396 research outputs found
Random error propagation and uncertainty analysis in the dynamic characterization of Tilting Pad Journal Bearings
In this work a new statistical method for the determination of the dynamic coefficients of Tilting Pad Journal Bearings is described. The method is applied to the results obtained testing a 5 pads tilting pad journal bearing with 280 mm diameter. Tests were performed on an advanced experimental apparatus specifically realized for investigations on large size high performance bearings for turbomachinery. The linear coefficient identification procedure is based on the dynamic measurement of forces, accelerations and relative displacements of rotor and bearing, as function of excitation frequency for different operating conditions. The post-processing of the dynamic data is performed in the frequency domain using the Fast Fourier Transform. Along with a description of the experimental test and identification procedure, this paper presents a least-square minimization technique for determining the dynamic coefficients and a bootstrap statistical technique for estimating their confidence intervals
The stochastic quantization method and its application to the numerical simulation of volcanic conduit dynamics under random conditions
Stochastic Quantization (SQ) is a method for the approximation of a continuous probability distribution with a discrete one. The proposal made in this paper is to apply this technique to reduce the number of numerical simulations for systems with uncertain inputs, when estimates of the output distribution are needed. This question is relevant in volcanology, where realistic simulations are very expensive and uncertainty is always present. We show the results of a benchmark test based on a one-dimensional steady model of magma flow in a volcanic conduit
Detecting massive scalar fields with Extreme Mass-Ratio Inspirals
We study the imprint of light scalar fields on gravitational waves from
extreme mass ratio inspirals -- binary systems with a very large mass
asymmetry. We first show that, to leading order in the mass ratio, any effects
of the scalar on the waveform are captured fully by two parameters: the mass of
the scalar and the scalar charge of the secondary compact object. We then use
this theory-agnostic framework to show that the future observations by LISA
will be able to simultaneously measure both of these parameters with enough
accuracy to detect ultra-light scalars.Comment: 11 pages, 7 figure
The benefits of co-location in primary care practices: The perspectives of general practitioners and patients in 34 countries
Background: There is no clear evidence as to whether the co-location of primary care professionals in the same facility positively influences their way of working and the quality of healthcare as perceived by patients. The aim of this study was to identify the relationships between general practitioner (GP) co-location with other GPs and/or other professionals and the GP outcomes and patients' experiences. Methods: We wanted to test whether GP co-location is related to a broader range of services provided, the use of clinical governance tools and inter-professional collaboration, and whether the patients of co-located GPs perceive a better quality of care in terms of accessibility, comprehensiveness and continuity of care with their GPs. The source of data was the QUALICOPC study (Quality and Costs of Primary Care in Europe), which involved surveys of GPs and their patients in 34 countries, mostly in Europe. In order to study the relationships between GP co-location and both GPs' outcomes and patients' experience, multilevel linear regression analysis was carried out. Results: The GP questionnaire was filled in by 7183 GPs and the patient experience questionnaire by 61,931 patients. Being co-located with at least one other professional is the most common situation of the GPs involved in the study. Compared with single-handed GP practices, GP co-location are positively associated with the GP outcomes. Considering the patients' perspective, comprehensiveness of care has the strongest negative relationship of GP co-location of all the dimensions of patient experiences analysed. Conclusions: The paper highlights that GP mono- and multi-disciplinary co-location is related to positive outcomes at a GP level, such as a broader provision of technical procedures, increased collaboration among different providers and wider coordination with secondary care. However, GP co-location, particularly in a multidisciplinary setting, is related to less positive patient experiences, especially in countries with health systems characterised by a weak primary care structure
error analysis in the determination of the dynamic coefficients of tilting pad journal bearings
n/
A numerical code for the simulation of magma-rocks dynamics
We present a numerical code for the simulation of the dynamics of compressible to
incompressible, multicomponent ows, based on the _nite element algorithm by Hauke & Hughes (1998). Balance equations for mass, momentum, energy and composition are solved with space-time Galerkin least-squares and discontinuity-capturing stabilizing
techniques. The code is used to study the dynamics of convection and mixing in magmatic
systems such as replenishment of magma chambers and volcanic conduits, and it reveals the occurrence of previously not described processes. The uid-structure interaction of fully coupled magma-rock dynamics is being implemented by using the deforming-spatial domain method by Tezduyar (2006), that intrinsecally includes moving meshes
Two dimensional SU(N)xSU(N) Chiral Models on the Lattice (II): the Green's Function
Analytical and numerical methods are applied to principal chiral models on a
two-dimensional lattice and their predictions are tested and compared. New
techniques for the strong coupling expansion of SU(N) models are developed and
applied to the evaluation of the two-point correlation function. The
momentum-space lattice propagator is constructed with precision O(\beta^{10})
and an evaluation of the correlation length is obtained for several different
definitions. Three-loop weak coupling contributions to the internal energy and
to the lattice and functions are evaluated for all N, and the
effect of adopting the ``energy'' definition of temperature is computed with
the same precision. Renormalization-group improved predictions for the
two-point Green's function in the weak coupling ( continuum ) regime are
obtained and successfully compared with Monte Carlo data. We find that strong
coupling is predictive up to a point where asymptotic scaling in the energy
scheme is observed. Continuum physics is insensitive to the effects of the
large N phase transition occurring in the lattice model. Universality in N is
already well established for and the large N physics is well
described by a ``hadronization'' picture.Comment: Revtex, 37 pages, 16 figures available on request by FAX or mai
Extreme mass-ratio inspirals as probes of scalar fields: Eccentric equatorial orbits around Kerr black holes
We study binary systems in which a stellar mass compact object spirals into a massive black hole, known as extreme mass ratio inspirals, in scenarios with a new fundamental scalar field. Earlier work has shown that, in most interesting such scenarios and to leading order in the mass ratio, the massive black holes can be adequately approximated by the Kerr metric and the imprint of the scalar field on the waveform is fully controlled by the scalar charge of the stellar mass object. Here we use this drastic simplification in the inspiral modeling and consider eccentric equatorial orbits. We study how the scalar charge affects the orbital evolution for different eccentricities and different values of the black hole spin. We then determine how changes in the orbital evolution get imprinted on the waveform and assess LISA's capability to detect or constrain the scalar charge
Low-Cost 3D Devices and Laser Scanners Comparison for the Application in Orthopaedic Centres
Low-cost 3D sensors are nowadays widely diffused and many different solutions are available on the market. Some of these devices were developed for entertaining purposes, but are used also for acquisition and processing of different 3D data with the aim of documentation, research and study. Given the fact that these sensors were not developed for this purpose, it is necessary to evaluate their use in the capturing process. This paper shows a preliminary research comparing the Kinect 1 and 2 by Microsoft, the Structure Sensor by Occipital and the O&P Scan by Rodin4D in a medical scenario (i.e. human body scans). In particular, these sensors were compared to Minolta Vivid 9i, chosen as reference because of its higher accuracy. Different test objects were analysed: a calibrated flat plane, for the evaluation of the systematic distance error for each device, and three different parts of a mannequin, used as samples of human body parts. The results showed that the use of a certified flat plane is a good starting point in characterizing the sensors, but a complete analysis with objects similar to the ones of the real context of application is required. For example, the Kinect 2 presented the best results among the low-cost sensors on the flat plane, while the Structure Sensor was more reliable on the mannequin parts
4D Reconstruction and Visualization of Cultural Heritage: Analysing our Legacy Through Time
Temporal analyses and multi-temporal 3D reconstruction are fundamental for the preservation and maintenance of all forms of Cultural Heritage (CH) and are the basis for decisions related to interventions and promotion. Introducing the fourth dimension of time into three-dimensional geometric modelling of real data allows the creation of a multi-temporal representation of a site. In this way, scholars from various disciplines (surveyors, geologists, archaeologists, architects, philologists, etc.) are provided with a new set of tools and working methods to support the study of the evolution of heritage sites, both to develop hypotheses about the past and to model likely future developments. The capacity to “see” the dynamic evolution of CH assets across different spatial scales (e.g. building, site, city or territory) compressed in diachronic model, affords the possibility to better understand the present status of CH according to its history. However, there are numerous challenges in order to carry out 4D modelling and the requisite multi-data source integration. It is necessary to identify the specifications, needs and requirements of the CH community to understand the required levels of 4D model information. In this way, it is possible to determine the optimum material and technologies to be utilised at different CH scales, as well as the data management and visualization requirements. This manuscript aims to provide a comprehensive approach for CH time-varying representations, analysis and visualization across different working scales and environments: rural landscape, urban landscape and architectural scales. Within this aim, the different available metric data sources are systemized and evaluated in terms of their suitability
- …