The impact of policies on the division of labour : a new approach

There are considerable differences between most European countries in respect both of the division of labour within families and the policies that seek to influence that division. These policies are based, implicitly or explicitly, on assumptions about what constitutes an effective policy measure. However, little is known about how to measure the effects of such policies on the division of labour. Moreover, the emergence of a supranational political entity, i.e. the European Union, requires a new approach to the evaluation of national policies. In this article, the authors put forward a theoretical framework to be used in an international study of the effects of policies on the division of paid and unpaid work in EU member states. This proposed framework will be empirically tested in a research project to be conducted in the next few years by members of a European network of social scientists who have been working together since 1995.division of labour;government policy;unpaid work;domestic work

Fundamental Aspects of the Aerodynamics of Turbojet Engine Combustors

Aerodynamic considerations in the design of high performance combustors for turbojet engines are discussed. Aerodynamic problems concerning the preparation of the fuel-air mixture, the recirculation zone where primary combustion occurs, the secondary combustion zone, and the dilution zone were examined. An aerodynamic analysis of the entire primary chamber ensemble was carried out to determine the pressure drop between entry and exit. The aerodynamics of afterburn chambers are discussed. A model which can be used to investigate the evolution of temperature, pressure, and rate and efficiency of combustion the length of the chamber was developed

MaxSAT Evaluation 2020 - Benchmark: Identifying maximum probability minimal cut sets in fault trees

This paper presents a MaxSAT benchmark focused on the identification of Maximum Probability Minimal Cut Sets (MPMCSs) in fault trees. We address the MPMCS problem by transforming the input fault tree into a weighted logical formula that is then used to build and solve a Weighted Partial MaxSAT problem. The benchmark includes 80 cases with fault trees of different size and composition as well as the optimal cost and solution for each case

MaxSAT Evaluation 2019 - Benchmark: Identifying Security-Critical Cyber-Physical Components in Weighted AND/OR Graphs

This paper presents a MaxSAT benchmark focused on identifying critical nodes in AND/OR graphs. We use AND/OR graphs to model Industrial Control Systems (ICS) as they are able to semantically grasp intricate logical interdependencies among ICS components. However, identifying critical nodes in AND/OR graphs is an NP-complete problem. We address this problem by efficiently transforming the input AND/OR graph-based model into a weighted logical formula that is then used to build and solve a Weighted Partial MaxSAT problem. The benchmark includes 80 cases with AND/OR graphs of different size and composition as well as the optimal cost and solution for each case

Machine-assisted Cyber Threat Analysis using Conceptual Knowledge Discovery

Over the last years, computer networks have evolved into highly dynamic and interconnected environments, involving multiple heterogeneous devices and providing a myriad of services on top of them. This complex landscape has made it extremely difficult for security administrators to keep accurate and be effective in protecting their systems against cyber threats. In this paper, we describe our vision and scientific posture on how artificial intelligence techniques and a smart use of security knowledge may assist system administrators in better defending their networks. To that end, we put forward a research roadmap involving three complimentary axes, namely, (I) the use of FCA-based mechanisms for managing configuration vulnerabilities, (II) the exploitation of knowledge representation techniques for automated security reasoning, and (III) the design of a cyber threat intelligence mechanism as a CKDD process. Then, we describe a machine-assisted process for cyber threat analysis which provides a holistic perspective of how these three research axes are integrated together

Nanocomposite MFI-alumina and FAU-alumina Membranes: Synthesis, Characterization and Application to Paraffin Separation and CO2 Capture

Rouleau, L. Pirngruber, G. Guillou, F. Barrere-Tricca, C. Omegna, A. Valtchev, V. Pera-Titus, M. Miachon, S. Dalmon, J. A.International audienceIn this work, we report the preparation of thermally and mechanically resistant high-surface (24-cm2) nanocomposite MFI-alumina and FAUalumina membranes by pore-plugging synthesis inside the macropores of α-alumina multilayered tubular supports. The MFI membranes were prepared from a clear solution precursor mixture being able to easily penetrate into the pores of the support. The MFI membranes were evaluated in the separation of n-/i-butane mixtures. The synthesis reliability was improved by mild stirring. The most selective MFI membranes were obtained for supports with mean pore sizes of 0.2 and 0.8 μm. The MFI effective thickness could be reduced to less than 10 μm by impregnating the support with water prior to synthesis and by diluting the synthesis mixture. The best MFI membrane offered an excellent tradeoff between selectivity and permeance at 448 K, with separation factors for equimolar n-butane/i-butane mixtures up to 18 and n-butane mixture permeances as high as 0.7 μmol$\cdot$s-1$\cdot$m-2$\cdot$Pa-1.Furthermore, a novel nanocomposite FAU membrane architecture has been obtained by an original synthesis route including in situ seeding using a cold gel-like precursor mixture, followed by growth of the FAU material by hydrothermal synthesis in two steps using a clear solution of low viscosity. This new membrane showed interesting performance in the separation of an equimolar CO2/N2 mixture at 323 K, with CO2/N2 separation factors and mixture CO2 permeances up to 12 and 0.4 μmol$\cdot$s-1$\cdot$m-2$\cdot$Pa-1,respectively

El valor del idioma español en ciencia y tecnología

Se analiza el valor del español como idioma principal en las revistas científicas editadas en España y en los países latinoamericanos, así como a través de la producción científica mundial recogida en las principales bases de datos bibliográficas de cobertura internacional. El estudio evidencia la importancia del español como lengua de comunicación científica en determinados ámbitos disciplinares ligados, por una parte, a intereses socioeconómicos y territoriales de los países de habla española, como es el caso de la economía regional, la medicina clínica, la geología y medio ambiente y, por otra, a determinados ámbitos científicos propios de las humanidades, como la literatura, la historia de los países iberoamericanos, etc. Este estudio pretende contribuir al mejor conocimiento y comprensión del valor real y potencial del español en la ciencia, de cara a la adecuada utilización de este recurso para el desarrollo de nuestras sociedades y su proyección cultural y económica a escala internacional.We analyse the specific weight of the Spanish as a primary language in scientific journals published in Spain and Latin American countries, as well as through the global scientific output covered by the main bibliographic databases of international coverage. The study highlights the importance of the Spanish as a language of scientific communication in certain disciplinary areas linked on the one hand to socio-economic regional interests of Spanish-speaking countries, as it is the case of Clinical medicine, Geology and Environment, and, on the other, to certain scientific fields of the Social sciences and Humanities, as it is the case of the Regional economy, the Literature, the History of Ibero-American countries, etc. This study aims to contribute to the better knowledge and understanding of the real and potential value of the Spanish in the scientific world, with regard to the appropriate use of this resource for the development of our societies, and its cultural and economic projection at the international level

Awareness of HPV and cervical cancer prevention among Cameroonian healthcare workers

<p>Abstract</p> <p>Background</p> <p>Cervical cancer, although largely preventable, remains the most common cause of cancer mortality among women in low-resource countries.</p> <p>The objective of this study was to assess knowledge and awareness of cervical cancer prevention among Cameroonian healthcare workers.</p> <p>Methods</p> <p>A cross-sectional self-administered questionnaire in 5 parts with 46 items regarding cervical cancer etiology and prevention was addressed to healthcare workers in six hospitals of Yaoundé, Cameroon. The investigators enlisted heads of nursing and midwifery to distribute questionnaires to their staff, recruited doctors individually, in hospitals and during conferences and distributed questionnaires to students in Yaoundé University Hospital and Medical School. Eight hundred and fifty questionnaires were distributed, 401 collected. Data were analyzed with SPSS version 16.0. Chi-square tests were used and P-values < 0.05 were considered significant.</p> <p>Results</p> <p>Mean age of respondents was 38 years (range 20-71 years). Most participants were aware that cervical cancer is a major public health concern (86%), were able to identify the most important etiological factors (58%) and believed that screening may prevent cervical cancer (90%) and may be performed by Pap test (84%). However, less than half considered VIA or HPV tests screening tests (38 and 47%, respectively). Knowledge about cancer etiology and screening was lowest among nurse/midwives.</p> <p>Conclusion</p> <p>Knowledge of cervical cancer and prevention by screening showed several gaps and important misconceptions regarding screening methods.</p> <p>Creating awareness among healthcare workers on risk factors and current methods for cervical cancer screening is a necessary step towards implementing effective prevention programs.</p

Shared and distinct pathways and networks genetically linked to coronary artery disease between human and mouse

Mouse models have been used extensively to study human coronary artery disease (CAD) or atherosclerosis and to test therapeutic targets. However, whether mouse and human share similar genetic factors and pathogenic mechanisms of atherosclerosis has not been thoroughly investigated in a data-driven manner. We conducted a cross-species comparison study to better understand atherosclerosis pathogenesis between species by leveraging multiomics data. Specifically, we compared genetically driven and thus CAD-causal gene networks and pathways, by using human GWAS of CAD from the CARDIoGRAMplusC4D consortium and mouse GWAS of atherosclerosis from the Hybrid Mouse Diversity Panel (HMDP) followed by integration with functional multiomics human (STARNET and GTEx) and mouse (HMDP) databases. We found that mouse and human shared >75% of CAD causal pathways. Based on network topology, we then predicted key regulatory genes for both the shared pathways and species-specific pathways, which were further validated through the use of single cell data and the latest CAD GWAS. In sum, our results should serve as a much-needed guidance for which human CAD-causal pathways can or cannot be further evaluated for novel CAD therapies using mouse models

Assessment of bone ingrowth potential of biomimetic hydroxyapatite and brushite coated porous E-beam structures

The bone ingrowth potential of biomimetic hydroxyapatite and brushite coatings applied on porous E-beam structure was examined in goats and compared to a similar uncoated porous structure and a conventional titanium plasma spray coating. Specimens were implanted in the iliac crest of goats for a period of 3 (4 goats) or 15 weeks (8 goats). Mechanical implant fixation generated by bone ingrowth was analyzed by a push out test. Histomorphometry was performed to assess the bone ingrowth depth and bone implant contact. The uncoated and hydroxyapatite-coated cubic structure had significantly higher mechanical strength at the interface compared to the Ti plasma spray coating at 15 weeks of implantation. Bone ingrowth depth was significantly larger for the hydroxyapatite- and brushite-coated structures compared to the uncoated structure. In conclusion, the porous E-beam surface structure showed higher bone ingrowth potential compared to a conventional implant surface after 15 weeks of implantation. Addition of a calcium phosphate coating to the E-beam structure enhanced bone ingrowth significantly. Furthermore, the calcium phosphate coating appears to work as an accelerator for bone ingrowth