1,563 research outputs found
Electrical and Mechanical Properties of Plated Ni/Cu Contacts for Si Solar Cells
AbstractPlated Ni/Cu/Ag contacts are an industrially feasible metallization approach for high efficiency c-Si solar cells with low surface doping concentrations (1018 cm-3 < ND < 1020 cm-3). The 2d-simulations of this work define the minimum requirements on the contact resistivity of metal contacts in a high efficiency solar cell design. The following experimental study of the contact resistivity of plated Ni/Cu/Ag contacts on lowly doped phosphorus emitter demonstrates low contact resistivities in the mΩcm2 regime, which enable solar cells with high fill factors. Furthermore, the paper analyzes the influence of the thermal silicidation process on pseudo-fill factor losses and on the mechanical contact adhesion. The contact adhesion is also studied with respect to the laser contact opening process. The results of this work demonstrate that the right choice of back-end processes enable plated Ni/Cu/Ag contacts with low contact resistivities in combination with high contact adhesions above 1 N/mm
Microcharacterization of Interface Oxide Layer on Laser-Structured Silicon Surfaces of Plated Ni–Cu Solar Cells
Is geographical variation driving the transcriptomic responses to multiple stressors in the kelp Saccharina latissima
Background: Kelps (Laminariales, Phaeophyceae) are brown macroalgae of utmost ecological, and increasingly
economic, importance on temperate to polar rocky shores. Omics approaches in brown algae are still scarce and
knowledge of their acclimation mechanisms to the changing conditions experienced in coastal environments can
benefit from the application of RNA-sequencing.
Despite evidence of ecotypic differentiation, transcriptomic responses from distinct geographical locations have, to
our knowledge, never been studied in the sugar kelp Saccharina latissima so far.
Results: In this study we investigated gene expression responses using RNA-sequencing of S. latissima from
environments with contrasting temperature and salinity conditions – Roscoff, in temperate eastern Atlantic, and
Spitsbergen in the Arctic. Juvenile sporophytes derived from uniparental stock cultures from both locations were
pre-cultivated at 8 °C and SA 30. Sporophytes acclimated to 0 °C, 8 °C and 15 °C were exposed to a low salinity
treatment (SA 20) for 24 h. Hyposalinity had a greater impact at the transcriptomic level than the temperature alone,
and its effects were modulated by temperature. Namely, photosynthesis and pigment synthesis were extensively
repressed by low salinity at low temperatures. Although some responses were shared among sporophytes from the
different sites, marked differences were revealed by principal component analysis, differential expression and GO
enrichment. The interaction between low temperature and low salinity drove the largest changes in gene
expression in sporophytes from Roscoff while specimens from Spitsbergen required more metabolic adjustment at
higher temperatures. Moreover, genes related to cell wall adjustment were differentially expressed between
Spitsbergen and Roscoff control samples.
Conclusions: Our study reveals interactive effects of temperature and salinity on transcriptomic profiles in S.
latissima. Moreover, our data suggest that under identical culture conditions sporophytes from different locations
diverge in their transcriptomic responses. This is probably connected to variations in temperature and salinity in
their respective environment of origin. The current transcriptomic results support the plastic response pattern in
sugar kelp which is a species with several reported ecotypes. Our data provide the baseline for a better
understanding of the underlying processes of physiological plasticity and may help in the future to identify strains
adapted to specific environments and its genetic control
Classical homeopathy in the treatment of cancer patients - a prospective observational study of two independent cohorts
BACKGROUND: Many cancer patients seek homeopathy as a complementary therapy. It has rarely been studied systematically, whether homeopathic care is of benefit for cancer patients.
METHODS: We conducted a prospective observational study with cancer patients in two differently treated cohorts: one cohort with patients under complementary homeopathic treatment (HG; n = 259), and one cohort with conventionally treated cancer patients (CG; n = 380). For a direct comparison, matched pairs with patients of the same tumour entity and comparable prognosis were to be formed. Main outcome parameter: change of quality of life (FACT-G, FACIT-Sp) after 3 months. Secondary outcome parameters: change of quality of life (FACT-G, FACIT-Sp) after a year, as well as impairment by fatigue (MFI) and by anxiety and depression (HADS).
RESULTS: HG: FACT-G, or FACIT-Sp, respectively improved statistically significantly in the first three months, from 75.6 (SD 14.6) to 81.1 (SD 16.9), or from 32.1 (SD 8.2) to 34.9 (SD 8.32), respectively. After 12 months, a further increase to 84.1 (SD 15.5) or 35.2 (SD 8.6) was found. Fatigue (MFI) decreased; anxiety and depression (HADS) did not change. CG: FACT-G remained constant in the first three months: 75.3 (SD 17.3) at t0, and 76.6 (SD 16.6) at t1. After 12 months, there was a slight increase to 78.9 (SD 18.1). FACIT-Sp scores improved significantly from t0 (31.0 - SD 8.9) to t1 (32.1 - SD 8.9) and declined again after a year (31.6 - SD 9.4). For fatigue, anxiety, and depression, no relevant changes were found. 120 patients of HG and 206 patients of CG met our criteria for matched-pairs selection. Due to large differences between the two patient populations, however, only 11 matched pairs could be formed. This is not sufficient for a comparative study.
CONCLUSION: In our prospective study, we observed an improvement of quality of life as well as a tendency of fatigue symptoms to decrease in cancer patients under complementary homeopathic treatment. It would take considerably larger samples to find matched pairs suitable for comparison in order to establish a definite causal relation between these effects and homeopathic treatment
Importance of prostate volume in the European Randomised Study of Screening for Prostate Cancer (ERSPC) risk calculators: results from the prostate biopsy collaborative group
OBJECTIVES: To compare the predictive performance and potential clinical usefulness of risk calculators of the European Randomized Study of Screening for Prostate Cancer (ERSPC RC) with and without information on prostate volume. METHODS: We studied 6 cohorts (5 European and 1 US) with a total of 15,300 men, all biopsied and with pre-biopsy TRUS measurements of prostate volume. Volume was categorized into 3 categories (25, 40, and 60 cc), to reflect use of digital rectal examination (DRE) for volume assessment. Risks of prostate cancer were calculated according to a ERSPC DRE-based RC (including PSA, DRE, prior biopsy, and prostate volume) and a PSA + DRE model (including PSA, DRE, and prior biopsy). Missing data on prostate volume were completed by single imputation. Risk predictions were evaluated with respect to calibration (graphically), discrimination (AUC curve), and clinical usefulness (net benefit, graphically assessed in decision curves). RESULTS: The AUCs of the ERSPC DRE-based RC ranged from 0.61 to 0.77 and were substantially larger than the AUCs of a model based on only PSA + DRE (ranging from 0.56 to 0.72) in each of the 6 cohorts. The ERSPC DRE-based RC provided net benefit over performing a prostate biopsy on the basis of PSA and DRE outcome in five of the six cohorts. CONCLUSIONS: Identifying men at increased risk for having a biopsy detectable prostate cancer should consider multiple factors, including an estimate of prostate volume
Design of a peptide-based vector, PepFect6, for efficient delivery of siRNA in cell culture and systemically in vivo
While small interfering RNAs (siRNAs) have been rapidly appreciated to silence genes, efficient and non-toxic vectors for primary cells and for systemic in vivo delivery are lacking. Several siRNA-delivery vehicles, including cell-penetrating peptides (CPPs), have been developed but their utility is often restricted by entrapment following endocytosis. Hence, developing CPPs that promote endosomal escape is a prerequisite for successful siRNA implementation. We here present a novel CPP, PepFect 6 (PF6), comprising the previously reported stearyl-TP10 peptide, having pH titratable trifluoromethylquinoline moieties covalently incorporated to facilitate endosomal release. Stable PF6/siRNA nanoparticles enter entire cell populations and rapidly promote endosomal escape, resulting in robust RNAi responses in various cell types (including primary cells), with minimal associated transcriptomic or proteomic changes. Furthermore, PF6-mediated delivery is independent of cell confluence and, in most cases, not significantly hampered by serum proteins. Finally, these nanoparticles promote strong RNAi responses in different organs following systemic delivery in mice without any associated toxicity. Strikingly, similar knockdown in liver is achieved by PF6/siRNA nanoparticles and siRNA injected by hydrodynamic infusion, a golden standard technique for liver transfection. These results imply that the peptide, in addition to having utility for RNAi screens in vitro, displays therapeutic potential
Engineering of III-nitride semiconductors on low temperature Co-fired ceramics
This work presents results in the field of advanced substrate solutions in order to achieve high crystalline quality group-III nitrides based heterostructures for high frequency and power devices or for sensor applications. With that objective, Low Temperature Co-fired Ceramics has been used, as a non-crystalline substrate. Structures like these have never been developed before, and for economic reasons will represent a groundbreaking material in these fields of Electronic. In this sense, the report presents the characterization through various techniques of three series of specimens where GaN was deposited on this ceramic composite, using different buffer layers, and a singular metal-organic chemical vapor deposition related technique for low temperature deposition. Other single crystalline ceramic-based templates were also utilized as substrate materials, for comparison purposes
Effectiveness of an intensive care telehealth programme to improve process quality (ERIC): a multicentre stepped wedge cluster randomised controlled trial
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector,
consisting of silicon pixel, silicon strip and transition radiation
sub-detectors, will be replaced with an all new 100 % silicon tracker, composed
of a pixel tracker at inner radii and a strip tracker at outer radii. The
future ATLAS strip tracker will include 11,000 silicon sensor modules in the
central region (barrel) and 7,000 modules in the forward region (end-caps),
which are foreseen to be constructed over a period of 3.5 years. The
construction of each module consists of a series of assembly and quality
control steps, which were engineered to be identical for all production sites.
In order to develop the tooling and procedures for assembly and testing of
these modules, two series of major prototyping programs were conducted: an
early program using readout chips designed using a 250 nm fabrication process
(ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm
processing (ABC130 and HCC130 chips). This second generation of readout chips
was used for an extensive prototyping program that produced around 100
barrel-type modules and contributed significantly to the development of the
final module layout. This paper gives an overview of the components used in
ABC130 barrel modules, their assembly procedure and findings resulting from
their tests.Comment: 82 pages, 66 figure
- …