9,140 research outputs found

    The influence of wing–wake interactions on the production of aerodynamic forces in flapping flight

    Get PDF
    We used two-dimensional digital particle image velocimetry (DPIV) to visualize flow patterns around the flapping wing of a dynamically scaled robot for a series of reciprocating strokes starting from rest. The base of the wing was equipped with strain gauges so that the pattern of fluid motion could be directly compared with the time history of force production. The results show that the development and shedding of vortices throughout each stroke are highly stereotyped and influence force generation in subsequent strokes. When a wing starts from rest, it generates a transient force as the leading edge vortex (LEV) grows. This early peak, previously attributed to added-mass acceleration, is not amenable to quasi-steady models but corresponds well to calculations based on the time derivative of the first moment of vorticity within a sectional slice of fluid. Forces decay to a stable level as the LEV reaches a constant size and remains attached throughout most of the stroke. The LEV grows as the wing supinates prior to stroke reversal, accompanied by an increase in total force. At stroke reversal, both the LEV and a rotational starting vortex (RSV) are shed into the wake, forming a counter-rotating pair that directs a jet of fluid towards the underside of the wing at the start of the next stroke. We isolated the aerodynamic influence of the wake by subtracting forces and flow fields generated in the first stroke, when the wake is just developing, from those produced during the fourth stroke, when the pattern of both the forces and wake dynamics has reached a limit cycle. This technique identified two effects of the wake on force production by the wing: an early augmentation followed by a small attenuation. The later decrease in force is consistent with the influence of a decreased aerodynamic angle of attack on translational forces caused by downwash within the wake and is well explained by a quasi-steady model. The early effect of the wake is not well approximated by a quasi-steady model, even when the magnitude and orientation of the instantaneous velocity field are taken into account. Thus, the wake capture force represents a truly unsteady phenomenon dependent on temporal changes in the distribution and magnitude of vorticity during stroke reversal

    Expansion of the economic frontier : Paraguayan growth in the 1970's / 999

    Get PDF
    Includes bibliographical references (p. 18-20)

    Equine digital tendons show breed‐specific differences in their mechanical properties that may relate to athletic ability and predisposition to injury

    Get PDF
    Background Throughout the ages, human subjects have selected horse breeds for their locomotor capacities. Concurrently, tissue properties may have diversified because of specific requirements of different disciplines. Objectives The aim of this study was to compare the biomechanical properties of tendons with different functions between equine breeds traditionally selected for racing or sport. Study design This study used ex vivo tendons and compared the mechanical properties of the common digital extensor tendon (CDET) and superficial digital flexor tendon (SDFT) between racehorses (Thoroughbred [TB]) and sports horses (Friesian Horse [FH], Warmblood [WB]). Methods The SDFT and CDET of FH (n = 12), WBs (n = 12) and TBs (n = 8) aged 3-12 years were harvested. The cross sectional area (cm(2)), maximal load (N), ultimate strain (%), ultimate stress (MPa) and elastic modulus (MPa) were determined and tested for significant differences between the breeds (P<0.05). Results The SDFT from WB horses had a significantly lower elastic modulus than TB horses and failed at a higher strain and load than both FHs and TBs. The mechanical properties of the CDET did not differ between breeds. In agreement with previous studies, the CDET failed at a higher stress and had a higher elastic modulus than the SDFT and, for the WB group of horses only, failed at a significantly lower strain. Interestingly, the mode of failure differed between breeds, particularly with respect to the FHs. Main limitations The exercise history of horses used in this study was unknown and the age-range was relatively large; both these factors may have influenced the absolute properties reported in this study. Conclusions This study shows for the first time that mechanical properties of the SDFT differ between breeds. These properties are likely to be related to selection for high-speed vs. an extravagant elastic gait and may be an important indicator of performance ability. The is available in Spanish - see Supporting Informatio

    Mean flow field and surface heating produced by unequal shock interactions at hypersonic speeds

    Get PDF
    Mean velocity profiles were measured in a free shear layer produced by the interaction of two unequal strength shock waves at hypersonic free-stream Mach numbers. Measurements were made over a unit Reynolds number range of 3,770,000 per meter to 17,400,000 per meter based on the flow on the high velocity side of the shear layer. The variation in measured spreading parameters with Mach number for the fully developed flows is consistent with the trend of the available zero velocity ratio data when the Mach numbers for the data given in this study are taken to be characteristic Mach numbers based on the velocity difference across the mixing layer. Surface measurements in the shear-layer attachment region of the blunt-body model indicate peak local heating and static pressure consistent with other published data. Transition Reynolds numbers were found to be significantly lower than those found in previous data

    Mobile integrated conditional access system

    Get PDF
    This paper presents design of a novel security architecture integrating mobile and broadcasting technologies in the Pay-TV system. The security architecture proposed herein is a state-of-the-art solution to tackle well-known problems challenging current Pay-TV systems including but not limited to interoperability amongst service providers, relatively high cost of the service deployment, the security compromise, limited interactivity and bespoken services offered to subscribers. It also proposes the Follow-me service that enables subscribers to access their entitlements via an arbitrary set-top box

    SDO/HMI survey of emerging active regions for helioseismology

    Full text link
    Observations from the Solar Dynamics Observatory (SDO) have the potential for allowing the helioseismic study of the formation of hundreds of active regions, which would enable us to perform statistical analyses. Our goal is to collate a uniform data set of emerging active regions observed by the SDO/HMI instrument suitable for helioseismic analysis up to seven days before emergence. We restricted the sample to active regions that were visible in the continuum and emerged into quiet Sun largely avoiding pre-existing magnetic regions. As a reference data set we paired a control region (CR), with the same latitude and distance from central meridian, with each emerging active region (EAR). We call this data set, which is currently comprised of 105 emerging active regions observed between May 2010 and November 2012, the SDO Helioseismic Emerging Active Region (SDO/HEAR) survey. To demonstrate the utility of a data set of a large number of emerging active regions, we measure the relative east-west velocity of the leading and trailing polarities from the line-of-sight magnetogram maps during the first day after emergence. The latitudinally averaged line-of-sight magnetic field of all the EARs shows that, on average, the leading (trailing) polarity moves in a prograde (retrograde) direction with a speed of 121 +/- 22 m/s (-70 +/- 13 m/s) relative to the Carrington rotation rate in the first day. However, relative to the differential rotation of the surface plasma, the east-west velocity is symmetric, with a mean of 95 +/- 13 m/s. The SDO/HEAR data set will not only be useful for helioseismic studies, but will also be useful to study other features such as the surface magnetic field evolution of a large sample of EARs.Comment: Accepted by Astronomy and Astrophysics, 11 figures, one longtable; update corrects units in Figure

    Acupuncture for chronic neck pain: a pilot for a randomised controlled trial

    Get PDF
    Background: Acupuncture is increasingly being used for many conditions including chronic neck pain. However the evidence remains inconclusive, indicating the need for further well-designed research. The aim of this study was to conduct a pilot randomised controlled parallel arm trial, to establish key features required for the design and implementation of a large-scale trial on acupuncture for chronic neck pain. Methods: Patients whose GPs had diagnosed neck pain were recruited from one general practice, and randomised to receive usual GP care only, or acupuncture ( up to 10 treatments over 3 months) as an adjunctive treatment to usual GP care. The primary outcome measure was the Northwick Park Neck Pain Questionnaire (NPQ) at 3 months. The primary analysis was to determine the sample size for the full scale study. Results: Of the 227 patients with neck pain identified from the GP database, 28 (12.3%) consenting patients were eligible to participate in the pilot and 24 (10.5%) were recruited to the trial. Ten patients were randomised to acupuncture, receiving an average of eight treatments from one of four acupuncturists, and 14 were randomised to usual GP care alone. The sample size for the full scale trial was calculated from a clinically meaningful difference of 5% on the NPQ and, from this pilot, an adjusted standard deviation of 15.3%. Assuming 90% power at the 5% significance level, a sample size of 229 would be required in each arm in a large-scale trial when allowing for a loss to follow-up rate of 14%. In order to achieve this sample, one would need to identify patients from databases of GP practices with a total population of 230,000 patients, or approximately 15 GP practices roughly equal in size to the one involved in this study (i.e. 15,694 patients). Conclusion: This pilot study has allowed a number of recommendations to be made to facilitate the design of a large-scale trial, which in turn will help to clarify the existing evidence base on acupuncture for neck pain
    corecore