Modelling and simulation of advanced semiconductor devices

This paper presents a modelling and simulation study of advanced semiconductor devices. Different Technology Computer Aided Design approaches and models, used in nowadays research are described here. Our discussions are based on numerous theoretical approaches starting from first principle methods and continuing with discussions based on more well stablished methods such as Drift-Diffusion, Monte Carlo and Non-Equilibrium Green’s Function formalism

Two-point phase correlations of a one-dimensional bosonic Josephson junction

We realize a one-dimensional Josephson junction using quantum degenerate Bose gases in a tunable double well potential on an atom chip. Matter wave interferometry gives direct access to the relative phase field, which reflects the interplay of thermally driven fluctuations and phase locking due to tunneling. The thermal equilibrium state is characterized by probing the full statistical distribution function of the two-point phase correlation. Comparison to a stochastic model allows to measure the coupling strength and temperature and hence a full characterization of the system

Knee megaprosthesis: a salvage solution for severe open and complex distal femoral fracture associated with an ipsilateral brachial plexus injury (a case report with literature review)

Complex distal femoral fractures in the young patient often occur as a result of high velocity trauma. Timely recognition and treatment is verything in such a situation, and it needs a robust staged management pathway to optimize the chance of limb preservation. We report a case of a motorcyclist admitted to the department of orthopedics at Chambery hospital, France, with a complex comminuted and open distal femoral fracture of the left leg, associated with a brachial plexus injury to the ipsilateral upper limb. On arrival to the emergency department, damage control stabilization and surgery was commenced, debridement of contaminated non-viable tissue, abundant antiseptic lavage and application of external fixation coupled with the use of antibiotic spacer. Following normalization of inflammatory markers and ensuring no clinical signs of infection, subsequent management consisted of joint reconstruction to achieve a functional knee. The external fixator and femoral spacer wasremoved and a modular megaprosthesis was implanted with a lateral gastrocnemius flap to cover the exposed knee joint and reinforce the extensor apparatus. Nerve graft to the left brachial plexus injury was performed at University Hospital of Grenoble. Our patient entered an intensive rehabilitation program and at 1 year follow-up achieved good knee function and sensation to the left upper limb

Matter-wave recombiners fro trapped Bose-Einstein condensates

Interferometry with trapped atomic Bose-Einstein condensates (BECs) requires the development of techniques to recombine the two paths of the interferometer and map the accumulated phase difference to a measurable atom number difference. We have implemented and compared two recombining procedures in a double-well-based BEC interferometer. The first procedure utilizes the bosonic Josephson effect and controlled tunneling of atoms through the potential barrier, similar to laser light in an optical fiber coupler. The second one relies on the interference of the reflected and transmitted parts of the BEC wave function when impinging on the potential barrier, analogous to light impinging on a half-silvered mirror. Both schemes were implemented successfully, yielding an interferometric contrast of similar to 20% and 42% respectively. Building efficient matter-wave recombiners represents an important step towards the coherent manipulation of external quantum superposition states of BECs

Stuctural And Magnetic Characterization Of CoxZn1-x/Cu Multilayers Obtained by Electrodeposition

We present the experimental results of (CoxZn1-x/Cu)n multilayers (3<x<10) grown using the electrochemical dual bath method. The X-ray diffraction patterns have shown that the CoZn structural lattice parameters are close to those of the monoclinic CoZn13 compound. We have developed an analytical model in the X-ray kinematical theory adapted to the electrodeposited (CoxZn1-x/Cu) multilayers. We have shown that the model can give interesting structural information about the multilayer components, and reproduces the position of the satellite peaks around the main diffraction peak. Thus we have deduced the multilayer period and performed comparison between experimental results and the analytical model. The magnetic properties at room temperature reveal both superparamagnetic and ferromagnetic features. The inclusion of Zn into the magnetic layer and the existence of CoZnCu based alloy at the interfacial regions explain the magnetic properties. The magnetoresistance (MR) loop displays a broad , rounded maximum and the saturation is not observed even at high applied fields. The MR(H) behaviour and its small ratio can be attributed to interfacial effects.We present the experimental results of (CoxZn1-x/Cu)n multilayers (3<x<10) grown using the electrochemical dual bath method. The X-ray diffraction patterns have shown that the CoZn structural lattice parameters are close to those of the monoclinic CoZn13 compound. We have developed an analytical model in the X-ray kinematical theory adapted to the electrodeposited (CoxZn1-x/Cu) multilayers. We have shown that the model can give interesting structural information about the multilayer components, and reproduces the position of the satellite peaks around the main diffraction peak. Thus we have deduced the multilayer period and performed comparison between experimental results and the analytical model. The magnetic properties at room temperature reveal both superparamagnetic and ferromagnetic features. The inclusion of Zn into the magnetic layer and the existence of CoZnCu based alloy at the interfacial regions explain the magnetic properties. The magnetoresistance (MR) loop displays a broad , rounded maximum and the saturation is not observed even at high applied fields. The MR(H) behaviour and its small ratio can be attributed to interfacial effects

Agronomic valorization of the composts with olive waste

In the Mediterranean countries, olive waste, a co-product of the olive oil trituration process, presents a serious environmental problem because of their polyphenol charge, given the quantities rejected each year. In previous works, this waste has been co-composted with other substrates and has been transformed into non-phytotoxic substances in conformity with the French standard NFU44-051 due to their composition in nutritional elements like soluble sugars, proteins and mineral elements. This study examines the efficacy of these substances on radish and potato crops. To do this, seeds were sown on the plot. For each crop, 4 plots were planned: land amended with manure (M), NPK fertilizer (F), the vegetable water substance (VW) and the olive-pomace substance (OP) in addition to the vegetable water. The first three substances served as controls. A statistical study of correlation between the latter and those that characterize the soil after amendment was carried out.  The obtained results showed that there are two strong correlations between pH, organic matter, dry matter and soil moisture amended by the OW compost and, on the one hand, the morphological growth parameters of the two crops and, on the other hand, the parameters of their production

Adaptability of irrigated spring canola oil production to the US High Plains

Canola oil is high in oleic acid which is commonly used for food and industrial purposes. To determine adaptability of spring canola (Brassica napus L.) to the High Plains for industrial oil production, 26 irrigated trials were conducted from 2005 to 2008. Trials were divided into five regions—1: 36–37◦N 108◦W; 2: 39–40◦N 101–103◦W; 3: 41–42◦N 102–103◦W; 4: 41–42◦N 104◦W; 5: 43–44◦N 106–108◦W. Cultural practices were based on site-specific protocols. Four cultivars, Hyola 401, Hyola 357 Magnum, SW Marksman, and SW Patriot, were planted in replicated plots in April or May under standard irrigation and harvested in July to October depending on region. Seed yield Hyola 401 and Hyola 357 Magnum were higher than SW Marksman and SW Patriot across the five regions and within Regions 1, 2, 3, and 5. Regions 1, 2 and 3 yielded significantly greater than did Regions 4 and 5. Samples from 18 trials were examined for their oil content and fatty acid distribution. The four cultivars had greater than 38% oil content; SW Marksman and SW Patriot had higher oil content than Hyola 401 and Hyola 357 Mag. Higher oil content was achieved in Regions 1, 4 and 5. Across and within regions, the percent of oleic acid did not differ for the four cultivars. The mean content of oleic acid decreased going north from Region 2 to Region 5, as did seed yield in the High Plains. Linoleic acid increased going north from Region 1. Linolenic acids showed little variation across regions. Considering yield and total oil content together, growing spring canola would be excellent in the High Plains

Adaptability of irrigated spring canola oil production to the US High Plains

Canola oil is high in oleic acid which is commonly used for food and industrial purposes. To determine adaptability of spring canola (Brassica napus L.) to the High Plains for industrial oil production, 26 irrigated trials were conducted from 2005 to 2008. Trials were divided into five regions—1: 36–37◦N 108◦W; 2: 39–40◦N 101–103◦W; 3: 41–42◦N 102–103◦W; 4: 41–42◦N 104◦W; 5: 43–44◦N 106–108◦W. Cultural practices were based on site-specific protocols. Four cultivars, Hyola 401, Hyola 357 Magnum, SW Marksman, and SW Patriot, were planted in replicated plots in April or May under standard irrigation and harvested in July to October depending on region. Seed yield Hyola 401 and Hyola 357 Magnum were higher than SW Marksman and SW Patriot across the five regions and within Regions 1, 2, 3, and 5. Regions 1, 2 and 3 yielded significantly greater than did Regions 4 and 5. Samples from 18 trials were examined for their oil content and fatty acid distribution. The four cultivars had greater than 38% oil content; SW Marksman and SW Patriot had higher oil content than Hyola 401 and Hyola 357 Mag. Higher oil content was achieved in Regions 1, 4 and 5. Across and within regions, the percent of oleic acid did not differ for the four cultivars. The mean content of oleic acid decreased going north from Region 2 to Region 5, as did seed yield in the High Plains. Linoleic acid increased going north from Region 1. Linolenic acids showed little variation across regions. Considering yield and total oil content together, growing spring canola would be excellent in the High Plains