67,674 research outputs found
Progress report 3 of cooperative program for design, fabrication, and testing of high modulus composite helicopter shafting
This report describes the third phase of work, the objective of which was to overcome the excessive brittleness of the previously developed UH-1 helicopter tail rotor drive shaft design which demonstrated a shaft train weight savings of 53.1% over the current 2024-T3 aluminum shaft train. A materials impact program demonstrated exceptionally noteworthy performance of two woven constructions containing E-glass and PRD 49-III (designation later changed to KEVLAR 49) fibers in an epoxy resin matrix. Thermoplastic matrices and PRD 49-III fiber provided impact resistance at low weight which was superior to composites having the same fiber in a thermoset resin matrix. A design, fabrication, and test program showed that shaft impact resistance could be improved over the previously developed graphite composite design at a cost in shaft train rate savings. The shaft train weight savings of the most impact tolerant construction was 4.0% over the current aluminum shaft train. Alternating plies of graphite and glass appear to provide substantially greater tube impact durability than that provided by hybridization of the two fibers into one tape wound to a ply design equivalent in strength and stiffness to that of the alternating ply design. Recommendations were made to continue research work to exploit the potential for more impact-durable structures through the use of KEVLAR 49 fiber, woven structures, thermoplastic matrices and THORNEL 50-S/KEVLAR 49 blends with thermoset matrices
An optimal system design process for a Mars roving vehicle
The problem of determining the optimal design for a Mars roving vehicle is considered. A system model is generated by consideration of the physical constraints on the design parameters and the requirement that the system be deliverable to the Mars surface. An expression which evaluates system performance relative to mission goals as a function of the design parameters only is developed. The use of nonlinear programming techniques to optimize the design is proposed and an example considering only two of the vehicle subsystems is formulated and solved
Approximate solutions for the single soliton in a Skyrmion-type model with a dilaton scalar field
We consider the analytical properties of the single-soliton solution in a
Skyrmion-type Lagrangian that incorporates the scaling properties of quantum
chromodynamics (QCD) through the coupling of the chiral field to a scalar field
interpreted as a bound state of gluons. The model was proposed in previous
works to describe the Goldstone pions in a dense medium, being also useful for
studying the properties of nuclear matter and the in-medium properties of
mesons and nucleons. Guided by an asymptotic analysis of the Euler-Lagrange
equations, we propose approximate analytical representations for the single
soliton solution in terms of rational approximants exponentially localized.
Following the Pad\'e method, we construct a sequence of approximants from the
exact power series solutions near the origin. We find that the convergence of
the approximate representations to the numerical solutions is considerably
improved by taking the expansion coefficients as free parameters and then
minimizing the mass of the Skyrmion using our ans\"atze for the fields. We also
perform an analysis of convergence by computation of physical quantities
showing that the proposed analytical representations are very useful useful for
phenomenological calculations.Comment: 13 pages, 3 eps figures, version to be published in Phys.Rev.
Integration of crosswind forces into train dynamic modelling
In this paper a new method is used to calculate unsteady wind loadings acting on a railway vehicle. The method takes input data from wind tunnel testing or from computational fluid dynamics simulations (one example of each is presented in this article), for aerodynamic force and moment coefficients and combines these with fluctuating wind velocity time histories and train speed to produce wind force time histories on the train. This method is fast and efficient and this has allowed the wind forces to be applied to a vehicle dynamics simulation for a long length of track.
Two typical vehicles (one passenger, one freight) have been modelled using the vehicle dynamics simulation package ‘VAMPIRE®’, which allows detailed modelling of the vehicle suspension and wheel—rail contact. The aerodynamic coefficients of the passenger train have been obtained from wind tunnel tests while those of the freight train have been obtained through fluid dynamic computations using large-eddy simulation. Wind loadings were calculated for the same vehicles for a range of average wind speeds and applied to the vehicle models using a user routine within the VAMPIRE package. Track irregularities measured by a track recording coach for a 40 km section of the main line route from London to King's Lynn were used as input to the vehicle simulations.
The simulated vehicle behaviour was assessed against two key indicators for derailment; the Y/Q ratio, which is an indicator of wheel climb derailment, and the Δ Q/Q value, which indicates wheel unloading and therefore potential roll over. The results show that vehicle derailment by either indicator is not predicted for either vehicle for any mean wind speed up to 20 m/s (with consequent gusts up to around 30 m/s). At a higher mean wind speed of 25 m/s derailment is predicted for the passenger vehicle and the unladen freight vehicle (but not for the laden freight vehicle)
A Green's function formulation for a nonlinear potential flow solution applicable to transonic flow
Routine determination of inviscid subsonic flow fields about wing-body-tail configurations employing a Green's function approach for numerical solution of the perturbation velocity potential equation is successfully extended into the high subsonic subcritical flow regime and into the shock-free supersonic flow regime. A modified Green's function formulation, valid throughout a range of Mach numbers including transonic, that takes an explicit accounting of the intrinsic nonlinearity in the parent governing partial differential equations is developed. Some considerations pertinent to flow field predictions in the transonic flow regime are discussed
Identifying the causal mechanisms of the quiet eye
Scientists who have examined the gaze strategies employed by athletes have determined that longer quiet eye (QE) durations (QED) are characteristic of skilled compared to less-skilled performers. However, the cognitive mechanisms of the QE and, specifically, how the QED affects performance are not yet fully understood. We review research that has examined the functional mechanism underlying QE and discuss the neural networks that may be involved. We also highlight the limitations surrounding QE measurement and its definition and propose future research directions to address these shortcomings. Investigations into the behavioural and neural mechanisms of QE will aid the understanding of the perceptual and cognitive processes underlying expert performance and the factors that change as expertise develops
A fuselage/tank structure study for actively cooled hypersonic cruise vehicles, summary
A detailed analytical study was made to investigate the effects of fuselage cross section (circular and elliptical) and the structural arrangement (integral and nonintegral tanks) on aircraft performance. The vehicle was a 200 passenger, liquid hydrogen fueled Mach 6 transport designed to meet a range goal of 9.26 Mn (5000 NM). A variety of trade studies were conducted in the area of configuration arrangement, structural design, and active cooling design in order to maximize the performance of each of three point design aircraft: (1) circular wing-body with nonintegral tanks, (2) circular wing-body with integral tanks and (3) elliptical blended wing-body with integral tanks. Aircraft range and weight were used as the basis for comparison. The resulting design and performance characteristics show that the blended body integral tank aircraft weights the least and has the greatest range capability, however, producibility and maintainability factors favor nonintegral tank concepts
Gravitational waves from black hole collisions via an eclectic approach
We present the first results in a new program intended to make the best use
of all available technologies to provide an effective understanding of waves
from inspiralling black hole binaries in time for imminent observations. In
particular, we address the problem of combining the close-limit approximation
describing ringing black holes and full numerical relativity, required for
essentially nonlinear interactions. We demonstrate the effectiveness of our
approach using general methods for a model problem, the head-on collision of
black holes. Our method allows a more direct physical understanding of these
collisions indicating clearly when non-linear methods are important. The
success of this method supports our expectation that this unified approach will
be able to provide astrophysically relevant results for black hole binaries in
time to assist gravitational wave observations.Comment: 4 pages, 3 eps figures, Revte
- …