Determining the Complex Refractive Index of Materials in the Far-Infrared from Terahertz Time-Domain Data

Terahertz time‐domain spectroscopy is a well‐established technique to study the far‐infrared electromagnetic response of materials. Measurements are broadband, fast, and performed at room temperature. Moreover, compact systems are nowadays commercially available, which can be operated by nonspecialist staff. Thanks to the determination of the amplitude and phase of the recorded signals, both refractive index and absorption coefficient of the sample material can be obtained. However, determining these electromagnetic parameters should be performed cautiously when samples are more or less transparent. In this chapter, we explain how to extract the material parameters from terahertz time‐domain data. We list the main sources of error, and their contribution to uncertainties. We give rules to select the most adapted technique for an optimized characterization, depending on the transparency of the samples, and address the case of samples with strong absorption peaks or exhibiting scattering

10-W-level monolithic dysprosium-doped fiber laser at 3.24 μm

We report, to the best of our knowledge, the first entirely monolithic dysprosium (Dy)-doped fluoride fiber laser operating in the mid-IR region. The system delivers 10.1 W at 3.24 μm in continuous operation, a record for fiber oscillators in this range of wavelengths. The Dy3+ fiber is pumped in-band using an erbium-doped fiber laser at 2.83 μm made in-house and connected through a fusion splice. Two fiber Bragg gratings directly written in the Dy-doped fiber form the 3.24 μm laser cavity to provide a spectrally controlled laser output. This substantial increase of output power in the 3.0 3.3 μm spectral range–could open new possibilities for applications in spec-troscopy and advanced manufacturing

SunCHem: an integrated process for the hydrothermal production of methane from microalgae and CO2 mitigation

We describe a potential novel process (SunCHem) for the production of bio-methane via hydrothermal gasification of microalgae, envisioned as a closed-loop system, where the nutrients, water, and CO2 produced are recycled. The influence on the growth of microalgae of nickel, a trace contaminant that might accumulate upon effluent recycling, was investigated. For all microalgae tested, the growth was adversely affected by the nickel present (1, 5, and 10 ppm). At 25 ppm Ni, complete inhibition of cell division occurred. Successful hydrothermal gasification of the microalgae Phaeodactylum tricornutum to a methane-rich gas with high carbon gasification efficiency (68-74%) and C1-C3 hydrocarbon yields of 0.2 gC1-C3/gDM (DM, dry matter) was demonstrated. The biomass-released sulfur was shown to adversely affect Ru/C catalyst performance. Liquefaction of P. tricornutum at short residence times around 360°C was possible without coke formatio

Bilan et perspectives des deux écoles techniques « notions et techniques en écologie » organisées par le Département EFPA

La création du Département «Écologie des Forêts, Prairies et milieux Aquatiques» a suscité de la part des personnels techniques concernés une volonté d’intégration collective sous le concept fédérateur de l’écologie. Pour cela deux écoles techniques ont été organisées sur des notions et méthodes d’écologie par un Comité de pilotage composé de techniciens et de scientifiques. L’objectif visait à familiariser les techniciens aux concepts de l’écologie et à les aider à se situer dans les thématiques de recherche du Département EFPA. Enfin, il s’agissait d’instaurer une communauté de pratique autour de l’écologie. Ces écoles ont rassemblé 79 personnes, en proposant visites sur le terrain et séances en salle. Deux animations ont particulièrement été appréciées, l’une sous forme d’un jeu en préambule, l’autre sous forme de présentations par des binômes techniciens/chercheurs. Les participants sont plutôt convaincus d’avoir progressé sur les notions en écologie et ils ont la volonté d’aller plus loin avec la création d’un Réseau de Technicien en Ecologie (RTE), la mise en place d’une liste de diffusion et l’organisation régulière de rencontres entre membres du réseau

The GenTree Dendroecological Collection, tree-ring and wood density data from seven tree species across Europe

The dataset presented here was collected by the GenTree project (EU-Horizon 2020), which aims to improve the use of forest genetic resources across Europe by better understanding how trees adapt to their local environment. This dataset of individual tree-core characteristics including ring-width series and whole-core wood density was collected for seven ecologically and economically important European tree species: silver birch (Betula pendula), European beech (Fagus sylvatica), Norway spruce (Picea abies), European black poplar (Populus nigra), maritime pine (Pinus pinaster), Scots pine (Pinus sylvestris), and sessile oak (Quercus petraea). Tree-ring width measurements were obtained from 3600 trees in 142 populations and whole-core wood density was measured for 3098 trees in 125 populations. This dataset covers most of the geographical and climatic range occupied by the selected species. The potential use of it will be highly valuable for assessing ecological and evolutionary responses to environmental conditions as well as for model development and parameterization, to predict adaptability under climate change scenarios

The James Webb Space Telescope Mission

Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.Comment: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figure