Molecular Imprinting for High-Added Value Metals: An Overview of Recent Environmental Applications

One of the most hot topics of recent research is the reuse of some compounds existing as pollutants in environment. These compounds (molecules, ions, complexes, etc.) are of high-added value and it will be ideal to selectively bind them with any environmental application and reuse them in their initial or modified form. The latter can be achieved using molecular imprinting. In the present review article, an overview of the recent attempts for the selective binding of some precious metals (i.e., gold, silver, and platinum) of high-added value is done using molecular imprinted polymers (MIPs) as materials. The simplicity of their use, their relatively low cost, and the broad range of possible guest molecules (small organic molecules, ions, metals, and also biological macromolecules) have since led to the important development of molecular imprinting

Non-Isothermal Crystallization Kinetics of PBSu/Biochar Composites Studied by Isoconversional and Model Fitting Methods

Non-isothermal crystallization of Poly(butylene succinate) (PBSu)/biochar composites was studied at various constant cooling rates using differential scanning calorimetry. The analysis of the kinetics data revealed that the overall crystallization rate and activation energy of the PBSu polymer were significantly influenced by the addition of biochar. Specifically, the PBSu/5% biochar composite with a higher filler content was more effective as a nucleation agent in the polymer matrix, as indicated by the nucleation activity (ψ) value of 0.45. The activation energy of the PBSu/5% biochar composite was found to be higher than that of the other compositions, while the nucleation activity of the PBSu/biochar composites decreased as the biochar content increased. The Avrami equation, which is commonly used to describe the kinetics of crystallization, was found to be limited in accurately predicting the non-isothermal crystallization behavior of PBSu and PBSu/biochar composites. Although the Nakamura/Hoffman–Lauritzen model performed well overall, it may not have accurately predicted the crystallization rate at the end of the process due to the possibility of secondary crystallization. Finally, the combination of the Šesták–Berggren model with the Hoffman–Lauritzen theory was found to accurately predict the crystallization behavior of the PBSu/biochar composites, indicating a complex crystallization mechanism involving both nucleation and growth. The Kg parameter of neat PBSu was found to be 0.7099 K2, while the melting temperature and glass transition temperature of neat PBSu were found to be 114.91 °C and 35 °C, respectively, very close to the measured values. The Avrami nucleation dimension n was found to 2.65 for PBSu/5% biochar composite indicating that the crystallization process is complex in the composites

UV-Curing Additive Manufacturing of Bio-Based Thermosets: Effect of Diluent Concentration on Printing and Material Properties of Itaconic Acid-Based Materials

In the quest toward sustainable thermosets, researchhas been conductedon various polymer classes like epoxy, benzoxazines, acryl-/methacrylates,etc. One particular group that can also be utilized as sustainableinks for additive manufacturing is itaconic acid-based unsaturatedpolyester resins. However, due to increased viscosity of the resins,the use of reactive diluents is required to increase their processability.While research has focused on creating different polymeric structuresto expand the possible applications, the required amount of diluenthas not received equal attention. In this work, a group of itaconicacid-based polyesters was synthesized to create a series of formulationswith different reactive diluent contents. The physicochemical propertiesof the prepared formulations, along with their reactivity toward UVlight, were assessed via photo-differential scanning calorimetry (photo-DSC),real-time attenuated total reflectance (RT-ATR), and photorheologymeasurements. The same formulations were then used to fabricate testspecimens via digital light processing (DLP) three-dimensional (3D)printing, which were examined as to their thermomechanical propertiesby means of dynamic mechanical analysis (DMA) and thermogravimetricanalysis (TGA) measurements

Kraft Lignin/Tannin as a Potential Accelerator of Antioxidant and Antibacterial Properties in an Active Thermoplastic Polyester-Based Multifunctional Material

This research focuses on key priorities in the field of sustainable plastic composites that will lead to a reduction in CO2 pollution and support the EU\u27s goal of becoming carbon neutral by 2050. The main challenge is to develop high-performance polyphenol-reinforced thermoplastic composites, where the use of natural fillers replaces the usual chemical additives with non-toxic ones, not only to improve the final performance but also to increase the desired multifunctionalities (structural, antioxidant, and antibacterial). Therefore, poly (lactic acid) (PLA) composites based on Kraft lignin (KL) and tannin (TANN) were investigated. Two series of PLA composites, PLA-KL and PLA-TANN, which contained natural fillers (0.5%, 1.0%, and 2.5% (w/w)) were prepared by hot melt extrusion. The effects of KL and TANN on the PLA matrices were investigated, especially the surface physicochemical properties, mechanical properties, and antioxidant/antimicrobial activity. The surface physicochemical properties were evaluated by measuring the contact angle (CA), roughness, zeta potential, and nanoindentation. The results of the water contact angle showed that neither KL nor TANN caused a significant change in the wettability, but only a slight increase in the hydrophilicity of the PLA composites. The filler loading, the size of the particles with their available functional groups on the surfaces of the PLA composites, and the interaction between the filler and the PLA polymer depend on the roughness and zeta potential behavior of the PLA-KL and PLA-TANN composites and ultimately improve the surface mechanical properties. The antioxidant properties of the PLA-KL and PLA-TANN composites were determined using the DPPH (2, 2\u27-diphenyl-1-picrylhydrazyl) test. The results show an efficient antioxidant behavior of all PLA-KL and PLA-TANN composites, which increases with the filler content. Finally, the KL- and PLA-based TANN have shown resistance to the Gram-negative bacteria, E. coli, but without a correlation trend between polyphenol filler content and structure

Structural investigation of poly(ethylene furanoate) polymorphs

α and β crystalline phases of poly(ethylene furanoate) (PEF) were determined using X-ray powder diffraction by structure resolution in direct space and Rietveld refinement. Moreover, the α' structure of a PEF sample was refined from data previously reported for PEF fiber. Triclinic α-PEF a = 5.729 Å, b = 7.89 Å, c = 9.62 Å, α = 98.1°, β = 65.1°, γ = 101.3°; monoclinic α'-PEF a = 5.912 Å, b = 6.91 Å, c = 19.73 Å, α = 90°, β = 90°, γ = 104.41°, and monoclinic β-PEF a = 5.953 Å, b = 6.60 Å, c = 10.52 Å, α = 90°, β = 107.0°, γ = 90° were determined as the best fitting of X-ray diffraction (XRD) powder patterns. Final atomic coordinates are reported for all polymorphs. In all cases PEF chains adopted an almost planar configuration

Biobased poly(ethylene furanoate-:Co -ethylene succinate) copolyesters: Solid state structure, melting point depression and biodegradability

Novel, biobased poly(ethylene furanoate-co-ethylene succinate) copolyesters were successfully prepared by melt polycondensation and their solid state structure, melting point depression and biodegradability were evaluated in detail.</p

The Effect of Biochar Addition on Thermal Stability and Decomposition Mechanism of Poly(butylene succinate) Bionanocomposites

In the present study, poly(butylene succinate) (PBSu) and its bionanocomposites containing 1, 2.5, and 5 wt.% biochar (MSP700) were prepared via in situ melt polycondensation in order to investigate the thermal stability and decomposition mechanism of the materials. X-ray photoelectron spectroscopy (XPS) measurements were carried out to analyze the surface area of a biochar sample and PBSu/biochar nanocomposites. From XPS, it was found that only physical interactions were taking place between PBSu matrix and biochar nanoadditive. Thermal stability, decomposition kinetics, and the decomposition mechanism of the pristine PBSu and PBSu/biochar nanocomposites were thoroughly studied by thermogravimetric analysis (TGA) and pyrolysis–gas chromatography/mass spectrometry (Py−GC/MS). TGA thermograms depicted that all materials had high thermal stability, since their decomposition started at around 300 °C. However, results indicated a slight reduction in the thermal stability of the PBSu biochar nanocomposites because of the potential catalytic impact of biochar. Py−GC/MS analysis was employed to examine, in more detail, the thermal degradation mechanism of PBSu nanocomposites filled with biochar. From the decomposition products identified by Py−GC/MS after pyrolysis at 450 °C, it was found that the decomposition pathway of the PBSu/biochar nanocomposites took place mainly via β-hydrogen bond scission, which is similar to that which took place for neat PBSu. However, at higher biochar content (5 wt.%), some localized differences in the intensity of the peaks of some specific thermal degradation products could be recognized, indicating that α-hydrogen bond scission was also taking place. A study of the thermal stability and decomposition pathway of PBSu/biochar bionanocomposites is crucial to examine if the new materials fulfill the requirements for further investigation for mulch films in agriculture or in electronics as possible applications

Reinforcement of graphene nanoplatelets on plasticized poly (lactic acid) nanocomposites: mechanical, thermal, morphology, and antibacterial properties

Plasticized poly(lactic acid) (PLA)‐based nanocomposites filled with graphene nanoplatelets (xGnP) and containing poly(ethylene glycol) (PEG) and epoxidized palm oil (EPO) with ratio 2 : 1 (2P : 1E) as hybrid plasticizer were prepared by melt blending method. The key objective is to take advantage of plasticization to increase the material ductility while preserving valuable stiffness, strength, and toughness via addition of xGnP. The tensile modulus of PLA/2P : 1E/0.1 wt % xGnP was substantially improved (30%) with strength and elasticity maintained, as compared to plasticized PLA. TGA analysis revealed that the xGnP was capable of acting as barrier to reduce thermal diffusion across the plasticized PLA matrix, and thus enhanced thermal stability of the plasticized PLA. Incorporation of xGnP also enhanced antimicrobial activity of nanocomposites toward Escherichia coli, Salmonella typhimurium, Staphylococcus aureus, and Listeria monocytogenes

A New Era in Engineering Plastics: Compatibility and Perspectives of Sustainable Alipharomatic Poly(ethylene terephthalate)/Poly(ethylene 2,5-furandicarboxylate) Blends

The industrialisation of poly(ethylene 2,5-furandicarboxylate) for total replacement of poly(ethylene terephthalate) in the polyester market is under question. Preparation of high-performing polymer blends is a well-established strategy for tuning the properties of certain homopolymers and create tailor-made materials to meet the demands for a number of applications. In this work, the structure, thermal properties and the miscibility of a series of poly(ethylene terephthalate)/poly(ethylene 2,5-furandicarboxylate) (PET/PEF) blends have been studied. A number of thermal treatments were followed in order to examine the thermal transitions, their dynamic state and the miscibility characteristics for each blend composition. Based on their glass transition temperatures and melting behaviour the PET/PEF blends are miscible at high and low poly(ethylene terephthalate) (PET) contents, while partial miscibility was observed at intermediate compositions. The multiple melting was studied and their melting point depression was analysed with the Flory-Huggins theory. In an attempt to further improve miscibility, reactive blending was also investigated