a system exhibiting fluorescence, during the interval of excited- state decay following the initial excitation. The result is a rate of decay that can be controllably modified, the associated changes in fluorescence behavior affording new, chemically specific information. In this paper, a two-level emission model is employed in the further analysis of this all-optical process; the results should prove especially relevant to the analysis and imaging of physical systems employing fluorescent markers, these ranging from quantum dots to green fluorescence protein. Expressions are presented for the laser-controlled fluorescence anisotropy exhibited by samples in which the fluorophores are randomly oriented. It is also shown that, in systems with suitably configured electronic levels and symmetry properties, fluorescence emission can be produced from energy levels that would normally decay nonradiatively. © 2010 American Chemical Society

Quantum channels in nonlinear optical processes

Quantum electrodynamics furnishes a new type of representation for the characterisation of nonlinear optical processes. The treatment elicits the detailed role and interplay of specific quantum channels, information that is not afforded by other methods. Following an illustrative application to the case of Rayleigh scattering, the method is applied to second and third harmonic generation. Derivations are given of parameters that quantify the various quantum channels and their interferences; the results are illustrated graphically. With given examples, it is shown in some systems that optical nonlinearity owes its origin to an isolated channel, or a small group of channels. © 2009 World Scientific Publishing Company

Women's experiences of participating in a randomised trial comparing alternative policies for timing of cord clamping at very preterm birth: a questionnaire study

BACKGROUND: The Cord Pilot Trial compared two alternative policies for cord-clamping at very preterm birth at eight UK tertiary maternity units: clamping after at least 2 min and immediate neonatal care with cord intact, or clamping within 20 s and neonatal care after clamping. This paper reports views and experiences of the women who participated in the trial (261 randomised), based on data from two self-completed questionnaires. METHODS: Women were given or posted the first questionnaire between 4 and 8 weeks after birth, and posted a second similar questionnaire at 1 year. Both questionnaires included three questions about experiences of participating in the trial: (1) If time suddenly went backwards and you had to do it all over again, would you agree to participate in the Cord Pilot Trial?; (2) Please tell us if there was anything about the Cord Pilot Trial that you think could have been done better; and (3) Please tell us if there was anything about the Cord Pilot Trial, or your experiences of joining the trial, that you think were particularly good. RESULTS: One hundred and eighty-six women completed the first questionnaire and 133 completed the second. At both time points, 90% responded 'probably' or 'definitely' to participating in the trial again. More women randomised to deferred clamping responded 'definitely yes' than those allocated immediate clamping (78% versus 67% first questionnaire). Women were positive about the level of information and explanations, the friendly and caring staff, and the benefits for their baby and others as a result of participating in the trial. Suggestions for how the trial could be done better included being approached earlier, better staff communication about the trial, more information overall, and better timing of follow-up. CONCLUSIONS: Women were largely positive about participating in the trial. Nevertheless, they had suggestions for how the study could have been improved. These suggestions have implications for the design of future trials. TRIAL REGISTRATION: ISRCTN21456601 . Registered on 28 February 2013

Cord pilot trial, comparing alternative policies for timing of cord clamping before 32 weeks gestation: follow-up for women up to one year.

BACKGROUND: The Cord Pilot Trial compared two alternative policies for cord clamping at very preterm birth at eight UK maternity units: clamping after at least 2 min and immediate neonatal care (if needed) with cord intact, or clamping within 20 s and neonatal care after clamping. This paper reports follow-up of the women by two self-completed questionnaires up to one year after the birth. METHODS: Women were given or posted the first questionnaire between four and eight weeks after birth, usually before their baby was discharged, and were posted a second similar questionnaire at one year. The questionnaire included the Hospital Anxiety and Depression Scale; the Preterm Birth Experience and Satisfaction Scale (P-BESS) and questions about their baby's feeding. RESULTS: Of 261 women randomised (132 clamping ≥2 min, 129 clamping ≤20 s), six were excluded as birth was after 35+ 6 weeks (2, 4 in each group respectively). Six were not sent either questionnaire. The first questionnaire was given/sent to 244 and returned by 186 (76%) (79, 74%). The second, at one year, was sent to 242 and returned by 133 (55%) (66, 43%). On the first questionnaire, 89 (49%) had a score suggestive of an anxiety disorder, and 55 (30%) had a score suggestive of depression. Satisfaction with care at birth was high: median total P-BESS score 77 [interquartile range 68 to 84] (scale 17 to 85). There was no clear difference in anxiety, depression, or satisfaction with care between the two allocated groups. The median number of weeks after birth women breastfed/expressed was 16 (95% confidence interval (CI) 13 to 20, n = 119) for those allocated clamping ≥2 min and 12 (95% CI 11 to 16, n = 103) for those allocated clamping ≤20 s. CONCLUSIONS: The response rate was higher for the earlier questionnaire than at one year. A high proportion of women reported symptoms of anxiety or depression, however there were no clear differences between the allocated groups. Most women reported that they had breastfed or expressed milk and those allocated deferred cord clamping reported continuing this for slightly longer. TRIAL REGISTRATION: ISRCTN 21456601, registered 28th February 2013, http://www.isrctn.com/ISRCTN21456601

Direct generation of optical vortices

A detailed scheme is established for the direct generation of optical vortices, signifying light endowed with orbital angular momentum. In contrast to common techniques based on the tailored conversion of the wave front in a conventional beam, this method provides for the direct spontaneous emission of photons with the requisite field structure. This form of optical emission results directly from the electronic relaxation of a delocalized exciton state that is supported by a ringlike array of three or more nanoscale chromophores. An analysis of the conditions leads to a general formulation revealing a requirement for the array structure to adhere to one of a restricted set of permissible symmetry groups. It is shown that the coupling between chromophores within each array leads to an energy level splitting of the exciton structure, thus providing for a specific linking of exciton phase and emission wavelength. For emission, arrays conforming to one of the given point-group families’ doubly degenerate excitons exhibit the specific phase characteristics necessary to support vortex emission. The highest order of exciton symmetry, corresponding to the maximum magnitude of electronic orbital angular momentum supported by the ring, provides for the most favored emission. The phase properties of the emission produced by the relaxation of such excitons are exhibited on plots which reveal the azimuthal phase progression around the ring, consistent with vortex emission. It is proven that emission of this kind produces electromagnetic fields that map with complete fidelity onto the phase structure of a Laguerre-Gaussian optical mode with the corresponding topological charge. The prospect of direct generation paves the way for practicable devices that need no longer rely on the modification of a conventional laser beam by a secondary optical element. Moreover, these principles hold promise for the development of a vortex laser, also based on nanoscale exciton decay, enabling the production of coherent radiation with a tailor-made helical wave front

Accuracy of temperature measurements with the VACM

For the past five years the Buoy Group at Woods Hole Oceanographic Institution has included temperature as one of the variables recorded in its current meters. These measurements began with the first successful deployments of Vector Averaging Current Meters (VACMs) in 1971. Circuitry designed for making highly accurate temperature measurements has been included in all the Buoy Project's VACMs. During the past year we have begun to add similar circuitry to the EG&G 850 current meters. This report is intended to describe what we have learned about making water temperature measurements with VACMs.Prepared for the Office of Naval Research under Contract N00014-76-C-0197; NR 083-400

Adsorbate site determination with the scanning tunneling microscope: C₂H₄ on Cu{110}

Scanning tunneling microscopy at T=4 K has been used to determine directly the binding site of a molecule chemisorbed on a metal surface, namely, ethene on Cu〈110〉, by simultaneous imaging of the adsorbate and the underlying lattice. The molecule is found to bond in the short bridge site on the close-packed rows with its C-C axis oriented in the 〈110〉 direction

Response of Pemphigus betae (Hemiptera: Aphididae) and Beneficial Epigeal Arthropod Communities to Sugarbeet Plant Density and Seed-Applied Insecticide in Western Nebraska

Published ArticleThis study investigated the impact of a neonicotinoid seed-applied insecticide (Poncho Beta) and two plant densities (86,487 and 61,776 plants per hectare) on the sugarbeet root aphid (Pemphigus betae Doane), beneficial epigeal arthropods, and selected crop yield parameters in sugarbeet (Beta vulgaris L. var. vulgaris). Ground beetles and centipedes were the most commonly collected taxa during 2012 and 2013, respectively. Centipede, spider, and rove beetle activity densities were not affected by the seed-applied insecticide, whereas plant density had a marginal effect on centipede activity density during 2012. Ground beetle species richness, diversity, and evenness were also not impacted by the seed treatments. However, during 2013, ground beetle activity density was significantly higher in plots planted with untreated sugarbeet seeds due to the abundance of Bembidion quadrimaculatum oppositum Say. Sugarbeet root aphid populations were significantly higher in the untreated plots during both years. In 2012, sugarbeet tonnage and sugar yield were higher under the low plant density treatment, while higher sugar content was recorded from the seed-applied insecticide plots (2013). Seed-applied neonicotinoids and plant density had little impact on beneficial epigeal arthropod activity density. Seed treatment did result in decreased root aphid populations; however, these reductions were not sufficient to be considered as an adequate control. This limited aphid control likely contributed to inconsistent effects on yield parameters