10,665 research outputs found

    Development of a unique laboratory standard indium gallium arsenide detector for the 500 to 1700 micron spectral region, phase 2

    Get PDF
    In the course of this work, 5 mm diameter InGaAs pin detectors were produced which met or exceeded all of the goals of the program. The best results achieved were: shunt resistance of over 300 K ohms; rise time of less than 300 ns; contact resistance of less than 20 ohms; quantum efficiency of over 50 percent in the 0.5 to 1.7 micron range; and devices were maintained and operated at 125 C without deterioration for over 100 hours. In order to achieve the goals of this program, several major technological advances were realized, among them: successful design, construction and operation of a hydride VPE reactor capable of growing epitaxial layers on 2 inch diameter InP substrates with a capacity of over 8 wafers per day; wafer processing was upgraded to handle 2 inch wafers; a double layer Si3N4/SiO2 antireflection coating which enhances response over the 0.5 to 1.7 micron range was developed; a method for anisotropic, precisely controlled CH4/H2 plasma etching for enhancement of response at short wavelengths was developed; and electronic and optical testing methods were developed to allow full characterization of detectors with size and spectral response characteristics. On the basis of the work and results achieved in this program, it is concluded that large size, high shunt resistance, high quantum efficiency InGaAs pin detectors are not only feasible but also manufacturable on industrial scale. This device spans a significant portion of visible and near infrared spectral range and it will allow a single detector to be used for the 0.5 to 1.7 micron spectral region, rather than the presently used silicon (for 0.5 to 1.1 microns) and germanium (0.8 to 1.7 microns)

    Optimization of Short Coherent Control Pulses

    Full text link
    The coherent control of small quantum system is considered. For a two-level system coupled to an arbitrary bath we consider a pulse of finite duration. We derive the leading and the next-leading order corrections to the evolution operator due to the non-commutation of the pulse and the bath Hamiltonian. The conditions are computed that make the leading corrections vanish. The pulse shapes optimized in this way are given for π\pi and π2\frac{\pi}{2} pulses.Comment: 9 pages, 6 figures; published versio

    Detecting swift heavy ion irradiation effects with graphene

    Full text link
    In this paper we show how single layer graphene can be utilized to study swift heavy ion (SHI) modifications on various substrates. The samples were prepared by mechanical exfoliation of bulk graphite onto SrTiO3_3, NaCl and Si(111), respectively. SHI irradiations were performed under glancing angles of incidence and the samples were analysed by means of atomic force microscopy in ambient conditions. We show that graphene can be used to check whether the irradiation was successful or not, to determine the nominal ion fluence and to locally mark SHI impacts. In case of samples prepared in situ, graphene is shown to be able to catch material which would otherwise escape from the surface.Comment: 10 pages, 3 figure

    Damage in graphene due to electronic excitation induced by highly charged ions

    Full text link
    Graphene is expected to be rather insensitive to ionizing particle radiation. We demonstrate that single layers of exfoliated graphene sustain significant damage from irradiation with slow highly charged ions. We have investigated the ion induced changes of graphene after irradiation with highly charged ions of different charge states (q = 28-42) and kinetic energies E_kin = 150-450 keV. Atomic force microscopy images reveal that the ion induced defects are not topographic in nature but are related to a significant change in friction. To create these defects, a minimum charge state is needed. In addition to this threshold behaviour, the required minimum charge state as well as the defect diameter show a strong dependency on the kinetic energy of the projectiles. From the linear dependency of the defect diameter on the projectile velocity we infer that electronic excitations triggered by the incoming ion in the above-surface phase play a dominant role for this unexpected defect creation in graphene

    Liquid Oxygen Magnetohydrodynamics

    Get PDF
    In the cryogenic realm, liquid oxygen (LOX) possesses a natural paramagnetic susceptibility and does not require a colloidal suspension of particles for practical application as a magnetic working fluid. Commercial ferrofluids have performed well in industrial applications, but expanding their workable range to low temperatures requires a suitable selection of the carrier fluid, such as LOX. In this chapter, the equation of motion for the pure fluid is derived and applied to a slug of LOX being displaced by a pulsed magnetic field. Its theoretical performance is compared to actual experimental data with discussion on empirical parameters, sensitivity to measurement uncertainty, and geometric similarity. The 1.1 T pulse of magnetic flux density produced oscillations in the slug of 6-8 Hz, generating up to 1.4 kPa of pressure change in a closed section when the slug acted like a liquid piston. The experiments and theoretical model demonstrate that LOX could be used as a magnetic working fluid in certain applications

    Simulation of ion behavior in an open three-dimensional Paul trap using a power series method

    Full text link
    Simulations of the dynamics of ions trapped in a Paul trap with terms in the potential up to the order 10 have been carried out. The power series method is used to solve numerically the equations of motion of the ions. The stability diagram has been studied and the buffer gas cooling has been implemented by a Monte Carlo method. The dipole excitation was also included. The method has been applied to an existing trap and it has shown good agreement with the experimental results and previous simulations using other methods

    Optimized Dynamical Decoupling for Time Dependent Hamiltonians

    Full text link
    The validity of optimized dynamical decoupling (DD) is extended to analytically time dependent Hamiltonians. As long as an expansion in time is possible the time dependence of the initial Hamiltonian does not affect the efficiency of optimized dynamical decoupling (UDD, Uhrig DD). This extension provides the analytic basis for (i) applying UDD to effective Hamiltonians in time dependent reference frames, for instance in the interaction picture of fast modes and for (ii) its application in hierarchical DD schemes with π\pi pulses about two perpendicular axes in spin space. to suppress general decoherence, i.e., longitudinal relaxation and dephasing.Comment: 5 pages, no figure

    Travel linearity and speed of human foragers and chimpanzees during their daily search for food in tropical rainforests

    Get PDF
    To understand the evolutionary roots of human spatial cognition, researchers have compared spatial abilities of humans and one of our closest living relatives, the chimpanzee (Pan troglodytes). However, how humans and chimpanzees compare in solving spatial tasks during real-world foraging is unclear to date, as measuring such spatial abilities in natural habitats is challenging. Here we compared spatial movement patterns of the Mbendjele BaYaka people and the Taï chimpanzees during their daily search for food in rainforests. We measured linearity and speed during off-trail travels toward out-of-sight locations as proxies for spatial knowledge. We found similarly high levels of linearity in individuals of Mbendjele foragers and Taï chimpanzees. However, human foragers and chimpanzees clearly differed in their reactions to group size and familiarity with the foraging areas. Mbendjele foragers increased travel linearity with increasing familiarity and group size, without obvious changes in speed. This pattern was reversed in Taï chimpanzees. We suggest that these differences between Mbendjele foragers and Taï chimpanzees reflect their different ranging styles, such as life-time range size and trail use. This result highlights the impact of socio-ecological settings on comparing spatial movement patterns. Our study provides a first step toward comparing long-range spatial movement patterns of two closely-related species in their natural environments
    corecore