Wet Torrefaction of forest Residues – Combustion Kinetics

AbstractFresh branches of Norway spruce and birch were torrefied in hot compressed water at varied temperatures(175, 200, or 225°C) and for 30minutes. The combustion of untreated and torrefied branchesin synthetic air (21% O2 and 79% N2) wasexperimentally studied by means ofa thermogravimetric analyzer, followed by a kinetic analysis adopting the distributed activation energy model. It appears that, wet torrefaction has significant effects on the combustion reactivity of forest residues. Compared with the raw materials, wet-torrefied branches are less reactive during devolatilization, but more reactive in the char combustion stage

Process modeling and optimization for torrefaction of forest residues

This work aims to build a comprehensive biomass torrefaction model, which can provide a wide range of information essential for industrialization and commercialization of the process. Norwegian forest residue (birch branches) was chosen as feedstock. The model is capable of presenting detailed distributions of main and by-products from the torrefaction process. In addition, important fuel properties (ultimate analysis and heating value) of the main solid product after torrefaction can be predicted. The model is validated and simulation results show good agreement with available experimental data in the literature. Reduction in mass and energy yields as well as improvement in heating value of torrefied biomass with increasing torrefaction temperature are observed. Trends for carbon, oxygen and hydrogen contents are also consistent with other experimental works. Moreover, overall energy consumption and process energy efficiency can be estimated from the model. It reveals that drying accounts for 76-80% of the total heat demand. Furthermore, the process energy efficiency reduces with increasing temperature, thus torrefaction at high temperatures is not advisable. More importantly, process optimization shows that optimal conditions for torrefaction of birch branches are 30 min holding time and a temperature between 275 and 278 °C.acceptedVersio

Pretreatment of Korean pine (Pinus koraiensis) via wet torrefaction in inert and oxidative atmospheres

This study investigates the possibility of utilizing waste heat sources such as hot flue gas or hot air for wet torrefaction (WT) processes. Although waste heat sources are cheaper alternatives than pure nitrogen used as purging and pressurizing gas for WT, they contain some fractions of non-inert gases and potentially affect the yield and fuel properties of the solid product (hydrochar). To assess these possible influences, Korean pine (Pinus koraiensis) was subjected to WT in different atmospheres, including N2, CO2, O2, air and synthetic flue gas (SFG), and the produced hydrochars were characterized. The results show that WT in different gas atmospheres at 200 °C and 20 bar yields 72.24–73.82% of hydrochar. In general, the fuel properties of the hydrochars are found to be superior to those of the untreated pine: the O/C ratio decreases from 0.703 (raw pine) to 0.582–0.588 (hydrochars), and the HHV increases from 19.22 MJ/kg (raw pine) to 20.80–20.99 MJ/kg (hydrochars). Furthermore, analysis of variance (ANOVA) and pairwise t-test were performed, and the results reveal that the effects of different atmospheres in WT are not statistically meaningful (p-values >0.05), except for the influence of CO2 on ash content. The results also indicate that the presence of oxidative gases such as O2 and CO2 in WT process at appropriate pressures and temperatures has almost insignificant effects on the yields and fuel properties of the hydrochar products. The findings from this study could encourage the utilization of waste heat sources for WT to reduce operating costs.acceptedVersionPeer reviewe

Acute Kidney Injury After Percutaneous Coronary Intervention Guided by Intravascular Ultrasound

Purpose We investigated the impact of intravascular ultrasound guidance on reducing the incidence of contrast-induced acute kidney injury (CI-AKI) in patients undergoing percutaneous coronary intervention (PCI). Methods Ninety-nine patients were enrolled in this prospective cohort who were not randomly assigned to angiography-guided percutaneous coronary intervention or intravascular ultrasound-guided percutaneous coronary intervention. The patients were hospitalized at the Vietnam National Heart Institute - Bach Mai Hospital between 2019 and 2020. Acute kidney injury incidence during hospitalization was the primary endpoint. Results A total of 99 patients were divided into two groups: the intravascular ultrasound-guided group (33 participants) and the angiography-guided group (66 participants). The mean ± SD contrast volume of each group was 95.2 ± 37.1 mL and 133.0 ± 36.0 mL for the ultrasound-guided and angiography-guided groups, with P \u3c 0.0001. Intravascular imaging-guided percutaneous coronary intervention (IVUS-guided PCI) was associated with reduced acute kidney injury incidence during hospitalization: 0.0% vs. 12.12% and P = 0.049. Conclusions Intravascular ultrasound is a safe imaging tool that guides percutaneous coronary intervention and significantly reduces the rate of acute kidney injury compared to angiography alone. Patients who have a high chance of experiencing acute kidney injury benefit from using intravascular ultrasound

Clinical Description of a Completed Outbreak of SARS in Vietnam, February–May, 2003

We investigated the clinical manifestations and course of all probable severe acute respiratory syndrome (SARS) patients in the Vietnam outbreak. Probable SARS cases were defined by using the revised World Health Organization criteria. We systematically reviewed medical records and undertook descriptive statistical analyses. All 62 patients were hospitalized. On admission, the most prominent symptoms were malaise (82.3%) and fever (79.0%). Cough, chest pain, and shortness of breath were present in approximately one quarter of the patients; 79.0% had lymphopenia; 40.3% had thrombocytopenia; 19.4% had leukopenia; and 75.8% showed changes on chest radiograph. Fever developed on the first day of illness onset, and both respiratory symptoms and radiographic changes occurred on day 4. On average, maximal radiographic changes were observed on day 10, and fevers subsided by day 13. Symptoms on admission were nonspecific, although fever, malaise, and lymphopenia were common. The complications of SARS included invasive intubation and ventilation (11.3%) and death (9.7%)

Factors associated with nosocomial SARS-CoV transmission among healthcare workers in Hanoi, Vietnam, 2003

BACKGROUND: In March of 2003, an outbreak of Severe Acute Respiratory Syndrome (SARS) occurred in Northern Vietnam. This outbreak began when a traveler arriving from Hong Kong sought medical care at a small hospital (Hospital A) in Hanoi, initiating a serious and substantial transmission event within the hospital, and subsequent limited spread within the community. METHODS: We surveyed Hospital A personnel for exposure to the index patient and for symptoms of disease during the outbreak. Additionally, serum specimens were collected and assayed for antibody to SARS-associated coronavirus (SARS-CoV) antibody and job-specific attack rates were calculated. A nested case-control analysis was performed to assess risk factors for acquiring SARS-CoV infection. RESULTS: One hundred and fifty-three of 193 (79.3%) clinical and non-clinical staff consented to participate. Excluding job categories with <3 workers, the highest SARS attack rates occurred among nurses who worked in the outpatient and inpatient general wards (57.1, 47.4%, respectively). Nurses assigned to the operating room/intensive care unit, experienced the lowest attack rates (7.1%) among all clinical staff. Serologic evidence of SARS-CoV infection was detected in 4 individuals, including 2 non-clinical workers, who had not previously been identified as SARS cases; none reported having had fever or cough. Entering the index patient's room and having seen (viewed) the patient were the behaviors associated with highest risk for infection by univariate analysis (odds ratios 20.0, 14.0; 95% confidence intervals 4.1–97.1, 3.6–55.3, respectively). CONCLUSION: This study highlights job categories and activities associated with increased risk for SARS-CoV infection and demonstrates that a broad diversity of hospital workers may be vulnerable during an outbreak. These findings may help guide recommendations for the protection of vulnerable occupational groups and may have implications for other respiratory infections such as influenza

Lack of SARS Transmission among Public Hospital Workers, Vietnam

The severe acute respiratory syndrome (SARS) outbreak in Vietnam was amplified by nosocomial spread within hospital A, but no transmission was reported in hospital B, the second of two designated SARS hospitals. Our study documents lack of SARS-associated coronavirus transmission to hospital B workers, despite variable infection control measures and the use of personal protective equipment

Antibiotic resistance of Streptococcus pneumoniae in Vietnamese children with severe pneumonia: a cross-sectional study

BackgroundStreptococcus pneumoniae is the most common bacterium that causes community-acquired pneumonia (CAP) in children. The rate of S. pneumoniae resistance to antibiotics is increasing, particularly in patients with severe CAP. Therefore, the level of antibiotic resistance of S. pneumoniae causing severe CAP in Vietnamese children requires regular monitoring.MethodsThis was a cross-sectional descriptive study. Nasopharyngeal aspiration specimens from children were cultured, isolated, and examined for S. pneumoniae. Bacterial strains were assessed for antimicrobial susceptibility, and the minimum inhibitory concentration (MIC) was determined.ResultsEighty-nine strains of S. pneumoniae were isolated from 239 children with severe CAP. The majority of isolates were completely non-susceptible to penicillin (1.1% intermediate, 98.9% resistant) and highly resistant to erythromycin (96.6%) and clarithromycin (88.8%); the rate of resistance to ceftriaxone was 16.9%, with the proportion of intermediate resistance at 46.0%; 100% of strains were susceptible to vancomycin and linezolid. For most antibiotics, MIC50 and MIC90 were equal to the resistance threshold according to the Clinical and Laboratory Standards Institute 2021; penicillin had an eight-fold increase in MIC90 (64 mg/L) and ceftriaxone had a 1.5-fold increase in MIC90 (6 mg/L).ConclusionStreptococcus pneumoniae isolates described in this study were resistant to many antibiotics. Penicillin should not be the first-line antibiotic of choice, and ceftriaxone at an enhanced dose should be used instead

Extraction of anthocyanins from Butterfly pea (Clitoria ternatea L. Flowers) in Southern Vietnam: Response surface modeling for optimization of the operation conditions

In this paper, the Response Surface Methodology (RSM), in conjunction with Central Composite Design (CCD), was used to optimize the extraction of anthocyanins from Butterfly pea (Clitoria ternatea L.Flowers) cultivated in Southern Vietnam. The effect of extraction temperatures of solvent ethanol (50-70 °C), duration of extraction (40-50 min) and solid-liquid ratios (20:1-30:1) was measured as independent variables on the total extraction anthocyanins in the response function. The highest anthocyanin content of 132.756 mg/L of butterfly pea anthocyanin was collected at the solid liquid ratio of 23:1, extraction time of 46 min, and temperature 60.6°C. Butterfly pea anthocyanins yield detailed significant correlation with high F values, low P values (<0.0001), and desirable determination coefficient (R2 = 0.9994)

Construction and Demolition Waste-Derived Feedstock: Fuel Characterization of a Potential Resource for Sustainable Aviation Fuels Production

13-C-AJFF-UH-11, 13This is an open access article under the terms of the Creative Commons Attribution 4.0 International (CC BY 4.0) license https://creativecommons.org/licenses/by/4.0/. Please cite this article as: Bach Q-V, Fu J and Turn S (2021) Construction and Demolition WasteDerived Feedstock: Fuel Characterization of a Potential Resource for Sustainable Aviation Fuels Production. Front. Energy Res. 9:711808. doi: 10.3389/fenrg.2021.711808Detailed characterization of physical and fuel properties of construction and demolition waste (CDW) can support research and commercial efforts to develop sustainable aviation fuels. The current study reports time-series data for bulk density, mineral composition, reactivity, and fuel properties (proximate analysis, ultimate analysis, heating value and ash fusibility) of the combustible material fraction of samples mined from an active CDW landfill on the island of O\u2bbahu, Hawai\u2bbi. The fuel properties are in ranges comparable to other reference solid wastes such as demolition wood, municipal solid wastes, and landfilled materials. Ash fusion temperatures (from initial deformation to fluid deformation) among the samples were found to lie in a narrow range from 1,117 to 1,247\ub0C. Despite higher ash contents, the CDW derived feedstock samples had comparable heating values to reference biomass and construction wood samples, indicating the presence of higher energy content materials (e.g., plastics, roofing material, etc.) in addition to wood. The waste samples show lower reactivity peaks in the devolatilization stage, but higher reactivity peaks (located at lower temperatures) in the gasification and combustion stage, compared with those of reference biomass and construction woods. Mineral elemental analysis revealed that materials from various sources (gypsum, plastic, rust, paint, paint additives, and soils) were present in the samples. Soil recovered from the landfill contained higher Ca, Cu, Fe, K, Mn, Pb, and Zn levels than soil samples from elsewhere on the island. Results from this study can provide insight on variations in the physical and fuel properties of the CDW derived feedstocks, and support the design of conversion systems