Comparing infiltration rates in soils managed with conventional and alternative farming methods: A meta-analysis

Identifying agricultural practices that enhance water cycling is critical, particularly with increased rainfall variability and greater risks of droughts and floods. Soil infiltration rates offer useful insights to water cycling in farming systems because they affect both yields (through soil water availability) and other ecosystem outcomes (such as pollution and flooding from runoff). For example, conventional agricultural practices that leave soils bare and vulnerable to degradation are believed to limit the capacity of soils to quickly absorb and retain water needed for crop growth. Further, it is widely assumed that farming methods such as no-till and cover crops can improve infiltration rates. Despite interest in the impacts of agricultural practices on infiltration rates, this effect has not been systematically quantified across a range of practices. To evaluate how conventional practices affect infiltration rates relative to select alternative practices (no-till, cover crops, crop rotation, introducing perennials, crop and livestock systems), we performed a meta-analysis that included 89 studies with field trials comparing at least one such alternative practice to conventional management. We found that introducing perennials (grasses, agroforestry, managed forestry) or cover crops led to the largest increases in infiltration rates (mean responses of 59.2 ± 20.9% and 34.8 ± 7.7%, respectively). Also, although the overall effect of no-till was non-significant (5.7 ± 9.7%), the practice led to increases in wetter climates and when combined with residue retention. The effect of crop rotation on infiltration rate was non-significant (18.5 ± 13.2%), and studies evaluating impacts of grazing on croplands indicated that this practice reduced infiltration rates (-21.3 ± 14.9%). Findings suggest that practices promoting ground cover and continuous roots, both of which improve soil structure, were most effective at increasing infiltration rates

Effect of Conventional Mouthrinses on Initial Bioadhesion to Enamel and Dentin in situ

Aim: The study aimed to investigate the effect of a customary fluoride solution, containing sodium fluoride and amine fluoride, on initial biofilm formation on enamel and dentin in situ compared directly to chlorhexidine. Methods: Bovine enamel and dentin specimens were mounted on maxillary splints carried by 9 subjects. After 1 min of pellicle formation, rinses with tap water (control), chlorhexidine (meridol med CHX 0.2%, GABA) and a fluoride mouthrinse (elmex, GABA) were performed for 1 min. Subsequently, the slabs were carried for another 8 h. The adherent bacteria were determined by DAPI staining, live-dead staining and determination of colony-forming units after desorption; glucan formation was visualized with concanavalin A. Additionally, energy-dispersive X-ray spectroscopy (EDX) analysis of the in situ biofilm layers was conducted, and contact angle measurements were performed. Statistical evaluation was performed by means of the Kruskal-Wallis test followed by the Mann-Whitney U test (p < 0.05). Results: In the control group, significantly higher amounts of adherent bacteria were detected on dentin (4.8 x 10⁶ ± 5.4 x 10⁶ bacteria/cm²) than on enamel (1.2 x 10⁶ ± 1.5 x 10⁶ bacteria/cm² , DAPI). Chlorhexidine significantly reduced the amount of adherent bacteria (dentin: 2.8 x 10⁵ ± 3.4 x 10⁵ bacteria/cm² ; enamel: 4.2 x 10⁵ ± 8.7 x 10⁵ bacteria/cm²). Rinses with the fluoride solution also significantly reduced bacterial adherence to dentin (8.1 x 10⁵ ± 1.5 x 10⁶ bacteria/cm²). Fluoride could not be detected by EDX analysis of the biofilms. Fluoride mouthrinsing did not influence the wettability of the pellicle-covered enamel surface. Conclusion: In addition to the reduction of demineralization and antibacterial effects, fluorides inhibit initial biofilm formation on dental hard tissues considerably, especially on dentin

Dibenzo[hi,st]ovalene as Highly Luminescent Nanographene: Efficient Synthesis via Photochemical Cyclodehydroiodination, Optoelectronic Properties, and Single-Molecule Spectroscopy

Dibenzo[hi,st]ovalene (DBOV), as a new nanographene, has demonstrated promising optical properties, such as red emission with a high fluorescence quantum yield of 79% and stimulated emission, as well as high thermal stability and photostability, which indicated its promise as a light-emitting and optical gain material. However, the previous synthetic routes required at least 12 steps. This obstructed access to different derivatives, e.g., to obtain crystals suitable for X-ray diffraction analysis and to tune the optoelectronic properties. Here, we report an efficient synthetic pathway to DBOV based on a sequential iodination-benzannulation of bi(naphthylphenyl)diyne, followed by photochemical cyclodehydroiodination (PCDHI). This protocol included a fused bischrysene as a key intermediate and furnished scalable amounts of meso-substituted DBOV derivatives with different substituents. DBOV with 2,6-dimethylphenyl groups could be used for single-crystal X-ray analysis, revealing the precise structure of the DBOV core. The optoelectronic properties of the DBOV derivatives were investigated by UV-vis absorption and fluorescence spectroscopy, cyclic voltammetry, and density functional theory calculations. Single-molecule spectroscopy at room and low temperatures provided novel insights into the photophysics of DBOV embedded in a polymer film. As a result of weak coupling of the optical transitions to the matrix, single-molecule emission spectra at 4.5 K showed narrow vibronic lines. The fluorescence autocorrelation function covering 9 orders of magnitude in time displayed high contrast photon antibunching and bunching, from which the fluorescence decay rate and the triplet population and depopulation rates could be retrieved. Remarkably, the intersystem crossing rate into the triplet state decreased by more than an order of magnitude at low temperature, demonstrating that temperature can be a crucial parameter to boost single photon emission of an aromatic hydrocarbon

Neonatal brain-directed gene therapy rescues a mouse model of neurodegenerative CLN6 Batten disease

The neuronal ceroid lipofuscinoses (NCLs), more commonly referred to as Batten disease, are a group of inherited lysosomal storage disorders that present with neurodegeneration, loss of vision and premature death. There are at least 13 genetically distinct forms of NCL. Enzyme replacement therapies and pre-clinical studies on gene supplementation have shown promising results for NCLs caused by lysosomal enzyme deficiencies. The development of gene therapies targeting the brain for NCLs caused by defects in transmembrane proteins has been more challenging and only limited therapeutic effects in animal models have been achieved so far. Here, we describe the development of an adeno-associated virus (AAV)-mediated gene therapy to treat the neurodegeneration in a mouse model of CLN6 disease, a form of NCL with a deficiency in the membrane-bound protein CLN6. We show that neonatal bilateral intracerebroventricular injections with AAV9 carrying CLN6 increase lifespan by more than 90%, maintain motor skills and motor coordination and reduce neuropathological hallmarks of Cln6-deficient mice up to 23 months post vector administration. These data demonstrate that brain-directed gene therapy is a valid strategy to treat the neurodegeneration of CLN6 disease and may be applied to other forms of NCL caused by transmembrane protein deficiencies in the future

Generating Single Microwave Photons in a Circuit

Electromagnetic signals in circuits consist of discrete photons, though conventional voltage sources can only generate classical fields with a coherent superposition of many different photon numbers. While these classical signals can control and measure bits in a quantum computer (qubits), single photons can carry quantum information, enabling non-local quantum interactions, an important resource for scalable quantum computing. Here, we demonstrate an on-chip single photon source in a circuit quantum electrodynamics (QED) architecture, with a microwave transmission line cavity that collects the spontaneous emission of a single superconducting qubit with high efficiency. The photon source is triggered by a qubit rotation, as a photon is generated only when the qubit is excited. Tomography of both qubit and fluorescence photon shows that arbitrary qubit states can be mapped onto the photon state, demonstrating an ability to convert a stationary qubit into a flying qubit. Both the average power and voltage of the photon source are characterized to verify performance of the system. This single photon source is an important addition to a rapidly growing toolbox for quantum optics on a chip.Comment: 6 pages, 5 figures, hires version at http://www.eng.yale.edu/rslab/papers/single_photon_hires.pd

Laser-induced resonance shifts of single molecules self-coupled by a metallic surface

The spectral properties of single molecules placed near a metallic surface are investigated at low temperatures. Because of the high quality factor of the optical resonance, a laser-induced shift of the molecular lines is evidenced for the first time. The shift dependence on the laser excitation intensity and on the dephasing rate of the transition dipole is studied. A simple theoretical model of a laser-driven molecule self-coupled by a mirror is developed to qualitatively interpret the observations.Peer reviewedPhysic

In situ regeneration of retinal pigment epithelium by gene transfer of E2F2: a potential strategy for treatment of macular degenerations

The retinal pigment epithelium (RPE) interacts closely with photoreceptors to maintain visual function. In degenerative diseases such as Stargardt disease and age-related macular degeneration, the leading cause of blindness in the developed world, RPE cell loss is followed by photoreceptor cell death. RPE cells can proliferate under certain conditions, suggesting an intrinsic regenerative potential, but so far this has not been utilised therapeutically. Here, we used E2F2 to induce RPE cell replication and thereby regeneration. In both young and old (2 and 18 month) wildtype mice, subretinal injection of non-integrating lentiviral vector expressing E2F2 resulted in 47% of examined RPE cells becoming BrdU positive. E2F2 induced an increase in RPE cell density of 17% compared with control vector-treated and 14% compared with untreated eyes. We also tested this approach in an inducible transgenic mouse model of RPE loss, generated through activation of diphtheria toxin-A gene. E2F2 expression resulted in a 10-fold increase in BrdU uptake and a 34% increase in central RPE cell density. Although in mice this localised rescue is insufficiently large to be demonstrable by electroretinography, a measure of massed retinal function, these results provide proof-of-concept for a strategy to induce in situ regeneration of RPE for the treatment of RPE degeneration

PG545, a dual heparanase and angiogenesis inhibitor, induces potent anti-tumour and anti-metastatic efficacy in preclinical models

BACKGROUND: PG545 is a heparan sulfate (HS) mimetic that inhibits tumour angiogenesis by sequestering angiogenic growth factors in the extracellular matrix (ECM), thus limiting subsequent binding to receptors. Importantly, PG545 also inhibits heparanase, the only endoglycosidase which cleaves HS chains in the ECM. The aim of the study was to assess PG545 in various solid tumour and metastasis models