4,120 research outputs found
Flaw IdeNtification Through The Application Of Loading (FINAL)
The teardown and inspection of aircraft, which have completed a significant period of service, is a central requirement of many Aircraft Structural Integrity Management Plans (ASIMP). The reasons for this include a need to inspect for the potential onset of wide spread fatigue damage and to assess the impact of corrosion and in-service mechanical damage. Furthermore, service life data from fleet aircraft are required to confirm laboratory fatigue test results and substantiate the assumptions made during safe-life calculations or probabilistic risk and reliability studies. A teardown and inspection of the fracture critical F/A-18 wing attachment bulkheads (or centre barrel - CB) has been initiated to achieve these goals for the RAAF's F/A-18 fleet. Use is being made of ex-service CBs supplied from the Canadian Forces and U.S. Navy (USN) CB replacement programs. Investigations suggest that the largest 'likely' cracks in the critical bulkheads will be less than 1 mm deep at the time a CB is replaced. Since the detectable crack depth threshold for current NDI (using high frequency eddy current (HFEC) detection) is 1.0 mm or greater, these cracks may not be found. To significantly improve the probability of detecting cracks that are below the lower threshold of NDI, an increase in their size by accelerated fatigue testing of the CBs has been implemented. Cyclic loads (using the mini-FALSTAFF spectrum) are applied to the wing attachment lugs of ex-service CBs in a test rig to simulate in-flight wing loads. The loading is of sufficient magnitude and duration to ensure that any existing cracks will be grown to a size that ensures their detection under laboratory conditions. Quantitative fractography has been performed on observed cracking to obtain crack growth data and to determine the size, nature and cause of discontinuities that initiate fatigue cracking. This paper will provide a summary of the teardown philosophy, methodology and preliminary results
Economic burden of antibiotic resistance: how much do we really know?
AbstractThe declining effectiveness of antibiotics imposes potentially large health and economic burdens on societies. Quantifying the economic outcomes of antibiotic resistance effectively can help policy-makers and healthcare professionals to set priorities, but determining the actual effect of antibiotic resistance on clinical outcomes is a necessary first step. In this article, we review and discuss the contributions and limitations of studies that estimate the disease burden attributable to antibiotic resistance and studies that estimate the economic burden of resistance. We also consider other factors that are important in a comprehensive approach to evaluating the economic burden of antibiotic resistance
Control and reduction of unsteady pressure loads in separated shock wave turbulent boundary layer interaction
The focus was on developing means of controlling and reducing unsteady pressure loads in separated shock wave turbulent boundary layer interactions. Section 1 describes how vortex generators can be used to effectively reduce loads in compression ramp interaction, while Section 2 focuses on the effects of 'boundary-layer separators' on the same interaction
The Effectiveness Of Repairing Fatigue Damaged 7050 Aluminium Alloy Using Shot Peening
Shot peening is an effective life extension surface treatment process. In this study, experiments were performed to investigate whether shot peening could be used to recover the fatigue resistance of aluminium alloy 7050 that has experienced prior fatigue damage. The results showed that shot peening may be used for restoring the original fatigue life of the material, but the effectiveness strongly depends on the amount of prior damage (e.g. the crack depth of any cracks that have already formed) in the material. A numerical model was established and the effect of residual stress was incorporated into the model. The prediction by the model agreed well with the experimental results in terms of trend
Photonic qubits, qutrits and ququads accurately prepared and delivered on demand
Reliable encoding of information in quantum systems is crucial to all
approaches to quantum information processing or communication. This applies in
particular to photons used in linear optics quantum computing (LOQC), which is
scalable provided a deterministic single-photon emission and preparation is
available. Here, we show that narrowband photons deterministically emitted from
an atom-cavity system fulfill these requirements. Within their 500 ns coherence
time, we demonstrate a subdivision into d time bins of various amplitudes and
phases, which we use for encoding arbitrary qu-d-its. The latter is done
deterministically with a fidelity >95% for qubits, verified using a newly
developed time-resolved quantum-homodyne method.Comment: 5 pages, 4 figure
On the USAF ‘risk of failure’ approach and its applicability to composite repairs to metal airframes
The USAF report on the risk analysis of aging aircraft fleets notes that the operational life of individual airframes is seldom equal to the design life of the fleet and that the life of an aircraft fleet t ends to be determined more by its inherent operational capability and maintenance costs rather than by the number of flight hours specified at the design stage. As such this paper focuses on whether the USAF approach to risk assessment can be used for airf rames repaired with a composite patch/doubler. To this end the present paper describes a test program designed to study the effect of adhesively -bonded composite repairs to fatigue cracks that, prior to repair, have grown from small naturally -occurring mat erials discontinuities. This study reveals that crack growth in composite repairs conforms to the exponential growth equation used in the USAF approach to assessing the risk of failure. Furthermore, the exponent, ω, in the exponential growth law can be de termined from the crack growth history associated with the unrepaired specimens and the simple reduction in the stress due to the application of the composite patch/doubler, using the ‘cubic rule’ that was previously used to assess crack growth in the RAAF F/A -18 (Hornet) fleet
Optically trapped atom interferometry using the clock transition of large Rb-87 Bose-Einstein condensates
We present a Ramsey-type atom interferometer operating with an optically
trapped sample of 10^6 Bose-condensed Rb-87 atoms. The optical trap allows us
to couple the |F =1, mF =0>\rightarrow |F =2, mF =0> clock states using a
single photon 6.8GHz microwave transition, while state selective readout is
achieved with absorption imaging. Interference fringes with contrast
approaching 100% are observed for short evolution times. We analyse the process
of absorption imaging and show that it is possible to observe atom number
variance directly, with a signal-to-noise ratio ten times better than the
atomic projection noise limit on 10^6 condensate atoms. We discuss the
technical and fundamental noise sources that limit our current system, and
outline the improvements that can be made. Our results indicate that, with
further experimental refinements, it will be possible to produce and measure
the output of a sub-shot-noise limited, large atom number BEC-based
interferometer.
In an addendum to the original paper, we attribute our inability to observe
quantum projection noise to the stability of our microwave oscillator and
background magnetic field. Numerical simulations of the Gross-Pitaevskii
equations for our system show that dephasing due to spatial dynamics driven by
interparticle interactions account for much of the observed decay in fringe
visibility at long interrogation times. The simulations show good agreement
with the experimental data when additional technical decoherence is accounted
for, and suggest that the clock states are indeed immiscible. With smaller
samples of 5 \times 10^4 atoms, we observe a coherence time of {\tau} =
(1.0+0.5-0.3) s.Comment: 22 pages, 6 figures Addendum: 11 pages, 6 figure
Two snapshots reinforcing systemic thinking and responsibility
Purpose – This paper aims to explore the concept of sustainable development through the lens of two United Nations (UN) publications, Our Common Future (1987) and the 25-year update Resilient People: Resilient Planet (2012). The analysis attempts to highlight how sustainable development requires a systemic understanding and this in turn necessitates an imperative of responsibility. To reinforce its case, the paper highlights how sustainable development has never been about saving the environment and to think so is naıve. In the final analysis, the paper outlines how a systemic understanding is a key concern for organisational leaders and in turn a responsible understanding of humanity’s entwinement with, rather than separation from, all that surrounds us. Design/methodology/approach – This paper is a discussion paper that weaves together existing literature. Findings – The aim of the paper is to reinforce systemic thinking and an imperative of responsibility. Practical implications – The arguments offered highlight how systemic thinking and the associated responsibility that comes with this view are necessary for realising sustainable outcomes. Originality/value – Weaving together and reinforcing arguments that highlight systemic thinking and responsibility
Rheological Droplet Interface Bilayers (rheo-DIBs): Probing the Unstirred Water Layer Effect on Membrane Permeability via Spinning Disk Induced Shear Stress
A new rheological droplet interface bilayer (rheo-DIB) device is presented as a tool to apply shear stress on biological lipid membranes. Despite their exciting potential for affecting high-throughput membrane translocation studies, permeability assays conducted using DIBs have neglected the effect of the unstirred water layer (UWL). However as demonstrated in this study, neglecting this phenomenon can cause significant underestimates in membrane permeability measurements which in turn limits their ability to predict key processes such as drug translocation rates across lipid membranes. With the use of the rheo-DIB chip, the effective bilayer permeability can be modulated by applying shear stress to the droplet interfaces, inducing flow parallel to the DIB membranes. By analysing the relation between the effective membrane permeability and the applied stress, both the intrinsic membrane permeability and UWL thickness can be determined for the first time using this model membrane approach, thereby unlocking the potential of DIBs for undertaking diffusion assays. The results are also validated with numerical simulations
- …