Survival of Clostridium perfringens During Simulated Transport and Stability of Some Plasmid-borne Toxin Genes under Aerobic Conditions

Clostridium perfringens is a pathogen of great concern in veterinary medicine, because it causes enteric diseases and different types of toxaemias in domesticated animals. It is important that bacteria in tissue samples, which have been collected in the field, survive and for the classification of C. perfringens into the correct toxin group, it is crucial that plasmid-borne genes are not lost during transportation or in the diagnostic laboratory. The objectives of this study were to investigate the survival of C. perfringens in a simulated transport of field samples and to determine the stability of the plasmid-borne toxin genes cpb1 and etx after storage at room temperature and at 4°C. Stability of the plasmid-borne genes cpb1 and etx of C. perfringens CCUG 2035, and cpb2 from C. perfringens CIP 106526, JF 2255 and 6 field isolates in aerobic atmosphere was also studied. Survival of C. perfringens was similar in all experiments. The cpb1 and etx genes were detected in all isolates from samples stored either at room temperature or at 4°C for 24–44 h. Repeated aerobic treatment of C. perfringens CCUG 2035 and CIP 106526 did not result in the loss of the plasmid-borne genes cpb1, cpb2 or etx. Plasmid-borne genes in C. perfringens were found to be more stable than generally reported. Therefore, C. perfringens toxinotyping by PCR can be performed reliably, as the risk of plasmid loss seems to be a minor problem

Managing infertility in primary care

Couples may be reluctant to disclose they are experiencing infertility. Helen Allan and Ginny Mounce provide a discussion on the anxiety couples experience and how to care for these patient

A global disorder of imprinting in the human female germ line

Imprinted genes are expressed differently depending on whether they are carried by a chromosome of maternal or paternal origin. Correct imprinting is established by germline-specific modifications; failure of this process underlies several inherited human syndromes. All these imprinting control defects are cis-acting, disrupting establishment or maintenance of allele-specific epigenetic modifications across one contiguous segment of the genome. In contrast, we report here an inherited global imprinting defect. This recessive maternal-effect mutation disrupts the specification of imprints at multiple, non-contiguous loci, with the result that genes normally carrying a maternal methylation imprint assume a paternal epigenetic pattern on the maternal allele. The resulting conception is phenotypically indistinguishable from an androgenetic complete hydatidiform mole, in which abnormal extra-embryonic tissue proliferates while development of the embryo is absent or nearly so. This disorder offers a genetic route to the identification of trans-acting oocyte factors that mediate maternal imprint establishment

Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment

In this work the affects of laser characteristics on microstructure and microhardness of high velocity oxygen fuel sprayed (HVOF) WC–CoCr coatings were investigated. The coating was deposited with a Sulzer Metco WokaJet™-400 kerosene fuel and the laser surface treatments were applied using CO2 laser with 10.6 μm wavelength. Large variations in surface properties were produced from variation in the laser processing parameters. In total, four levels of peak power (100, 200, 300 and 350 W), four levels of spot diameter (0.2, 0.4, 0.6 and 1 mm) and three levels of pulse repetition frequency (PRF) were investigated. An initial set of tests were followed by a more detailed 33 factorial design of experiments. Pulse repetition frequency and duty cycle were set in order to maintain the same overlap in the x and y directions for the raster scanned sample spot impact dimensions. Overlaps of 30% were used in the initial tests and 10% in the more detailed trials. The results have shown that care must be taken to keep the irradiance at a relatively low level compared to uncoated surfaces. High irradiance can in this case result in rough and porous surfaces. Lower levels of irradiance are shown to provide more uniform microstructures, reduced porosity and increased microhardness

Impact factors of dermatological journals for 1991 – 2000

BACKGROUND: The impact factors of scientific journals are interesting but not unproblematic. It is speculated that the number of journals in which citations can be made correlates with the impact factors in any given speciality. METHODS: Using the Journal Citation Report (JCR) for 1997, a bibliometric analysis was made to assess the correlation between the number of journals available in different fields of clinical medicine and the top impact factor. A detailed study was made of dermatological journals listed in the JCR 1991–2000, to assess the relevance of this general survey. RESULTS: Using the 1997 JCR definitions of speciality journals, a significant linear correlation was found between the number of journals in a given field and the top impact factor of that field (rs = 0.612, p < 0.05). Studying the trend for dermatological journals 1991 to 2000 a similar pattern was found. Significant correlations were also found between total number of journals and mean impact factor (rs = 0.793, p = 0.006), between the total number of journals and the top impact factor (rs = 0.759, p = 0.011) and between the mean and the top impact factor (rs = 0.827, p = 0.003). CONCLUSIONS: The observations suggest that the number of journals available predict the top impact factor. For dermatology journals the top and the mean impact factor are predicted. This is in good agreement with theoretical expectations as more journals make more print-space available for more papers containing citations. It is suggested that new journals in dermatology should be encouraged, as this will most likely increase the impact factor of dermatological journals generally

Similar Genetic Basis of Resistance to Bt Toxin Cry1Ac in Boll-Selected and Diet-Selected Strains of Pink Bollworm

Genetically engineered cotton and corn plants producing insecticidal Bacillus thuringiensis (Bt) toxins kill some key insect pests. Yet, evolution of resistance by pests threatens long-term insect control by these transgenic Bt crops. We compared the genetic basis of resistance to Bt toxin Cry1Ac in two independently derived, laboratory-selected strains of a major cotton pest, the pink bollworm (Pectinophora gossypiella [Saunders]). The Arizona pooled resistant strain (AZP-R) was started with pink bollworm from 10 field populations and selected with Cry1Ac in diet. The Bt4R resistant strain was started with a long-term susceptible laboratory strain and selected first with Bt cotton bolls and later with Cry1Ac in diet. Previous work showed that AZP-R had three recessive mutations (r1, r2, and r3) in the pink bollworm cadherin gene (PgCad1) linked with resistance to Cry1Ac and Bt cotton producing Cry1Ac. Here we report that inheritance of resistance to a diagnostic concentration of Cry1Ac was recessive in Bt4R. In interstrain complementation tests for allelism, F1 progeny from crosses between AZP-R and Bt4R were resistant to Cry1Ac, indicating a shared resistance locus in the two strains. Molecular analysis of the Bt4R cadherin gene identified a novel 15-bp deletion (r4) predicted to cause the loss of five amino acids upstream of the Cry1Ac-binding region of the cadherin protein. Four recessive mutations in PgCad1 are now implicated in resistance in five different strains, showing that mutations in cadherin are the primary mechanism of resistance to Cry1Ac in laboratory-selected strains of pink bollworm from Arizona

Polymorphism in TGFB1 is associated with worse non-relapse mortality and overall survival after stem cell transplantation with unrelated donors.

Transforming growth factor beta-1, encoded by the TGFB1 gene, is a cytokine that plays a central role in many physiological and pathogenic processes. We have sequenced TGFB1 regulatory region and assigned allelic genotypes in a large cohort of hematopoietic stem cell transplantation patients and donors. In this study, we analyzed 522 unrelated donor-patient pairs and examined the combined effect of all the common polymorphisms in this genomic region. In univariate analysis, we found that patients carrying a specific allele, 'p001', showed significantly reduced overall survival (5-year overall survival 30.7% for p001/ p001 patients vs. 41.6% others; P=0.032) and increased non-relapse mortality (1-year nonrelapse mortality: 39.0% vs. 25.4%; P=0.039) after transplantation. In multivariate analysis, the presence of a p001/ p001 genotype in patients was confirmed as an independent factor for reduced overall survival [hazard ratio=1.53 (1.04-2.24); P=0.031], and increased non-relapse mortality [hazard ratio=1.73 (1.06-2.83); P=0.030]. In functional experiments we found a trend towards a higher percentage of surface transforming growth factor beta-1-positive regulatory T cells after activation when the cells had a p001 allele (P=0.07). Higher or lower production of transforming growth factor beta-1 in the inflammatory context of hematopoietic stem cell transplantation may influence the development of complications in these patients. Findings indicate that TGFB1 genotype could potentially be of use as a prognostic factor in hematopoietic stem cell transplantation risk assessment algorithms

Does observability affect prosociality?

The observation of behaviour is a key theoretical parameter underlying a number of models of prosociality. However, the empirical findings showing the effect of observability on prosociality are mixed. In this meta-analysis, we explore the boundary conditions that may account for this variability, by exploring key theoretical and methodological moderators of this link. We identified 117 papers yielding 134 study level effects (Total N = 788, 164) and found a small but statistically significant, positive association between observability and prosociality (r = .141, 95% CI = .106, .175). Moderator analysis showed that observability produced stronger effects on prosociality (1) in the presence of passive observers (i.e., people whose role was to only observe participants) vs perceptions of being watched, (2) when participants decisions were consequential (vs non-consequential), (3) when the studies were performed in the laboratory (as opposed to in the field/online), (4) when studies used repeated measures (instead of single games) and (5) when studies involved social dilemmas (instead of bargaining games). These effects show the conditions under which observability effects on prosociality will be maximally observed. We describe the theoretical and practical significance of 14 these results

Biotic carbon feedbacks in a materially-closed soil-vegetation-atmosphere system

The magnitude and direction of the coupled feedbacks between the biotic and abiotic components of the terrestrial carbon cycle is a major source of uncertainty in coupled climate–carbon-cycle models1, 2, 3. Materially closed, energetically open biological systems continuously and simultaneously allow the two-way feedback loop between the biotic and abiotic components to take place4, 5, 6, 7, but so far have not been used to their full potential in ecological research, owing to the challenge of achieving sustainable model systems6, 7. We show that using materially closed soil–vegetation–atmosphere systems with pro rata carbon amounts for the main terrestrial carbon pools enables the establishment of conditions that balance plant carbon assimilation, and autotrophic and heterotrophic respiration fluxes over periods suitable to investigate short-term biotic carbon feedbacks. Using this approach, we tested an alternative way of assessing the impact of increased CO2 and temperature on biotic carbon feedbacks. The results show that without nutrient and water limitations, the short-term biotic responses could potentially buffer a temperature increase of 2.3 °C without significant positive feedbacks to atmospheric CO2. We argue that such closed-system research represents an important test-bed platform for model validation and parameterization of plant and soil biotic responses to environmental changes