264 research outputs found
A Novel Approach to Study the Variability of NGC 5548
Understanding the properties of the continuum radiation and broad emission lines of active galactic nuclei provides significant information not only to model the radiation mechanism and constrain the geometry and kinematics of the broad-line region (BLR) but also to probe the central engine of the sources. Here we investigate the multifractal behavior of the Hβ emission line and the 5100 Å continuum flux light curves of NGC 5548. The aim is to search for multiscaling signatures in the light curves and heck if there is a possible nonlinear relationship between them. To this end, we use a multifractality analysis technique called the Multifractal Detrended Moving Average analysis. We detect multifractal (nonlinear) signatures in the full monitoring and densely sampled period of the Hβ line and 5100 Å continuum light curves of NGC 5548, possibly indicating the presence of complex and nonlinear interaction in the 5100 Å continuum and Hβ emission line regions. Moreover, the degree of multifractality of the Hβ line is found to be about twice that of the 5100 Å continuum. The nonlinearity of both emissions could be generated when the BLR reprocesses the radiation from the central compact source. Finally, we found that antipersistent long-range temporal correlation is the main source of the multifractality detected in both light curves.We warmly thank the anonymous referee for valuable suggestions and comments. A.B. acknowledges a CAPES PhD fellowship. L.J.G. acknowledges support by the MINECO/AEI/FEDER-UE grant AYA2017-89815-P and the University of Cantabria
Developing logistic software platforms: e-market place, a case study
This paper describes a framework for software development with emphasis on logistics platforms. Specifically, a case study is presented regarding the Logport program in Colombia’s Caribbean coast. The software development is based on the merging of modeling, design, and agile development techniques aimed towards software production. The agile methodologies discussed herein include Scrum, XP, and Crystal among others, and specific verification and validation aspects of CMMI 1.3 are evaluated. Furthermore, the integration of emerging technologies including elastic computing in cloud computing that allows scaled integration, security, load balancing, process speed, and high concurrency among other features are discussed. Finally, the proposed solutions cover actual and emergent needs in a B2B or B2C electronic commerce dynamic environment where suppliers and clients offer and demand transport, storage, and customs services. In this environment, their goal is to ensure there is added value to their logistics processes starting at the inputs and all the way to the outputs of the commercial business processes. Colombia’s Caribbean region is one such multimodal and multiport environment in which there is constant demand for low cost, time and storage optimization, and customs reliability for the businesspersons of this region, which serves as a Hub for the American Caribbean
A neutralization assay for respiratory syncytial virus using a quantitative PCR-based endpoint assessment
Access to Water Source, Latrine Facilities and Other Risk Factors of Active Trachoma in Ankober, Ethiopia
Objective: This study aims to determine the prevalence and correlates of active trachoma in Ankober, Ethiopia. Methods: A cross-sectional community-based study was conducted during July 2007. A total of 507 children (ages 1–9 years), from 232 households were included in the study. All children were examined for trachoma by ophthalmic nurses using the WHO simplified clinical grading system. Interviews and observations were used to assess risk factors. Logistic regression procedures were used to determine associations between potential risk factors and signs of active trachoma. Results: Overall, the prevalence of active trachoma was found to be 53.9 % (95%CI 49.6%–58.2%). Presence of fly-eye (fly contact with the eyelid margin during eye examination) (Odds Ratio (OR) = 4.03 95 % CI 1.40–11.59), absence of facial cleanliness (OR = 7.59; 95%CI 4.60–12.52), an illiterate mother (OR = 5.88; 95%CI 2.10–15.95), lack of access to piped water (OR = 2.19; 95%CI 1.14–6.08), and lack of access to latrine facilities (OR = 4.36; 95%CI 1.49–12.74) were statistically significantly associated with increased risk of active trachoma. Conclusion: Active trachoma among children 1–9 years of age in Ankober is highly prevalent and significantly associated with a number of risk factors including access to water and latrine facilities. Trachoma prevention programs that include improved access to water and sanitation, active fly control, and hygiene education are recommended to lower the burde
Prevalence of tuberculous lymphadenitis in Gondar University Hospital, Northwest Ethiopia
Substrate Specificity within a Family of Outer Membrane Carboxylate Channels
Characterization of a large family of outer membrane channels from gram-negative bacteria suggest how they can thrive in nutrient-poor environments and how channel inactivation can contribute to antibiotic resistance
Microwave sensor system for continuous monitoring of adhesive curing processes
A microwave sensor system has been developed for monitoring adhesive curing processes. The system provides continuous, real-time information about the curing progress without interfering with the reaction. An open-coaxial resonator is used as the sensor head, and measurements of its resonance frequency and quality factor are performed during cure to follow the reaction progress. Additionally, the system provides other interesting parameters such as reaction rate or cure time. The adhesive dielectric properties can also be computed off-line, which gives additional information about the process. The results given by the system correlate very well with conventional measurement techniques such as differential scanning calorimetry, combining accuracy and rate with simplicity and an affordable cost. © 2012 IOP Publishing Ltd.The authors thank Rut Benavente Martinez for her assistance in the DSC experiments. The contract of BG-B is financed by the Ministry of Science and Innovation of Spain, through the 'Torres Quevedo' Sub-programme, which is also co-financed by the European Social Fund (ESF). This work has been financed by the Ministry of Science and Innovation of Spain through the project MONIDIEL (TEC2008-04109).GarcÃa Baños, B.; Catalá Civera, JM.; Penaranda-Foix, FL.; Canós MarÃn, AJ.; Sahuquillo Navarro, O. (2012). Microwave sensor system for continuous monitoring of adhesive curing processes. Measurement Science and Technology. 23(3). https://doi.org/10.1088/0957-0233/23/3/035101S233Jost, M., & Sernek, M. (2008). Shear strength development of the phenol–formaldehyde adhesive bond during cure. Wood Science and Technology, 43(1-2), 153-166. doi:10.1007/s00226-008-0217-2Costa, M. L., Botelho, E. C., Paiva, J. M. F. de, & Rezende, M. C. (2005). Characterization of cure of carbon/epoxy prepreg used in aerospace field. Materials Research, 8(3), 317-322. doi:10.1590/s1516-14392005000300016Chen, J., & Hojjati, M. (2007). Microdielectric analysis and curing kinetics of an epoxy resin system. Polymer Engineering & Science, 47(2), 150-158. doi:10.1002/pen.20687Sernek, M., & Kamke, F. A. (2007). Application of dielectric analysis for monitoring the cure process of phenol formaldehyde adhesive. International Journal of Adhesion and Adhesives, 27(7), 562-567. doi:10.1016/j.ijadhadh.2006.10.004Núñez, L., Gómez-Barreiro, S., Gracia-Fernández, C. A., & Núñez, M. R. (2004). Use of the dielectric analysis to complement previous thermoanalytical studies on the system diglycidyl ether of bisphenol A/1,2 diamine cyclohexane. Polymer, 45(4), 1167-1175. doi:10.1016/j.polymer.2003.12.024Lefebvre, D. R., Han, J., Lipari, J. M., Long, M. A., McSwain, R. L., & Wells, H. C. (2006). Dielectric analysis for in-situ monitoring of gelatin renaturation and crosslinking. Journal of Applied Polymer Science, 101(5), 2765-2775. doi:10.1002/app.21631Cordovez, M., Li, Y., & Karbhari, V. M. (2004). Assessment of Dielectrometry for Characterization of Processing and Moisture Absorption in FRP Composites. Journal of Reinforced Plastics and Composites, 23(4), 445-456. doi:10.1177/0731684404031980Das, N. K., Voda, S. M., & Pozar, D. M. (1987). Two Methods for the Measurement of Substrate Dielectric Constant. IEEE Transactions on Microwave Theory and Techniques, 35(7), 636-642. doi:10.1109/tmtt.1987.1133722Fioretto, D., Livi, A., Rolla, P. A., Socino, G., & Verdini, L. (1994). The dynamics of poly(n-butyl acrylate) above the glass transition. Journal of Physics: Condensed Matter, 6(28), 5295-5302. doi:10.1088/0953-8984/6/28/007Givot, B. L., Krupka, J., & Belete, D. Y. (s. f.). Split post dielectric resonator technique for dielectric cure monitoring of structural adhesives. 13th International Conference on Microwaves, Radar and Wireless Communications. MIKON - 2000. Conference Proceedings (IEEE Cat. No.00EX428). doi:10.1109/mikon.2000.913931Canos, A. J., Catala-Civera, J. M., Penaranda-Foix, F. L., & Reyes-Davo, E. (2006). A novel technique for deembedding the unloaded resonance frequency from measurements of microwave cavities. IEEE Transactions on Microwave Theory and Techniques, 54(8), 3407-3416. doi:10.1109/tmtt.2006.877833Marks, R. B., & Williams, D. F. (1992). A general waveguide circuit theory. Journal of Research of the National Institute of Standards and Technology, 97(5), 533. doi:10.6028/jres.097.024Harrington, R. F. (1967). Matrix methods for field problems. Proceedings of the IEEE, 55(2), 136-149. doi:10.1109/proc.1967.5433Baker-Jarvis, J., Janezic, M. D., Domich, P. D., & Geyer, R. G. (1994). Analysis of an open-ended coaxial probe with lift-off for nondestructive testing. IEEE Transactions on Instrumentation and Measurement, 43(5), 711-718. doi:10.1109/19.328897Taylor, B. N. (1994). Guidelines for evaluating and expressing the uncertainty of NIST measurement results. doi:10.6028/nist.tn.1297Casalini, R., Corezzi, S., Livi, A., Levita, G., & Rolla, P. A. (1997). Dielectric parameters to monitor the crosslink of epoxy resins. Journal of Applied Polymer Science, 65(1), 17-25. doi:10.1002/(sici)1097-4628(19970705)65:13.0.co;2-tPreu, H., & Mengel, M. (2007). Experimental and theoretical study of a fast curing adhesive. International Journal of Adhesion and Adhesives, 27(4), 330-337. doi:10.1016/j.ijadhadh.2006.06.004Harper, D. P., Wolcott, M. P., & Rials, T. G. (2001). Evaluation of the cure kinetics of the wood/pMDI bondline. International Journal of Adhesion and Adhesives, 21(2), 137-144. doi:10.1016/s0143-7496(00)00045-2Garcia-Banos, B., Canos, A. J., Penaranda-Foix, F. L., & Catala-Civera, J. M. (2011). Noninvasive Monitoring of Polymer Curing Reactions by Dielectrometry. IEEE Sensors Journal, 11(1), 62-70. doi:10.1109/jsen.2010.2050475He, Y. (2001). DSC and DEA studies of underfill curing kinetics. Thermochimica Acta, 367-368, 101-106. doi:10.1016/s0040-6031(00)00654-7Núñez-Regueira, L., Gracia-Fernández, C. A., & Gómez-Barreiro, S. (2005). Use of rheology, dielectric analysis and differential scanning calorimetry for gel time determination of a thermoset. Polymer, 46(16), 5979-5985. doi:10.1016/j.polymer.2005.05.06
- …