17 research outputs found
Optical, structural, mechanical and thermal characterization of antioxidant ethylene vinyl alcohol copolymer films containing betalain-rich beetroot
New antioxidant films based on ethylene vinyl alcohol (EVOH) copolymer containing betalain-rich red beet were successfully manufactured and characterized to develop bioactive packaging for food products. Two types of red beet (powder and extract) at different proportions (0.1, 0.5, 1.0, 1.5, 2.0 and 2.5 % (w/w)) were incorporated into EVOH films, with attention focused on the optical, chemical, thermal, structural, and mechanical and antioxidant properties. The incorporation of any red beet type into EVOH resulted in purple-colored and semi-crystalline thin films, without modifying their thermal stability and mechanical properties. The addition of the beet extract led to a film with higher color intensity, antioxidant activity and lower water loss rate, whereas the addition of powdered beet resulted in an improved UV barrier compared to the extract. The results showed that new antioxidant food packaging films based on EVOH could be realized by utilizing beetroot extract or powder obtained from natural resources
Application of Citrus By-Products in the Production of Active Food Packaging
Some citrus by-products such as orange peel contains valuable compounds that could be recovered and restored into the food chain. In this study, an efficient valorization of orange peel has been investigated using green extraction, fractionation, and impregnation techniques. The first step included its extraction using CO2 and ethanol under different pressure (200-400 bar) and temperature (35-55 degrees C) conditions. The extracts obtained at 300 bar and 45 degrees C showed strong antioxidant with moderate antimicrobial activity. Then, the extract was subjected to a sequential fractionation process. The fraction obtained at 300 bar, 45 degrees C, and using 32% ethanol showed the strongest antioxidant and antimicrobial activity with a high extraction yield. Finally, the potential of the two best extracts (obtained at 400 bar and 45 degrees C before any fractionation and the fractions obtained at 300 bar, 45 degrees C using 32% ethanol) was determined by conducting an impregnation process to obtain an antioxidant food-grade rigid plastic that would preserve fresh food. The percentage of cosolvent (1 and 2% ethanol), the impregnation time (1 and 3 h), the pressure (200 and 400 bar), and the temperature (35 and 55 degrees C) were evaluated as variables of this process. The impregnated plastic showed good antioxidant and antimicrobial activitiesWe gratefully acknowledge the Spanish Ministry of Science and Technology (Project CTQ2014-52427-R) for its financial support through FEDER (European Funds for Regional Development)
Screening of the supercritical impregnation of olea europaea leaves extract into filaments of thermoplastic polyurethane (TPU) and polylactic acid (PLA) intended for biomedical applications
The leaves of Olea europaea as agricultural waste represent a convenient source of antioxi-dants. In combination with supercritical CO2 (scCO2), assisted impregnation is an interesting strategy for the preparation of biomedical devices with specific bioactivity. For this purpose, 3D-printable filaments of thermoplastic polyurethane (TPU) and polylactic acid (PLA) were employed for the supercritical impregnation of ethanolic olive leaves extract (OLE) for biomedical application. The extraction of OLE was performed using pressurized liquids. The effect of pressure (100–400 bar), temperature (35–55 °C), and the polymer type on the OLE impregnation and the swelling degree were studied including a morphological analysis and the measurement of the final antioxidant ac-tivity. All the studied variables as well as their interactions showed significant effects on the OLE loading. Higher temperatures favored the OLE loading while the pressure presented opposite effects at values higher than 250 bar. Thus, the highest OLE loadings were achieved at 250 bar and 55 °C for both polymers. However, TPU showed c.a. 4 times higher OLE loading and antioxidant activity in comparison with PLA at the optimal conditions. To the best of our knowledge, this is the first report using TPU for the supercritical impregnation of a natural extract with bioactivity.Fil: Machado, Noelia Daiana. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Cejudo Bastante, Cristina. Universidad de Cadiz. Facultad de Ciencias; EspañaFil: Goñi, Maria Laura. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Gañan, Nicolas Alberto. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Casas Cardoso, Lourdes. Universidad de Cadiz. Facultad de Ciencias; EspañaFil: Mantell Serrano, Casimiro. Universidad de Cadiz. Facultad de Ciencias; Españ
Supercritical Impregnation of Ketoprofen into Polylactic Acid for Biomedical Application: Analysis and Modeling of the Release Kinetic
Ketoprofen (KET) is an anti-inflammatory drug often used in medicine due to its analgesic and antipyretic effects. If it is administered in a controlled form by means of different dosing devices, it acts throughout the patient's recovery period improving its efficacy. This study intends to support the use of supercritical solvent impregnation (SSI) as an efficient technique to develop polylactic acid (PLA) functionalized with ketoprofen, for use as controlled drug release devices. For this purpose, firstly, the influence of different SSI variables on the desirable swelling of the polymer structure, while avoiding their foaming, were evaluated. Then, the resulting ketoprofen loading was evaluated under different pressure/temperature conditions. It was generally found that as pressure and temperature are higher, the drug impregnation loads also increase. The maximum impregnation loads (at about 9% KET/PLA) were obtained at 200 bar and 75 degrees C. In vitro drug release tests of the impregnated compound were also carried out, and it was found that drug release profiles were also dependent on the specific pressure and temperature conditions used for the impregnation of each polymer filament
Structural Modification of Polymers Functionalized with Mango Leaf Extract by Supercritical Impregnation: Approaching of Further Food and Biomedical Applications
Identifying new polymers from natural resources that can be effectively functionalized can have a substantial impact on biomedical devices and food preservation fields. Some of these polymers would be made of biodegradable, renewable and compostable materials, and present the kind of porosity required to effectively carry active compounds that confer on them the desired properties for their intended applications. Some natural extracts, such as mango leaf extract, have been proven to have high levels of antioxidant, antimicrobial or anti-inflammatory properties, making them good candidates for controlled-release applications. This work intends to investigate the supercritical impregnation of different types of polymers (ABS, PETG, TPU, PC and PCL) with mango leaf extract. The influence of temperature and pressure on the polymers' structure (swelling and foaming processes) and their different behaviors have been analyzed. Thus, TPU and PC experience minimal structural modifications, while PETG, PCL and ABS, on the other hand, suffer quite significant structural changes. TPU and PETG were selected as the representative polymers for each one of these behaviors to delve into mango leaf extract impregnation processes. The bioactive capacity of the extract is present in either impregnated polymer, with 25.7% antioxidant activity by TPU processed at 35 degrees C and 100 bar and 32.9% antioxidant activity by PETG impregnated at 75 degrees C and 400 ba
Application of a Natural Antioxidant from Grape Pomace Extract in the Development of Bioactive Jute Fibers for Food Packaging
There is an increasing demand for the use of new food packaging materials. In this study, natural jute fibers impregnated with a Petit Verdot Red Grape Pomace Extract (RGPE) was proposed as a new active food packaging material. Pressurized Liquid Extraction (PLE) and Enhanced Solvent Extraction (ESE) techniques were employed to obtain the bioactive RGPE. Afterward the supercritical solvent impregnation conditions to obtain RGPE-natural jute fibers were studied, by varying pressure, modifier percentage and dried RGPE mass. PLE technique offered the highest bioactive extract at 20 MPa, 55 degrees C, 1 h residence time using C2H5OH:H2O (1:1 v/v), providing an EC50 of 3.35 +/- 0.25 and antibacterial capacity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa (MIC of 12.0, 1.5 and 4.0 mg/mL RGPE respectively). The natural jute fibers impregnated with 3 mL of that RGPE (90 mg/mL) at 50 MPa and 55 degrees C generated the most efficient packing material with regards to its food preservation potential
Supercritical Impregnation of PLA Filaments with Mango Leaf Extract to Manufacture Functionalized Biomedical Devices by 3D Printing
Polylactic Acid (PLA) filaments impregnated with ethanolic mango leaves extract (MLE) with pharmacological properties were obtained by supercritical impregnation. The effects of pressure, temperature and amount of extract on the response variables, i.e., swelling, extract loading and bioactivity of the PLA filaments, were determined. The analysis of the filaments biocapacities revealed that impregnated PLA filaments showed 11.07% antidenaturant capacity and 88.13% antioxidant activity, which after a 9-day incubation shifted to 30.10% and 9.90%, respectively. Subsequently, the same tests were conducted on printed samples. Before their incubation, the printed samples showed 79.09% antioxidant activity and no antidenaturant capacity was detected. However, after their incubation, the antioxidant activity went down to only 2.50%, while the antidenaturant capacity raised up to 23.50%. The persistence of the bioactive properties after printing opens the possibility of using the functionalized PLA filaments as the feed for a three-dimensional (3D) printer.This work is part of a project granted by the Junta de Andalucia (P18-RT-3272) through its financing by the FEDER funds 2014-2020
Biobased films of nanocellulose and mango leaf extract for active food packaging: supercritical impregnation versus solvent casting
Antioxidant and antimicrobial free-standing films composed of nanofibrillated cellulose (NFC) and a polyphenolic-rich extract, viz. mango leaf extract (MLE), were produced via supercritical solvent impregnation (SSI) and conventional solvent casting film-processing methodologies. The CO2-assisted impregnation of NFC with MLE created robust films with thermal stability up to 250 °C, good mechanical performance (Young's modulus > 4.7 GPa), UV-light barrier properties, antioxidant capacity with maximum inhibition percentage of ca. 84%, and antimicrobial activity against Staphylococcus aureus (growth inhibition ≈ 37%) and Escherichia coli (growth inhibition ≈ 91%). The comparison of the NFC/MLE films prepared by SSI with those fabricated via solvent casting shows a clear advantage of the SSI methodology. Particularly, the antioxidant and antimicrobial activities are visibly higher in the films fabricated by the CO2-assisted impregnation of MLE into NFC. In fact, for the SSI films, the MLE components are mostly adsorbed at the surface and not in the bulk of the biopolymeric matrix, which translates into faster migrations and, hence, higher active properties. All these findings evinced the potential performance of the NFC/MLE films prepared by the eco-friendly SSI as UV-blocking, antioxidant, and antimicrobial bio-based materials for application as sustainable active food packaging.publishe
Potential Use of Annona Genus Plants Leaf Extracts to Produce Bioactive Transdermal Patches by Supercritical Solvent Impregnation
The objective of the present work was to develop a bioactive transdermal patch functionalized with Annona leaf extracts (ALE) by means of supercritical impregnation technique. The potential of six different Annona leaf extracts (ALE) obtained with the enhanced solvent system formed by carbon dioxide + ethanol/acetone was evaluated taking into account the antioxidant activity, total phenol composition and global extraction yields. For the impregnation of ALE, two drug supporting systems were tested: hydrocolloid sodium carboxymethyl cellulose (NaCMC) and polyester dressings (PD). The effect of the impregnation conditions, including pressure (P), temperature (T), percent of co-solvent (ethanol) and ALE/polymer mass ratio, was determined with regard to the loading and the functional activity of the impregnated samples. The optimal impregnation conditions of ALE were established at 55 degrees C and 300 bar which led to obtained transdermal patches with antioxidant and antimicrobial capacity. In order to understand the behavior of the process, the homogeneity of the samples in the vessels was also evaluated. The best results were obtained at higher proportions of co-solvent in the system.The authors would like to thank the research group in "The Institute for Mediterranean and Subtropical Horticulture La Mayora (IHSM)" (CSIC, Malaga, Spain) for providing the raw material and for their support. This research was funded by Junta de Andalucia-FEDER funds 2014-2020, project P18-RT-3272, the Spanish Ministry of Science and Technology, project CTQ2017-86661-R and the European Regional Development Fund(ERDF)
Evaluation of the Effect of Different Co-Solvent Mixtures on the Supercritical CO2 Extraction of the Phenolic Compounds Present in Moringa oleifera Lam. Leaves
Supercritical fluid extraction (SFE), using CO2, is a novel, sustainable and very efficient technique for the recovery of highly apolar compounds. However, the recovery of phenolic compounds requires the use of different co-solvent combinations such as water and ethanol to enhance the recovery of these compounds through the optimization of a number of variables. In this sense, the effect of pressure (100, 150 and 200 bar), temperature (50, 65 and 80 degrees C), extraction time (30, 60, 90, 120, 150 and 180 min) and the effect of the different percentages of ethanol and water as co-solvents on the composition and phenolic content of moringa leaf extracts were evaluated. Six major flavonoids were identified by ultra-high-performance liquid chromatography coupled to a quadrupole-time-of-flight mass spectrometer (UHPLC-Q-ToF-MS). Pressure and temperature had a significant effect on the phenolic composition of the extracts, as well as on their concentrations. The highest concentration of total flavonoids compounds (TFCs) was obtained by using a mixture of CO2 and water of 50:50 (v/v) at 100 bar, at 65 degrees C after a 120 min extraction time that produced a concentration of 11.66 mg +/- 0.02 mg TFC g(-1) sample, which corresponds to 89.0% of the total flavonoids of the sample, obtained by exhaustive extraction