Hafnium Oxidation at High Temperature in Steam

To assess the potential impact of using hafnium as absorber material in LWRs in high temperature accidental situations, the oxidation behavior of hafnium was studied up to 1400 °C, i.e. at temperature conditions relevant to severe accidents. Different sample geometries were tested and oxidized in steam/argon mixtures, either in a furnace or in a thermogravimetric analyzer. Metallographic examinations, hydrogen measurements and EPMA oxygen profiles were then performed. For hafnium rods/discs, metallographic examinations showed the presence of a dense and protective oxide film after steam oxidation. No or little hydrogen was detected in the metallic part of the rod/disc specimens. The reaction rate can be described by a parabolic law in the tested temperature range in the mid-to-long term, and the value of the effective activation energy determined from the experimental data in steam is in good agreement with the ones published in the literature. The diffusion coefficient of oxygen in hafnium was estimated at each temperature by fitting the experimental oxygen profile obtained on hafnium rods and its temperature dependence is derived in the temperature range 700-1400 °C. The hafnium claddings produced for the application in integral bundle tests exhibited a lower resistance to steam oxidation than hafnium rods/discs. Metallographic examinations showed a non-protective layer and a significant hydrogen amount was picked up by hafnium claddings. Above 800 °C, the oxidation rate for hafnium claddings follows a cubic to quartic law and the effective activation energy was determined in the temperature range 800-1100 °C. These tests highlighted the influence of the surface conditions on the oxidation rate of hafnium in steam. However, hafnium oxidation rate remains well below the oxidation rate of zirconium alloys in the same temperature range

A criterion for separating process calculi

We introduce a new criterion, replacement freeness, to discern the relative expressiveness of process calculi. Intuitively, a calculus is strongly replacement free if replacing, within an enclosing context, a process that cannot perform any visible action by an arbitrary process never inhibits the capability of the resulting process to perform a visible action. We prove that there exists no compositional and interaction sensitive encoding of a not strongly replacement free calculus into any strongly replacement free one. We then define a weaker version of replacement freeness, by only considering replacement of closed processes, and prove that, if we additionally require the encoding to preserve name independence, it is not even possible to encode a non replacement free calculus into a weakly replacement free one. As a consequence of our encodability results, we get that many calculi equipped with priority are not replacement free and hence are not encodable into mainstream calculi like CCS and pi-calculus, that instead are strongly replacement free. We also prove that variants of pi-calculus with match among names, pattern matching or polyadic synchronization are only weakly replacement free, hence they are separated both from process calculi with priority and from mainstream calculi.Comment: In Proceedings EXPRESS'10, arXiv:1011.601

Identification of histone deacetylase inhibitors with (arylidene)aminoxy scaffold active in uveal melanoma cell lines

Uveal melanoma (UM) represents an aggressive type of cancer and currently, there is no effective treatment for this metastatic disease. In the last years, histone deacetylase inhibitors (HDACIs) have been studied as a possible therapeutic treatment for UM, alone or in association with other chemotherapeutic agents. Here we synthesised a series of new HDACIs based on the SAHA scaffold bearing an (arylidene)aminoxy moiety. Their HDAC inhibitory activity was evaluated on isolated human HDAC1, 3, 6, and 8 by fluorometric assay and their binding mode in the catalytic site of HDACs was studied by molecular docking. The most promising hit was the quinoline derivative VS13, a nanomolar inhibitor of HDAC6, which exhibited a good antiproliferative effect on UM cell lines at micromolar concentration and a capability to modify the mRNA levels of HDAC target genes similar to that of SAHA

PW06-05 The predictive role of anxiety disorders on depressive phenomenology during post-partum period

Aims:To investigate the predictive role of any specific (DSM-IV) Anxiety Disorders (AD) on depressive symptoms and Major or Minor Depressive Disorder (MDD, mDD) during early postpartum period.Method:Women (at the 12th-15th gestational week, N=1066) were recruited in the framework of the Program 'Perinatal Depression - Research & Screening Unit (PND-ReScU)". Depressive symptoms were assessed by the Edinburgh Postnatal Depression Scale (EPDS), and Axis-I disorders (AD, MDD, mDD) were diagnosed with the Structured Clinical Interview for Axis-I Disorders (SCID-I).Results:Any current AD at baseline (3rd month of pregnancy) was detected in 231 (21.7%). Having at least one current AD, was associated with a greater likelihood of having MDD or mDD during the early postpartum period, even after the adjustment for the confounding factor of having a lifetime history of MDD (RR=3.86 95%CI 1.58-9.42).In particular, women affected by Obsessive Compulsive Disorder (N=17; 1.6%) or Panic Disorder (N=43; 4%) had at higher risk to develop depressive symptoms (EPDS≥13) during the postpartum period than women without these AD (RR=6.9 and 6.7 respectively). As for the risk of developing PPD, the strongest association was found for women with Panic Disorder (RR=7.6 95% CI 2.62-22.0).Conclusions:AD are associated with a greater likelihood to develop depressive symptoms and MDD or mDD during the early postpartum period. Women with current PD have the strongest risk to develop both MDD or mDD and depressive symptoms during early postpartum period compared to other anxiety disorders

Silver nanoparticles from oregano leaves’ extracts as antimicrobial components for non-infected hydrogel contact lenses

The oregano leaves’ extract (ORLE) was used for the formation of silver nanoparticles (AgNPs(ORLE)). ORLE and AgNPs(ORLE) (2 mg/mL) were dispersed in polymer hydrogels to give the pHEMA@ORLE_2 and pHEMA@AgNPs(ORLE)_2 using hydroxyethyl–methacrylate (HEMA). The materials were characterized by X-ray fluorescence (XRF) spectroscopy, X-ray powder diffraction analysis (XRPD), thermogravimetric differential thermal analysis (TG-DTA), derivative thermogravimetry/differential scanning calorimetry (DTG/DSC), ultraviolet (UV-Vis), and attenuated total reflection mode (ATR-FTIR) spectroscopies in solid state and UV–Vis in solution. The crystallite size value, analyzed with XRPD, was determined at 20 nm. The antimicrobial activity of the materials was investigated against Gram-negative bacterial strains Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli). The Gram-positive ones of the genus of Staphylococcus epidermidis (S. epidermidis) and Staphylococcus aureus (S. aureus) are known to be involved in microbial keratitis by the means of inhibitory zone (IZ), minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). The IZs, which developed upon incubation of P. aeruginosa, E. coli, S. epidermidis, and S. aureus with paper discs soaked in 2 mg/mL of AgNPs(ORLE), were 11.7 ± 0.7, 13.5 ± 1.9, 12.7 ± 1.7, and 14.3 ± 1.7 mm. When the same dose of ORLE was administrated, the IZs were 10.2 ± 0.7, 9.2 ± 0.5, 9.0 ± 0.0, and 9.0 ± 0.0 mm. The percent of bacterial viability when they were incubated over the polymeric hydrogel discs of pHEMA@AgNPs(ORLE)_2 was interestingly low (66.5, 88.3, 77.7, and 59.6%, respectively, against of P. aeruginosa, E. coli, S. epidermidis, and S. aureus) and those of pHEMA@ORLE_2 were 89.3, 88.1, 92.8, and 84.6%, respectively. Consequently, pHEMA@AgNPs(ORLE)_2 could be an efficient candidate toward the development of non-infectious contact lenses

Two-step analytical procedure for the characterization and quantification of metal soaps and resinates in paint samples

Metal soaps and resinates are known to be spontaneously formed in artistic paintings, as a product of the reaction between aliphatic and terpenoid acids released by hydrolysis and oxidation of the organic media and certain cations contained in some inorganic pigments. In this paper we present an optimization and the validation of a GC/MS method for the qualitative and quantitative analysis of mixtures of terpenoid acids and aliphatic mono and dicarboxylic acids and metal carboxylates of terpenoid and aliphatic mono and dicarboxylic acids in the same paint microsample. This is based on a two-step analytical approach entailing the subsequent use of two silylating agents, N,O-bis(trimethylsilyl)trifluoroacetamide for the analysis of free acids and metal carboxylates, and 1,1,1,3,3,3-hexamethyldisilazane for the analysis of free acids. The application of this approach is possible because of the good stability at room temperature of the TMS derivatives of aliphatic and terpenoid species, characterized by high boiling points and relatively low vapour pressures. The method was then applied to the characterization of samples collected from two reference paint layers aged for 20 years, a paint sample taken from a pulpit, and sample of the varnish coating of a wooden writing desk, both from the second half of the seventeenth century

Distinct mechanisms for aerenchyma formation in leaf sheaths of rice genotypes displaying a quiescence or escape strategy for flooding tolerance

Background and Aims Rice is one of the few crops able to withstand periods of partial or even complete submergence. One of the adaptive traits of rice is the constitutive presence and further development of aerenchyma which enables oxygen to be transported to submerged organs. The development of lysigenous aerenchyma is promoted by ethylene accumulating within the submerged plant tissues, although other signalling mechanisms may also co-exist. In this study, aerenchyma development was analysed in two rice (Oryza sativa) varieties, ‘FR13A’ and ‘Arborio Precoce’, which show opposite traits in flooding response in terms of internode elongation and survival. Methods The growth and survival of rice varieties under submergence was investigated in the leaf sheath of ‘FR13A’ and ‘Arborio Precoce’. The possible involvement of ethylene and reactive oxygen species (ROS) was evaluated in relation to aerenchyma formation. Cell viability and DNA fragmentation were determined by FDA/FM4-64 staining and TUNEL assay, respectively. Ethylene production was monitored by gas chromatography and by analysing ACO gene expression. ROS production was measured by using Amplex Red assay kit and the fluorescent dye DCFH2-DA. The expression of APX1 was also evaluated. AVG and DPI solutions were used to test the effect of inhibiting ethylene biosynthesis and ROS production, respectively. Key Results Both the varieties displayed constitutive lysigenous aerenchyma formation, which was further enhanced when submerged. ‘Arborio Precoce’, which is characterized by fast elongation when submerged, showed active ethylene biosynthetic machinery associated with increased aerenchymatous areas. ‘FR13A’, which harbours the Sub1A gene that limits growth during oxygen deprivation, did not show any increase in ethylene production after submersion but still displayed increased aerenchyma. Hydrogen peroxide levels increased in ‘FR13A’ but not in ‘Arborio Precoce’. Conclusions While ethylene controls aerenchyma formation in the fast-elongating ‘Arborio Precoce’ variety, in ‘FR13A’ ROS accumulation plays an important role