Improving the Performance of SDM-EON Through Demand Prioritization: A Comprehensive Analysis

This paper studies the impact of demand-prioritization on Space-Division Multiplexing Elastic Optical Networks (SDM-EON). For this purpose, we solve the static Routing, Modulation Level, Spatial Mode, and Spectrum Assignment (RMLSSA) problem using 34 different explainable demand-prioritization strategies. Although previous works have applied heuristics or meta-heuristics to perform demand-prioritization, they have not focused on identifying the best prioritization strategies, their inner operation, and the implications behind their good performance by thorough profiling and impact analysis. We focus on a comprehensive analysis identifying the best explainable strategies to sort network demands in SDM-EON, considering the physical-layer impairments found in optical communications. Also, we show that simply using the common shortest path routing might lead to higher resource requirements. Extensive simulation results show that up to 8.33% capacity savings can be achieved on average by balanced routing, up to a 16.69% capacity savings can be achieved using the best performing demand-prioritization strategy compared to the worst-performing ones, the most used demand-prioritization strategy in the literature (serving demands with higher bandwidth requirements first) is not the best-performing one but the one sorting based on the path lengths, and using double-criteria strategies to break ties is key for a good performance. These results are relevant showing that a good combination of routing and demand-prioritization heuristics impact significantly on network performance. Additionally, they increase the understanding about the inner workings of good heuristics, a valuable knowledge when network settings forbid using more computationally complex approaches

BER-Adaptive RMLSA Algorithm for Wide-Area Flexible Optical Networks

Wide-area optical networks face significant transmission challenges due to the relentless growth of bandwidth demands experienced nowadays. Network operators must consider the relationship between modulation format and maximum reach for each connection request due to the accumulation of physical layer impairments in optical fiber links, to guarantee a minimum quality of service (QoS) and quality of transmission (QoT) to all connection requests. In this work, we present a BER-adaptive solution to solve the routing, modulation format, and spectrum assignment (RMLSA) problem for wide-area elastic optical networks. Our main goal is to maximize successful connection requests in wide-area networks while choosing modulation formats with the highest efficiency possible. Consequently, our technique uses an adaptive bit-error-rate (BER) threshold to achieve communication with the best QoT in the most efficient manner, using the strictest BER value and the modulation format with the smallest bandwidth possible. Additionally, the proposed algorithm relies on 3R regeneration devices to enable long-distances communications if transparent communication cannot be achieved. We assessed our method through simulations for various network conditions, such as the number of regenerators per node, traffic load per user, and BER threshold values. In a scenario without regenerators, the BER-Adaptive algorithm performs similarly to the most relaxed fixed BER threshold studied in blocking probability. However, it ensures a higher QoT to most of the connection requests. The proposed algorithm thrives with the use of regenerators, showing the best performance among the studied solutions, enabling long-distance communications with a high QoT and low blocking probability

Impact of Amplification and Regeneration Schemes on the Blocking Performance and Energy Consumption of Wide-Area Elastic Optical Networks

This paper studies the physical layer’s impact on the blocking probability and energy consumption of wide-area dynamic elastic optical networks (EONs). For this purpose, we consider five network configurations, each named with a network configuration identifier (NCI) from 1 to 5, for which the Routing, Modulation Level, and Spectrum Assignment (RMLSA) problem is solved. NCI 1–4 are transparent configurations based on all-EDFA, hybrid Raman/EDFA amplifiers (with different Raman gain ratio ΓR ), all-DFRA, and alternating span configuration (EDFA and DFRA). NCI 5 is a translucent configuration based on all-EDFA and 3R regenerators. We model the physical layer for every network configuration to determine the maximum achievable reach of optical signals. Employing simulation, we calculate the blocking probability and the energy consumption of the different network configurations. In terms of blocking, our results show that NCI 2 and 3 offer the lowest blocking probability, with at least 1 and 3 orders of magnitude of difference with respect to NCI 1 and 5 at high and low traffic loads, respectively. In terms of energy consumption, the best performing alternatives are the ones with the worst blocking (NCI 1), while NCI 3 exhibits the highest energy consumption with NCI 2ΓR=0.75 following closely. This situation highlights a clear trade-off between blocking performance and energy cost that must be considered when designing a dynamic EON. Thus, we identify NCI 2 using ΓR=0.25 as a promising alternative to reduce the blocking probability significantly in wide-area dynamic EONs without a prohibitive increase in energy consumption

Acoustically Levitated Whispering-Gallery Mode Microlasers

Acoustic levitation has become a crucial technique for contactless manipulation in several fields, particularly in biological applications. However, its application in the photonics field remains largely unexplored. In this study, we implement an affordable and innovative phased-array levitator that enables stable trapping in the air of micrometer dye-doped droplets, thereby enabling the creation of microlasers. For the first time, this paper presents a detailed performance of the levitated microlaser cavity, supported by theoretical analysis concerning the hybrid technology based on the combination of whispering-gallery modes and acoustic fields. The pressure field distribution inside the acoustic cavity is numerically solved and qualitatively matched with the schlieren deflectometry technique. The optical lasing features of the levitated microlasers are highly comparable with those devices based On-a-Chip registering maximum Q-factors of ~ 105, and minimum lasing thresholds ~ 150 nJ cm−2. The emission comb is explained as a sum of multiple individual-supported whispering-gallery modes. The use of novel touchless micrometric lasers, produced with an acoustic levitator brings new technological opportunities based on photonic-acoustic technological platforms

Community-Based Climate Change Adaptation Action Plans to Support Climate-Resilient Development in the Eastern African Highlands

Smallholder farmers in the Eastern African Highlands depend on rain-fed agriculture for their livelihoods. Climate adaptation and sustainable development goals must be targeted in an integrated way to better match farmers’ realities and address local priorities and vulnerabilities in these areas. To support climate-resilient development in the Eastern African Highlands, 224 local stakeholders were engaged in the development of community-based climate change adaptation action plans for the Jimma Highlands in Ethiopia, Taita Hills in Kenya and Mount Kilimanjaro in Tanzania. Participatory methods, high-resolution climate projections and the United Nations Development Programme’s (UNDP’s) guidelines were used in the design of these climate action plans with specific objectives to: 1) engage stakeholders to increase understanding of climate change impacts, adaptation options and their potential trade-offs, 2) build their capacities to design climate change adaptation projects, 3) empower stakeholders to identify existing vulnerabilities and enhance climate resilience and 4) strengthen networks to facilitate information access and sharing. Increased risk of water stress and reduction of agricultural productivity were the most frequently identified climate-change-induced problems in the three areas. The developed action plans target the underlying causes of these problems and describe sector-specific responses, activities, critical barriers and opportunities and support the National Adaptation Programmes of Action.Peer reviewe

The quality of maternity care services as experienced by women in the Netherlands

<p>Abstract</p> <p>Background</p> <p>Maternity care is all care in relation to pregnancy, childbirth and the postpartum period. In the Netherlands maternity care is provided by midwives and general practitioners (GPs) in primary care and midwives and gynecologists in secondary care. To be able to interpret women's experience with the quality of maternity care, it is necessary to take into account their 'care path', that is: their route through the care system.</p> <p>In the Netherlands a new tool is being developed to evaluate the quality of care from the perspective of clients. The tool is called: 'Consumer Quality Index' or CQI and is, within a standardized and systematic framework, tailored to specific health care issues.</p> <p>Within the framework of developing a CQI Maternity Care, data were gathered about the care women in the Netherlands received during pregnancy, childbirth, and the postpartum period. In this paper the quality of maternity care in the Netherlands is presented, as experienced by women at different stages of their care path.</p> <p>Methods</p> <p>A sample of 1,248 pregnant clients of four insurance companies, with their due date in early April 2007, received a postal survey in the third trimester of pregnancy (response 793). Responders to the first questionnaire received a second questionnaire twelve weeks later, on average four weeks after delivery (response 632). Based on care provider and place of birth the 'care path' of the women is described. With factor analysis and reliability analysis five composite measures indicating the quality of treatment by the care provider at different stages of the care path have been constructed. Overall ratings relate to eight different aspects of care, varying from antenatal care by a midwife or GP to care related to neonatal screening.</p> <p>Results</p> <p>41.5 percent of respondents remained in primary care throughout pregnancy, labor, birth and the postpartum period, receiving care from a midwife or general practitioner, 31.3% of respondents gave birth at home. The majority of women (58.5%) experienced referral from one care provider to another, i.e. from primary to secondary care or reverse, at least once. All but two percent of women had one or more ultrasound scans during pregnancy. The composite measures for the quality of treatment in different settings and by different care providers showed that women, regardless of parity, were very positive about the quality of the maternity care they received. Quality-of-treatment scores were high: on average 3.75 on a scale ranging from 1 to 4. Overall ratings on a 0 – 10 scale for quality of care during the antenatal period and during labor, birth and the postpartum period were high as well, on average 8.36.</p> <p>Conclusion</p> <p>The care path of women in maternity care was seldom straight forward. The majority of pregnant women switched from primary to secondary care and back at least once, during pregnancy or during labor and birth or both.</p> <p>The results of the quality measures indicate that the quality of care as experienced by women is high throughout the care system. But with regard to the care during labor and birth the quality of care scores are higher when women know their care provider, when they give birth at home, when they give birth in primary care and when they are assisted by their own midwife.</p

Oleic Acid Produced by a Marine Vibrio spp. Acts as an Anti-Vibrio parahaemolyticus Agent

It is known that some strains of Vibrio parahaemolyticus are responsible for gastroenteric diseases caused by the ingestion of marine organisms contaminated with these bacterial strains. Organic products that show inhibitory activity on the growth of the pathogenic V. parahaemolyticus were extracted from a Vibrio native in the north of Chile. The inhibitory organic products were isolated by reverse phase chromatography and permeation by Sephadex LH20, and were characterized by spectroscopic and spectrometric techniques. The results showed that the prevailing active product is oleic acid, which was compared with standards by gas chromatography and high-performance liquid chromatography (HPLC). These active products might be useful for controlling the proliferation of pathogenic clones of V. parahaemolyticus

Measurement of the non-prompt D-meson fraction as a function of multiplicity in proton-proton collisions at s \sqrt{s} = 13 TeV

The fractions of non-prompt (i.e. originating from beauty-hadron decays) D0 and D+ mesons with respect to the inclusive yield are measured as a function of the charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy of √s = 13 TeV with the ALICE detector at the LHC. The results are reported in intervals of transverse momentum (pT) and integrated in the range 1 < pT < 24 GeV/c. The fraction of non-prompt D0 and D+ mesons is found to increase slightly as a function of pT in all the measured multiplicity intervals, while no significant dependence on the charged- particle multiplicity is observed. In order to investigate the production and hadronisation mechanisms of charm and beauty quarks, the results are compared to PYTHIA 8 as well as EPOS 3 and EPOS 4 Monte Carlo simulations, and to calculations based on the colour glass condensate including three-pomeron fusion

Inclusive and multiplicity dependent production of electrons from heavy-flavour hadron decays in pp and p-Pb collisions

Measurements of the production of electrons from heavy-flavour hadron decays in pp collisions at root s = 13 TeV at midrapidity with the ALICE detector are presented down to a transverse momentum (p(T)) of 0.2 GeV/c and up to p(T) = 35 GeV/c, which is the largest momentum range probed for inclusive electron measurements in ALICE. In p-Pb collisions, the production cross section and the nuclear modification factor of electrons from heavy-flavour hadron decays are measured in the p(T) range 0.5 < p(T) < 26 GeV/c at root s(NN) = 8.16 TeV. The nuclear modification factor is found to be consistent with unity within the statistical and systematic uncertainties. In both collision systems, first measurements of the yields of electrons from heavy-flavour hadron decays in different multiplicity intervals normalised to the multiplicity-integrated yield (self-normalised yield) at midrapidity are reported as a function of the self-normalised charged-particle multiplicity estimated at midrapidity. The self-normalised yields in pp and p-Pb collisions grow faster than linear with the self-normalised multiplicity. A strong p(T) dependence is observed in pp collisions, where the yield of high-p(T) electrons increases faster as a function of multiplicity than the one of low-p(T) electrons. The measurement in p-Pb collisions shows no p(T) dependence within uncertainties. The self-normalised yields in pp and p-Pb collisions are compared with measurements of other heavy-flavour, light-flavour, and strange particles, and with Monte Carlo simulations

Measurement of the Lifetime and Λ Separation Energy of _{Λ}^{3}H

The most precise measurements to date of the _{Λ}^{3}H lifetime τ and Λ separation energy B_{Λ} are obtained using the data sample of Pb-Pb collisions at sqrt[s_{NN}]=5.02  TeV collected by ALICE at the LHC. The _{Λ}^{3}H is reconstructed via its charged two-body mesonic decay channel (_{Λ}^{3}H→^{3}He+π^{-} and the charge-conjugate process). The measured values τ=[253±11(stat)±6(syst)]  ps and B_{Λ}=[102±63(stat)±67(syst)]  keV are compatible with predictions from effective field theories and confirm that the _{Λ}^{3}H structure is consistent with a weakly bound system