Implementasi Alignment Point Pattern pada Sistem Pengenalan Sidik Jari Menggunakan Template Matching

Fingerprints is one of biometric identification system. This is because fingerprints have unique and different pattern in every human, so identification using fingerprints can no longer be doubted. But, manual fingerprint recognition by human hard to apply because of the complex pattern on it. Therefore, an accurate fingerprint matching system is needed. There are 3 steps needed for fingerprint recognition system, namely image enhancement, feature extraction, and matching. In this study, crossing number method is used as a minutiae extraction process and template matching is used for matching. We also add alignment point pattern  process added, which are ridge translation and  rotation to increase system performance. The system provide a performance of 18,54% with a matching process without alignment point pattern, and give performance of 67,40% by adding alignment point pattern process

Passively mode-locked ultrashort pulse fiber laser incorporating multi-layered graphene nanoplatelets saturable absorber

In this paper, a passive mode-locked erbium-doped fiber laser (EDFL) incorporating graphene nanoplatelet (GNP) powder-based saturable absorber (SA) with short pulse duration in femtosecond range is demonstrated. A good synthesis of GNP can be simply produced via a combination of thermal, chemical, and mechanical exfoliation of expandable graphite. The GNP-SA is fabricated by mechanically imprinting the powder onto the tip of a single mode fiber ferrule. The characterization of SA is done via focus ion beam scanning electron microscope, energy dispersive X-ray spectroscopy, as well as Raman spectroscopy. The fabricated GNP-SA has 1.8 % modulation depth and C-band transmission loss of less than 1.8 dB. The ring-configuration EDFL integrated with GNP-SA yields a mode-locking threshold of 22.6 mW pump power. Net anomalous dispersion of the laser cavity is validated by the observation of Kelly’s sideband in the optical spectrum. At maximum pump power of 115.8 mW, the mode-locked EDFL has a pulse repetition rate of 13.11 MHz, sech2 profile fitted pulse duration of 694 fs, peak-to-pedestal extinction ratio of 58.2 dB, average output power of 6.7 mW, and pulse energy of 507.2 pJ. Our proposed GNP-SA is feasible as a mode-locker for ultrashort pulsed fiber laser with advantage in terms of simple synthesis and fabrication technique

Distribution power loss minimization via distributed generation, capacitor and network reconfiguration

This paper presents a solution to solve the network reconfiguration, DG coordination (location and size) and capacitor coordination (location and size), simultaneously. The proposed solution will be determined by using Artificial Bee Colony (ABC). Various case studies are presented to see the impact on the test system, in term of power loss reduction and also voltage profiles. The proposed approach is applied to a 33-bus test system and simulate by using MATLAB programming. The simulation results show that combination of DG, capacitor and network reconfiguration gives a positive impact on total power losses minimization as well as voltage profile improvement compared to other case studies

Sensitive and specific protein sensing using single-mode tapered fiber immobilized with biorecognition molecules

We examine and demonstrate a biosensor using single-mode tapered fiber that has been immobilized with biorecognition molecules to sense targeted proteins. Interaction of evanescent waves with the external medium surrounding the tapered region produces an interferometric-patterned spectrum, which shifts correspondingly to any changes of refractive index (RI) in the external medium. The proposed setup managed to obtain an RI sensitivity and concentration sensitivity of 2526.8 nm/RIU and 20.368 nm/μM, respectively, which, to our knowledge, is highly sensitive when compared with previous studies. The dynamic performance, good specificity, and high sensitivity of the proposed method highlight an immensely beneficial choice for immunological diagnostics

Distribution power loss minimization via distributed generation, capacitor and network reconfiguration

This paper presents a solution to solve the network reconfiguration, DG coordination (location and size), and capacitor coordination (location and size), simultaneously. The proposed solution will be determined by using Artificial Bee Colony (ABC). Various case studies are presented to see the impact on the test system, in terms of power loss reduction and also voltage profiles. The proposed approach is applied to a 33-bus test system and simulated by using MATLAB programming. The simulation results show that combination of DG, capacitor and network reconfiguration gives a positive impact on total power losses minimization as well as voltage profile improvement compared to other case studies

Is Malaysia’s banded langur, Presbytis femoralis femoralis, actually Presbytis neglectus neglectus? Taxonomic revision with new insights on the radiation history of the Presbytis species group in Southeast Asia

The disjunct distribution of Presbytis femoralis subspecies across Sumatra (P. f. percura), southern (P. f. femoralis) and northern (P. f. robinsoni) Peninsular Malaysia marks the unique vicariance events in the Sunda Shelf. However, the taxonomic positions and evolutionary history of P. f. femoralis are unresolved after decades of research. To elucidate this evolutionary history, we analyzed 501 base pairs of the mitochondrial HVSI gene from 25 individuals representing Malaysia’s banded langur, with the addition of 29 sequences of Asian Presbytis from Genbank. Our results revealed closer affinity of P. f. femoralis to P. m. mitrata and P. m. sumatrana while maintaining the monophyletic state of P. f. femoralis as compared to P. f. robinsoni. Two central theses were inferred from the results; (1) P. f. femoralis does not belong in the same species classification as P. f. robinsoni, and (2) P. f. femoralis is the basal lineage of the Presbytis in Peninsular Malaysia. Proving the first hypothesis through genetic analysis, we reassigned P. f. femoralis of Malaysia to Presbytis neglectus (Schlegel’s banded langur) (Schlegel in Revue Methodique, Museum d’Histoire Naturelle des Pays-Bas 7:1, 1876) following the International Code of Zoological Nomenclature (article 23.3). The ancestors of P. neglectus are hypothesized to have reached southern Peninsular Malaysia during the Pleistocene and survived in refugium along the western coast. Consequently, they radiated upward, forming P. f. robinsoni and P. siamensis resulting in the highly allopatric distribution in Peninsular Malaysia. This study has successfully resolved the taxonomic position of P. neglectus in Peninsular Malaysia while providing an alternative biogeographic theory for the Asian Presbytis

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Mechanically deposited tungsten disulfide saturable absorber for low-threshold Q-switched erbium-doped fiber laser

In this paper, we report a Q-switched erbium-doped fiber laser incorporating tungsten disulfide (WS2) as the saturable absorber. A direct mechanical deposition technique using a scotch tape is employed to place the WS2 powder onto the tip of a fiber ferrule. Several runs of mechanical extraction are performed to reduce the thickness of WS2 powder on the fiber tip. The fabricated WS2 saturable absorber exhibits a saturation intensity of 548.6 MW/cm2, modulation depth of 4.1% and non-saturable loss of 67.8%. A ring cavity erbium-doped fiber laser integrating the WS2 saturable absorber yields continuous wave lasing and Q-switching threshold at pump power of 10 and 12.7 mW, respectively. This Q-switching pump power threshold is the lowest to the best of the authors’ knowledge. The proposed technique of direct mechanical deposition is inexpensive, significantly faster and simpler compared to previously reported methods

Passively mode-locked soliton femtosecond pulses employing graphene saturable absorber

We demonstrate a passively mode-locked fiber laser incorporating graphene thin film (GTF) as saturable absorber (SA). The SA is fabricated by sandwiching the GTF between two single mode fiber ferrules through a fiber adaptor. The transmission loss at 1560 nm and non-linear saturation absorption modulation depth for GTF-SA are 0.8 dB and 2.90%, respectively. An erbium-doped fiber laser cavity is constructed to verify the functionality of GTF-SA and is designed to have net anomalous dispersion. It generates large spectral width of 4.99 nm with pulse repetition rate of 9.655 MHz and pulse width of 670 fs. Net anomalous dispersion and time bandwidth product higher than the sech2 transform-limited pulse validate the experimental result. In short, we demonstrate high performance GTF-SA that is able to generate ultrafast pulse duration in femtosecond range effortlessly with simple and green SA fabrication procedures

Arduino-Uno based mobile data logger with GPS feature

Lightning activity correlates with the formation of thunderclouds which increase the atmospheric electric field (AEF) between the cloud and the earth. Observations of the development of the AEF will allow the prediction of lightning activities close to a particular location. In research and development, the data logger plays an important role to observe and collect data from AEF sensors. The data logger must be reliable and effective. High investment costs are involved in acquiring a data logger, and choosing a suitable data logger is not easy. Institut Voltan dan Arus Tinggi (IVAT) is develeloping AEF sensor. Along with that sensor development a data logger development is also required. In this paper, a mobile data logger is developed by using Arduino-Uno. This mobile data logger is equipped with a GPS module, which provides accurate positioning in the collection of data. Laboratory and field tests were carried out to observe the performance of the mobile data logger system. The results showed that the developed data logger works properly