Si-HPMC hydrogel combining CaCO3 microparticles as hybrid biomaterial for bone and cartilage tissue engineering

National audienc

PLA scaffolds production from Thermally Induced Phase Separation: effect of process parameters and development of an environmentally improved route assisted by supercritical carbon dioxide

In this work, a relatively large scale of PLA scaffolds was produced using thermally induced phase separation (TIPS) combined with a supercritical carbon dioxide (SC-CO2) drying step as a green alternative. For the TIPS step, the phase separation of PLA and 1,4-dioxane solvent was controlled by adjusting the process conditions such as the polymer concentration and molecular weight, the 1,4-dioxane solvent power and the cooling conditions. The scaffolds morphology was analyzed by scanning electron microscopy. Their structural and mechanical properties were correlated together with the possibility to tune them by controlling the process conditions. An environmental analysis using the Life Cycle Assessment (LCA) methodology confirmed a reduction of at least 50% of the environmental impact of the whole process using the SC-CO2 drying compared to the traditional freeze-drying technology. This work is the first known attempt to conduct the LCA methodology on TIPS process for the PLA scaffolds production

Hyaluronic Acid Scaffolds for Loco-Regional Therapy in Nervous System Related Disorders

Hyaluronic acid (HA) is a Glycosaminoglycan made of disaccharide units containing N-acetyl-D-glucosamine and glucuronic acid. Its molecular mass can reach 10 MDa and its physiological properties depend on its polymeric property, polyelectrolyte feature and viscous nature. HA is a ubiquitous compound found in almost all biological tissues and fluids. So far, HA grades are produced by biotechnology processes, while in the human organism it is a major component of the extracellular matrix (ECM) in brain tissue, synovial fluid, vitreous humor, cartilage and skin. Indeed, HA is capable of forming hydrogels, polymer crosslinked networks that are very hygroscopic. Based on these considerations, we propose an overview of HA-based scaffolds developed for brain cancer treatment, central and peripheral nervous systems, discuss their relevance and identify the most successful developed systems

Self-assembled monolayers of bisphosphonates: Influence of side chain steric hindrance

Bisphosphonates form self-assembled monolayers (SAMs) spontaneously on stainless steel, silicon, and titanium oxidized surfaces. We used contact angle measurements, atomic force microscopy, and X-ray reflectivity analysis to study the formation of SAMs on a model surface of ultraflat titanium (rms=0.2 nm). The results were extended to standard materials (mechanically polished titanium, stainless steel, and silicon) and showed that water-soluble bisphosphonic perfluoropolyether can easily form SAMs, with 100% surface coverage and a layer thickness of less than 3 nm. Hydrophobic (water contact angle >110° on stainless steel or titanium) and lipophobic (methylene iodide contact angle >105° on titanium) properties are discussed in terms of industrial applications

Dehydration of Alginic Acid Cryogel by TiCl4 vapor : Direct Access to Mesoporous TiO2@C Nanocomposites and Their Performance in Lithium-Ion Batteries

A new strategy for the synthesis of mesoporous TiO2@C nanocomposites through the direct mineralization of seaweed-derived alginic acid cryogel by TiCl4 through a solid/vapor reaction pathway is presented. In this synthesis, alginic acid cryogel can have multiple roles; i) mesoporous template, ii) carbon source, and iii) oxygen source for the TiO2 precursor, TiCl4. The resulting TiO2@alginic acid composite was transformed either into pure mesoporous TiO2 by calcination or into mesoporous TiO2@C nanocomposites by pyrolysis. By comparing with a nonporous TiO2@C composite, the importance of the mesopores on the performance of electrodes for lithium-ion batteries based on mesoporous TiO2@C composite was clearly evidenced. In addition, the carbon matrix in the mesoporous TiO2@C nanocomposite also showed electrochemical activity versus lithium ions, providing twice the capacity of pure mesoporous TiO2 or alginic acid-derived mesoporous carbon (A600). Given the simplicity and environmental friendliness of the process, the mesoporous TiO2@C nanocomposite could satisfy the main prerequisites of green and sustainable chemistry while showing improved electrochemical performance as a negative electrode for lithium-ion batteries

Optimization of an Injectable Hydrogel Depot System for the Controlled Release of Retinal-Targeted Hybrid Nanoparticles

A drawback in the development of treatments that can reach the retina is the presence of barriers in the eye that restrain compounds from reaching the target. Intravitreal injections hold promise for retinal delivery, but the natural defenses in the vitreous can rapidly degrade or eliminate therapeutic molecules. Injectable hydrogel implants, which act as a reservoir, can allow for long-term drug delivery with a single injection into the eye, but still suffer due to the fast clearance of the released drugs when traversing the vitreous and random diffusion that leads to lower pharmaceutic efficacy. A combination with HA-covered nanoparticles, which can be released from the gel and more readily pass through the vitreous to increase the delivery of therapeutic agents to the retina, represents an advanced and elegant way to overcome some of the limitations in eye drug delivery. In this article, we developed hybrid PLGA-Dotap NPs that, due to their hyaluronic acid coating, can improve in vivo distribution throughout the vitreous and delivery to retinal cells. Moreover, a hydrogel implant was developed to act as a depot for the hybrid NPs to better control and slow their release. These results are a first step to improve the treatment of retinal diseases by protecting and transporting the therapeutic treatment across the vitreous and to improve treatment options by creating a depot system for long-term treatments

Si-HPMC hydrogel reinforcement using nano or micro particles

International audienc

Development of an eco-friendly Thermal Induced Phase Separation (TIPS) process assisted by supercritical CO2 for the production of PLA scaffolds with tunable structural and mechanical properties

Many routes are nowadays utilized for the production of PLA scaffolds. In this study, a relative large scale of scaffolds was produced combining thermal induced phase separation and supercritical CO2 as a green alternative drying. The phase separation between polylactic acid and 1,4-dioxane was monitored by adjusting the process parameters such as the polymer concentration, the molecular weight, the solvent power and the cooling conditions. The morphologic changes occurring during the phase separation were analyzed by scanning electron microscopy. Structural and mechanical properties of scaffolds were correlated and it was possible to tune them depending on the process parameters. Moreover, an environmental analysis of the thermal induced phase separation (TIPS) process and the comparison between supercritical CO2 and the traditional freeze drying technologies were investigated. This work is the first known attempt to conduct the life cycle assessment (LCA) methodology on TIPS process and the polylactic acid scaffolds production. The results of the LCA have demonstrated that using supercritical-CO2 drying technology allows to reduce by at least 50 % the environmental impact of the whole process and to drastically diminish the production time

Potential model of a 2D Bunsen flame

The Michelson Sivashinsky equation, which models the non linear dynamics of premixed flames, has been recently extended to describe oblique flames. This approach was extremely successful to describe the behavior on one side of the flame, but some qualitative effects involving the interaction of both sides of the front were left unexplained. We use here a potential flow model, first introduced by Frankel, to study numerically this configuration. Furthermore, this approach allows us to provide a physical explanation of the phenomena occuring in this geometry by means of an electrostatic analogy