234 research outputs found

    Dialogues of an Urban Population with the Presence of Solid Waste thrown in the Open Air

    Get PDF
    Solid waste treatment is an everyday complex and challenging issue For this reason it becomes a permanent research theme and generates a specific vocabulary This study aims to clarify how an urban community deals with the domestic organic and non-organic waste and other undesirable or unpleasant materials in landfills sidewalks and streets The research is of analytical bibliographical and field type with data collected through structured and semi-structured questions asked to people living around vacant land with large garbage dumps The analyses are based on principles of environmental education It becomes evident that the population copes with the phenomenon although not adequately understanding the cycle of waste materials their treatment and their effects on the health The lack of solution uses to be associated to the lack of punishment On the other hand the cultural habit of throwing garbage in the vicinity of the houses is rooted in childhood It can be inferred that people look but do not see because of an automatic and embedded view of the landscape This automation needs to be shaken for higher consciousness towards solution A vocabulary with the potential of improving perception is generate

    Sistema de digitalização, detecção e classificação automática de recibos em dispositivos móveis

    Get PDF
    Ao longo dos últimos anos tem-se assistido a uma rápida evolução dos dispositivos móveis. Essa evolução tem sido mais intensa no poder de processamento, na resolução e qualidade das câmaras e na largura de banda das redes móveis de nova geração. Outro aspecto importante é o preço, pois cada vez mais existem dispositivos móveis avançados a um preço acessível, o que facilita a adopção destes equipamentos por parte dos utilizadores. Estes factores contribuem para que o número de utilizadores com “computadores de bolso” tenda a aumentar, possibilitando cada vez mais a criação de ferramentas com maior complexidade que tirem partido das características desses equipamentos. Existem muitas aplicações que exploram estas características para facilitar o trabalho aos utilizadores. Algumas dessas aplicações conseguem retirar informação do mundo físico e fazer algum tipo de processamento, como por exemplo, um leitor de códigos QR ou um OCR (Optical Character Recognizer). Aproveitando o potencial dos dispositivos móveis actuais, este trabalho descreve o estudo, a implementação e a avaliação de uma aplicação de realidade aumentada para adquirir e gerir recibos em papel de forma automática e inteligente. A aplicação utiliza a câmara do dispositivo para adquirir imagens dos recibos de forma a poder processá-las recorrendo a técnicas de processamento de imagem. Tendo uma imagem processada do recibo é efectuado um reconhecimento óptico de caracteres para extracção de informação e é utilizada uma técnica de classificação para atribuir uma classe ao documento. Para um melhor desempenho do classificador é utilizada uma estratégia de aprendizagem incremental. Após a correcta classificação é possível visualizar o recibo com informação adicional (realidade aumentada). O trabalho proposto inclui também a avaliação da interface e dos algoritmos desenvolvidos

    Enforcement das IAS/IFRS em Portugal: entidades envolvidas, mecanismos e matérias relevantes

    Get PDF
    Este estudo visa analisar o processo de harmonização contabilística e as medidas que asseguram o cumprimento ("enforcement") das normas internacionais de contabilidade. É feita a revisão de literatura, com ênfase no "enforcement" das normas e enquadramento das entidades/"stakeholders" participantes. É destacado o papel da Comissão de Mercados de Valores Mobiliários (CMVM) e do "European Securities and Markets Authority" (ESMA), analisando o seu trabalho e abordando as matérias destacadas no reporte financeiro e na revisão de contas. É elaborada uma base de documentos, sintetizando documentação essencial relacionada com o "enforcement" das normas, presentemente dispersa e difícil de relacionar. É abordado o novo panorama profissional dos Revisores Oficiais de Contas (ROCs), decorrente da apresentação de nova secção dedicada às matérias relevantes de auditoria (MRAs) na Certificação Legal de Contas (CLC) de Entidades de Interesse Público (EIPs). Para uma amostra de 40 entidades supervisionadas pela CMVM são analisadas as matérias mais recorrentes. Embora existam muitos artigos científicos sobre a harmonização e implementação das normas, há poucas referências às medidas e entidades envolvidas para garantir a sua correta aplicação. A nível nacional, a CMVM e os auditores são os principais intervenientes. A elaboração da base de documentos sugere a existência de grande dispersão de informação e falta de interação entre os organismos competentes em Portugal. Na União Europeia (UE) existe um fio condutor e ligações entre os organismos envolvidos. Da análise das CLCs de EIPs, conclui-se que tendem a enumerar matérias com elevado grau de subjetividade, alertando-se para a sua eventual falta de relevância.This study aims at analysing the accounting harmonization process and measures ensuring the enforcement of international accounting standards. The literature review focuses on the enforcement of standards and roles of the participating entities/stakeholders. The role of the Portuguese Securities Market Commission (CMVM) and the European Securities and Markets Authority (ESMA) is addressed, analysing its work and covering highlighted matters on financial reporting and auditing. Based on the compilation of essential documentation on enforcement of standards, currently dispersed and difficult to relate, a database of documents is presented for future reference. The new role played by the Portuguese Regulated Auditors (ROCs) is addressed in light of the mandatory section devoted to Key Audit Matters (MRAs) in Auditing reports for Public Interest Entities (EIPs). The most recurrent MRAs are analysed for a sample of 40 entities supervised by CMVM. Although there are many papers on harmonization and implementation of accounting standards, there is a lack of information regarding measures taken and involved entities in ensuring their correct usage. At the national level, CMVM and auditors are the major players. The creation of the documents’ database suggests a wide dispersion of information and lack of interaction between the competent organizations in Portugal. Within the European Union (UE) a common thread and links between the involved entities are in place. The analyses of Audit Reports for EIPs allow us to conclude that there seems to be a trend to highlight subjective matters, potentially leading to a lack of relevance

    Estudo do processo adaptativo em populações de Escherichia coli

    Get PDF
    Tese de mestrado, Biologia (Biologia Evolutiva e do Desenvolvimento), 2009, Universidade de Lisboa, Faculdade de CiênciasEmbora a ocorrência dos fenómenos evolutivos nas populações seja um facto conhecido, existem ainda aspectos deste processo que são importantes clarificar, nomeadamente em relação ao modo como a adaptação decorre. Uma possível abordagem consiste no seu estudo em tempo real, através de experiências de evolução experimental com a bactéria Escherichia coli, de modo a investigar a evolução da fitness e os factores importantes neste processo. Um dos objectivos deste trabalho pretende esclarecer de que forma o tamanho populacional efectivo influencia a adaptação de populações bacterianas ao meio. Para isso mediu-se a fitness relativa em ensaios de competição de populações adaptadas durante 2000 gerações com tamanhos populacionais efectivos distintos (Ne = 2 x 104 e Ne = 107). Através da comparação das medições de fitness às 1000 e 2000 gerações para os dois tipos de populações foi possível concluir que ambas estavam adaptadas e que as diferentes médias de fitness identificadas correspondiam ao nível máximo de adaptação atingido, que era significativamente maior nas populações grandes que nas pequenas. Outro objectivo consiste em tentar perceber de que forma os aumentos de fitness medidos em populações de Escherichia coli são sensíveis à alteração da forma da distribuição dos efeitos das mutações benéficas na fitness que surgem durante o processo adaptativo. Com recurso a simulações Monte-Carlo de evolução adaptativa de populações testaram-se diferentes combinações de parâmetros como a taxa de mutação benéfica, os seus efeitos na fitness e a forma da distribuição desses efeitos, comparando-se os dados gerados com os aumentos de fitness medidos experimentalmente. Os resultados demonstraram uma robustez dos dados práticos face à distribuição dos efeitos das mutações existentes na população, uma vez que nas diferentes distribuições as mutações de maior efeito assumidas como raras é que acabam por se fixar. Por outro lado procura-se estudar os estágios iniciais da compensação para o custo na fitness associado a uma mutação que confere resistência ao antibiótico estreptomicina, em condições de elevado tamanho populacional e num meio estruturado. Assim, populações mutantes foram propagadas em meio sólido e sem antibiótico durante 200 gerações e através de ensaios de competição determinou-se uma percentagem de compensação média de 50%. Também foram estimados os efeitos das mutações compensatórias, com um efeito médio de 4% e uma distribuição dos efeitos na fitness compatível com uma distribuição do tipo Gama. Não foram identificados revertentes, indicando assim que a compensação é um processo rápido e que ocorre frequentemente nas populações.Although occurrence of evolution is a well know fact, there are still some points about this process that are important to profound, like the way adaptation proceeds. As an approach to study adaptation, experimental evolution using Escherichia coli allows its observation in real time, in such a way that one can study fitness alterations and the several factors that influence this process. One main goal of this work is to understand the impact that population size has during bacterial adaptation. To investigate this, populations with two different effective sizes (Ne = 2,3x104 and Ne=107) were propagated in liquid medium during 2000 generations and their mean fitness was measured using competition assays. Through comparison of population mean fitness at 1000 and 2000 generations it could be concluded that, although both groups were adapted, the mean fitness value achieved by the small populations was statistically lower than the one obtain for the large populations. Another aim of this study is to investigate if the fitness increase observed after 1000 generations of E. coli adaptation is sensitive to changes in the shape of the distribution of fitness effects among beneficial mutations arising in populations during the adaptive process. In order to access this, Monte-Carlo simulations of adaptive evolution were performed, testing different parameters such as mutation rate of beneficial mutations, its mean fitness effect and shape of distribution of fitness effects. Simulations data was compared with the mean fitness increase measured in real populations. These results showed robustness of mean fitness measured in real populations, despite of the different distribution of fitness effects assumed. A last point intends to study the compensation for the fitness cost associated with a mutation conferring resistance to the antibiotic streptomycin, occurring in mutant populations growing in a structured medium with a high effective size. Independent mutant populations were propagated during 200 generations in solid medium in the absence of antibiotic and the relative fitness of individual clones was measured through competition assays. A mean compensation of 50% to the cost of the mutation was calculated and the fitness effects of the first compensatory mutations arising in the populations were investigated. A distribution compatible with a gamma was observed, with a mean fitness effect of 4%. No streptomycin sensitive revertants were identified during the course of the experiment, implying that compensation is a rapid process that commonly occurs in populations

    Melhoria do projeto e fabricação de dispositivos condutivos ou isolantes de AT

    Get PDF
    Nos postos de subestação é possível aumentar ou diminuir algumas grandezas elétricas, como a corrente ou tensão. Nestes locais essa operação é assegurada por transformadores e por forma a garantir a passagem de alta tensão para o seu interior, são utilizados isoladores de travessia. Apesar destes zelarem pela integridade dos materiais em contacto e passagem de tensão entre paredes, neste ambiente é comum originarem-se defeitos devido a descargas parciais. A reprodução mais comum das descargas parciais acontece quando o campo elétrico, no interior da peça, é superior ao campo de disrupção do material. Para evitar estes problemas, é necessário desenvolver métodos para os detetar. Conforme o isolador de travessia, para um sistema trifásico de tensão nominal 36 kV, produzido pela fábrica Indisol foi delineado o desenvolvimento de uma deteção do sinal das tensões a que o isolador está sujeito, por meio de uma cadeia resistiva. Para alcançar uma solução foram implementadas três tipologias de cadeias resistivas no interior do isolador de travessia, por um software de desenho. Estas foram estudadas através de um software de elementos finitos onde se fizeram simulações elétricas, com análise de duas grandezas (campo elétrico e diferença de potencial elétrico) em cenários normais e críticos. Esses cenários permitiram concluir que a geometria dos materiais dentro do isolador foi crucial para obter o melhor resultado. Nos resultados das simulações o isolador com a segunda cadeia resistiva destacou-se, no entanto, o modelo final correspondeu ao isolador com a terceira cadeia pela conjugação dos resultados e execução da sua montagem em fábrica. Pelos ensaios em fábrica observou-se que o modelo proposto teve uma boa resposta às descargas parciais e a sua estrutura mecânica foi aprovada, porém, não passou no ensaio do impulso a 170 kV (ensaio que certifica a comercialização do isolador). Todavia, como a tensão de falha (165 kV) está muito perto da tensão do ensaio, a peça será aplicável, com mínimas alterações futuras por parte da empresa e segundo as suas exigências

    Balanced Scorecard - Sistema de planeamento e gestão estratégica

    Get PDF
    A presente dissertação pretende descrever todo o desenvolvimento do projeto realizado no âmbito da unidade curricular de Tese/Dissertação/Estágio do Mestrado em Engenharia Informática, na área de especialização de Engenharia de Software. Este projeto pretende dar continuidade ao projeto realizado, pelo mesmo autor, no âmbito da unidade curricular de Projeto/Estágio da Licenciatura em Engenharia Informática, denominado “Desenvolvimento de uma aplicação Balanced Scorecard”. O Balanced Scorecard é um sistema de planeamento e gestão estratégica que tem como finalidade relacionar as atividades de uma organização com a sua visão e estratégia ao longo do tempo. Tendo por base quatro perspetivas, o Balanced Scorecard permite às organizações monitorizarem as suas atividades e objetivos, de forma a que estas avaliem o seu desempenho. Esta ferramenta pode tornar-se mais eficiente quando utilizada em conjunto com outras formas de análise consoante o tipo de atividades das organizações. Na solução inicial foi sugerido utilizar a análise de rentabilidade de projetos em conjunto com o Balanced Scorecard. Projetos estes, que poderiam ter como função atingir determinados objetivos definidos pelas organizações. O projeto apresentado ao longo deste documento pretende aprofundar a relação entre o sistema de avaliação de indicadores de desempenho pressuposto pelo sistema Balanced Scorecard e a análise de rentabilidade de projetos, demonstrando como estas duas ferramentas podem ser relacionadas numa única solução mais completa e que permita às organizações um melhor acompanhamento das suas atividades. No sentido de promover a usabilidade e eficiência de todo o sistema é ainda sugerido a utilização de mecanismos de apoio à decisão e como os integrar com a solução, no sentido de automatizar algumas das funcionalidades do mesmo permitindo uma simples e intuitiva utilização de todo o sistema.The present dissertation intends to describe all the development of the project carried out in the scope of the Thesis/Dissertation/Internship course of the Master’s in Informatics Engineering, in specialization of Software Engineering. This project intends to give continuity to the project carried out, by the same author, in the scope of the Project/Internship course of the Degree in Informatics Engineering, called “Development of a Balanced Scorecard application”. The Balanced Scorecard is a strategic planning and management system that aims to relate the activities of an organization to its vision and strategy over time. Based on four perspectives, the Balanced Scorecard allows organizations to monitor their activities and objectives to measure their performance. This tool can become more efficient when combined with other forms of analysis, depending on the type of activities of the organizations. In the initial solution, it was suggested to use project profitability analysis in combination with the Balanced Scorecard system. These projects, which could have as function to reach certain objectives defined by the organizations. The project presented throughout this document intends to deepen the relationship between the system evaluation of performance indicators presupposed by the Balanced Scorecard system and the analysis of the profitability of the projects, demonstrating how these two tools can be related in a more complete single solution that allows organizations to better monitor their activities. To promote usability and efficiency of the entire system, this project also suggests using decision support mechanisms and how to integrate them with the solution in order to automate some of the systems functionalities, allowing a simple and intuitive use of the whole system

    Small-sided games in the development of technical demands for young hockey goalkeepers

    Get PDF
    Introduction: Rink hockey motor learning and control needs deeply study to promote specific motor skills acquisition and knowledge about the game interaction. The complexity of the game suggest the fragmentation to increase the opportunities of interaction among young athletes. Problem Statement and Approach: The objective of this study was to analyse which game model allows for young goalkeepers to have more interventions with the ball and, consequently, a greater number of interactions on the game. Material and Methods: Our study consisted of 24 games analysed, divided in: 8 games in the 3x3model; 8 games in the 4x4model and 8 games in the 5x5 model. The 24 matches were equally divided in the levels of under 8 and under 10 years of age, with a total sample of 88 children. For data collection instrument we used the deferred observation method where we proceeded to a descriptive analysis of the data to find the means, standard deviation and totals of Goalkeeper’s Interventions (GKI). Comparisons were made between game models and athlete’s levels, using the Mann-Whitney and Kruskal -Wallis tests. Results: The results showed that, after the analysis of the total game actions, the 3x3 game model obtained a total of 168 GI actions (21±3,5; p=0,021), the 4x4 model obtained 132(16,50±5,18; p=0,020) and the 5x5 game model obtained 123GI actions(11±2,61; p=0,083). Discussion: According to the results, it was verified that there are statistically significant differences between the 3x3 game and the 5x5 game in the “Under 8” and when compared the small-sided game 4x4 to the formal game 5x5 in the “Under 10 level” in the games analysed we perceive that the small-sided game brings more actions to the game, namely in the actions that the goalkeepers show. Conclusions: The 3x3 game model obtained the highest number of goalkeeper’s actions in both under(and under10, suggesting benefits for improving the technical demands of these young rink hockey goalkeepers.info:eu-repo/semantics/publishedVersio

    Narrative and clinical change in Cognitive Behavior Therapy: a comparison of two recovered cases

    Get PDF
    Psychotherapy research suggests that therapeutic change is associated with the emergence and development of innovative moments (IMs)—that is, exceptions to the problematic self-narrative that brought the client to therapy. This study compares two recovered cases of major depression, according to symptom measures, that presented contrasting profiles of evolution of IMs: one typical of successful therapy (Barbara), and another typical of unsuccessful therapy (Claudia). The core conflictual relationship theme (CCRT) was used to study narrative change independently of the innovative moments coding system (IMCS). The results suggest a high congruence between the IMCS and the CCRT profiles. Although Barbara presented changes in the IMCS and the CCRT in a similar way, Claudia’s self-narratives (IMs and CCRT), despite symptom change, did not change. The results are discussed, considering the importance of narrative changes in recovery from depression and the maintenance of therapeutic gains.This article was supported by the Portuguese Foundation for Science and Technology (FCT), by the Grant PTDC/PSI-PCL/121525/2010 (Ambivalence and unsuccessful psychotherapy, 2012- 2015) and by the PhD Grant SFRH/BD/77324/2011. This study was conducted at Psychology Research Centre, University of Minho, and supported by the Portuguese Foundation for Science and Technology and the Portuguese Minister of Education and Science through national funds and when applicable co-financed by FEDER under the PT2020 Partnership Agreement (UID/PSI/01662/2013)

    Application of the front tracking method in micro flow measuring devices

    Get PDF
    18HLT08This work has the main objective to develop a calibration method for micro flow measuring devices based on the front tracking principle, in the Volume and Flow Laboratory (LVC) of the Portuguese Institute of Quality (IPQ), in a partnership with and the Department of Mechanical and Industrial Engineering (DEMI) of The New University of Lisbon under the project MeDD II – Metrology for Drug Delivery. The experimental setup consists of using a camera and Python software to track the distance traveled by the meniscus of a liquid inside a capillary tube and calculate the flow rate according to appropriated equations. Experimental tests using a flow generator and a flow meter were carried out for different flow rates. Two different setups with cameras of different specifications were tested. To validate the developed front tracking method, internal comparisons using a Nexus pump and a Sensirion meter were performed with the gravimetric and interferometric methods already implemented at LVC. The results obtained by these two comparisons were consistent. This new developed method can therefore be used to calibrate flow devices from 1000 μL/h down to 1 μL/h with an uncertainty value from 2% to 7% (k = 2). The calibration procedure is easy to apply and can be used for both syringe and flow meters. This method is simple to implement in a laboratory and the setup is relatively cheap compared to the gravimetric or interferometric method. Finally, the front tracking method was applied to the calibration of an implantable insulin pump used by diabetic patients.publishersversionpublishe

    Development of an experimental setup for micro flow measurement using the front tracking method

    Get PDF
    Funding Information: This work performed under 18HLT08 MeDDII project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme .This work has the main objective to develop a method for microflow measurement using the front tracking principle under the project MeDD II – Metrology for Drug Delivery. The experimental setup uses a high-resolution camera and an image processing software to track the distance travelled by the meniscus of a liquid in a capillary tube and calculate the flow rate. Experimental tests using a flow generator were carried out for different flow rates using two different cameras. To validate the developed front tracking method, an internal comparison was made with the gravimetric method in LVC. The results obtained by this comparison were consistent. This developed method can be used to calibrate flow devices down to 1 μL/h with an uncertainty value of 7% (k = 2).publishersversionpublishe
    corecore