938 research outputs found
A simple, ultrahigh vacuum compatible scanning tunneling microscope for use at variable temperatures
We present the construction of a very compact scanning tunneling microscope (STM) which can be operated at temperatures between 4 and 350 K. The tip and a tiny tip holder are the only movable parts, whereas the sample and the piezoscanner are rigidly attached to the body of the STM. This leads to an excellent mechanical stability. The coarse approach system relies on the slip-stick principle and is operated by the same piezotube which is used for scanning. As an example of the performance of the device, images of a NbSe2 surface with atomic resolution are obtained
Calibration of piezoelectric positioning actuators using a reference voltage-to-displacement transducer based on quartz tuning forks
We use a piezoelectric quartz tuning fork to calibrate the displacement of
ceramic piezoelectric scanners which are widely employed in scanning probe
microscopy. We measure the static piezoelectric response of a quartz tuning
fork and find it to be highly linear, non-hysteretic and with negligible creep.
These performance characteristics, close to those of an ideal transducer, make
quartz transducers superior to ceramic piezoelectric actuators. Furthermore,
quartz actuators in the form of a tuning fork have the advantage of yielding
static displacements comparable to those of local probe microscope scanners. We
use the static displacement of a quartz tuning fork as a reference to calibrate
the three axis displacement of a ceramic piezoelectric scanner. Although this
calibration technique is a non-traceable method, it can be more versatile than
using calibration grids because it enables to characterize the linear and
non-linear response of a piezoelectric scanner in a broad range of
displacements, spanning from a fraction of a nanometer to hundreds of
nanometers. In addition, the creep and the speed dependent piezoelectric
response of ceramic scanners can be studied in detail.Comment: 9 pages, 3 figure
Innovative Biogas Multi-Stage Biogas Plant and Novel Analytical System
AbstractThe here presented applied research and development project is targeted to the development and application of new and improved techniques in plant design, performance analysis and process control. Hereto following the required steps are illustrated and the goals are outlined. The project covers the development of a previously patented anaerobic digestion process, adaption of flow cytometry as an analytical instrument and investigation of innovative ways of disposal of solid fermentation wastes. The preliminary experiences with a newly built research plant employing a novel anaerobic biogas digestion technique are discussed. In this paper the first outcomes concerning the construction and operation are discussed. A novel method of disposal of the fermentation wastes is also discussed and first results are shown
X-Ray Computed Tomography: Semiautomated Volumetric Analysis of Late-Stage Lung Tumors as a Basis for Response Assessments
Background. This study presents a semiautomated approach for volumetric analysis of lung tumors and evaluates the feasibility of using volumes as an alternative to line lengths as a basis for response evaluation criteria in solid tumors (RECIST). The overall goal for the implementation was to accurately, precisely, and efficiently enable the analyses of lesions in the lung under the guidance of an operator. Methods. An anthropomorphic phantom with embedded model masses and 71 time points in 10 clinical cases with advanced lung cancer was analyzed using a semi-automated workflow. The implementation was done using the Cognition Network Technology. Results. Analysis of the phantom showed an average accuracy of 97%. The analyses of the clinical cases showed both intra- and interreader variabilities of approximately 5% on average with an upper 95% confidence interval of 14% and 19%, respectively. Compared to line lengths, the use of volumes clearly shows enhanced sensitivity with respect to determining response to therapy. Conclusions. It is feasible to perform volumetric analysis efficiently with high accuracy and low variability, even in patients with late-stage cancer who have complex lesions
Quantum shot-noise at local tunneling contacts on mesoscopic multiprobe conductors
New experiments that measure the low-frequency shot-noise spectrum at local
tunneling contacts on mesoscopic structures are proposed. The current
fluctuation spectrum at a single tunneling tip is determined by local partial
densities of states. The current-correlation spectrum between two tunneling
tips is sensitive to non-diagonal density of states elements which are
expressed in terms of products of scattering states of the conductor. Thus such
an experiment permits to investigate correlations of electronic wave functions.
We present specific results for a clean wire with a single barrier and for
metallic diffusive conductors.Comment: 4 pages REVTeX, 2 figure
Atomic Scale Sliding and Rolling of Carbon Nanotubes
A carbon nanotube is an ideal object for understanding the atomic scale
aspects of interface interaction and friction. Using molecular statics and
dynamics methods different types of motion of nanotubes on a graphite surface
are investigated. We found that each nanotube has unique equilibrium
orientations with sharp potential energy minima. This leads to atomic scale
locking of the nanotube.
The effective contact area and the total interaction energy scale with the
square root of the radius. Sliding and rolling of nanotubes have different
characters. The potential energy barriers for sliding nanotubes are higher than
that for perfect rolling. When the nanotube is pushed, we observe a combination
of atomic scale spinning and sliding motion. The result is rolling with the
friction force comparable to sliding.Comment: 4 pages (two column) 6 figures - one ep
Folding of a donor–acceptor polyrotaxane by using noncovalent bonding interactions
Mechanically interlocked compounds, such as bistable catenanes and bistable rotaxanes, have been used to bring about actuation in nanoelectromechanical systems (NEMS) and molecular electronic devices (MEDs). The elaboration of the structural features of such rotaxanes into macromolecular materials might allow the utilization of molecular motion to impact their bulk properties. We report here the synthesis and characterization of polymers that contain π electron-donating 1,5-dioxynaphthalene (DNP) units encircled by cyclobis(paraquat-p-phenylene) (CBPQT4+), a π electron-accepting tetracationic cyclophane, synthesized by using the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC). The polyrotaxanes adopt a well defined “folded” secondary structure by virtue of the judicious design of two DNP-containing monomers with different binding affinities for CBPQT4+. This efficient approach to the preparation of polyrotaxanes, taken alongside the initial investigations of their chemical properties, sets the stage for the preparation of a previously undescribed class of macromolecular architectures
Dynamic image potential at an Al(111) surface
We evaluate the electronic self-energy Sigma(E) at an Al(111) surface using the GW space-time method. This self-energy automatically includes the image potential V-im not present in any local-density approximation for exchange and correlation. We solve the energy-dependent quasiparticle equations and calculate the effective local potential experienced by electrons in the near-surface region. The relative contribution of exchange proves to be very different for states above the Fermi level. The image-plane position for interacting electrons is closer to the surface than for the purely electrostatic effects felt by test charges, and, like its classical counterpart, is drawn inwards by the effects of atomic structure
Landauer Theory, Inelastic Scattering and Electron Transport in Molecular Wires
In this paper we address the topic of inelastic electron scattering in
mesoscopic quantum transport. For systems where only elastic scattering is
present, Landauer theory provides an adequate description of transport that
relates the electronic current to single-particle transmission and reflection
probabilities. A formalism proposed recently by Bonca and Trugman facilitates
the calculation of the one-electron transmission and reflection probabilities
for inelastic processes in mesoscopic conductors connected to one-dimensional
ideal leads. Building on their work, we have developed a self-consistent
procedure for the evaluation of the non-equilibrium electron distributions in
ideal leads connecting such mesoscopic conductors to electron reservoirs at
finite temperatures and voltages. We evaluate the net electronic current
flowing through the mesoscopic device by utilizing these non-equilibrium
distributions. Our approach is a generalization of Landauer theory that takes
account of the Pauli exclusion principle for the various competing elastic and
inelastic processes while satisfying the requirement of particle conservation.
As an application we examine the influence of elastic and inelastic scattering
on conduction through a two site molecular wire with longitudinal phonons using
the Su-Schrieffer-Heeger model of electron-phonon coupling.Comment: 25 pages, 8 figure
- …