Optimization of force-limiting seismic devices connecting structural subsystems

This paper is focused on the optimum design of an original force-limiting floor anchorage system for the seismic protection of reinforced concrete (RC) dual wall-frame buildings. This protection strategy is based on the interposition of elasto-plastic links between two structural subsystems, namely the lateral force resisting system (LFRS) and the gravity load resisting system (GLRS). The most efficient configuration accounting for the optimal position and mechanical characteristics of the nonlinear devices is obtained numerically by means of a modified constrained differential evolution algorithm. A 12-storey prototype RC dual wall-frame building is considered to demonstrate the effectiveness of the seismic protection strategy

Shell-supported footbridges

Architects and engineers have been always attracted by concrete shell structures due to their high efficiency and plastic shapes. In this paper the possibility to use concrete shells to support footbridges is explored. Starting from Musmeci's fundamental research andwork in shell bridge design, the use of numerical formfinding methods is analysed. The form-finding of a shellsupported footbridge shaped following Musmeci's work is first introduced. Coupling Musmeci's and Nervi's experiences, an easy construction method using a stay-inplace ferrocement formwork is proposed. Moreover, the advantage of inserting holes in the shell through topology optimization to remove less exploited concrete has been considered. Curved shell-supported footbridges have been also studied, and the possibility of supporting the deck with the shell top edge, that is along a single curve only, has been investigated. The form-finding of curved shell-supported footbridges has been performed using a Particle-Spring System and Thrust Network Analysis. Finally, the form-finding of curved shell-supported footbridges subjected to both vertical and horizontal forces (i.e. earthquake action) has been implemented

Curved footbridges supported by a shell obtained through thrust network analysis

After Maillart's concrete curved arch bridges were built before the Second World War, in the second half of the past century and this century, many curved bridges have been built with both steel and concrete. Conversely, since the construction of Musmeci's shell supported bridge in Potenza, few shell bridges have been constructed. This paper explains how to design a curved footbridge supported by an anticlastic shell by shaping the shell via a thrust network analysis (TNA). By taking advantage of the peculiar properties of anticlastic membranes, the unconventional method of shaping a shell by a TNA is illustrated. The shell top edge that supports the deck has an assigned layout, which is provided by the road curved layout. The form of the bottom edge is obtained by the form-finding procedure as a thrust line, by applying the thrust network analysis (TNA) in a non-standard manner, shaping the shell by applying the boundary conditions and allowing relaxation. The influence of the boundary conditions on the bridge shape obtained as an envelope of thrust lines is investigated. A finite element analysis was performed. The results indicate that the obtained shell form is effective in transferring deck loads to foundations via compressive stresses and taking advantage of concrete mechanical properties

energetic and economic analysis of a new concept of solar concentrator for residential application

Abstract Renewable energy penetration is increasing in last years, covering a more and more important role in both electrical and thermal supply. Nowadays, the photovoltaic conversion is a consolidated technology and can be efficiently combined with solar concentration. In this study, a new concept of photovoltaic solar concentrator based on non-conventional mirrors coupled with high efficiency triple-junctions cells is described and discussed. More in details, as for the optical design, deformations are applied to classical spherical mirrors to control solar aberrations and boost efficiency of a receiver consisting in a dense array of cells. The efficiency enhance is obtained by high matching between the collected solar irradiance and the receiver electrical features. The concentrator is able to produce both electrical and thermal energy: the system requires in fact an active cooling circuit to maintain the cells performance. This behavior makes the system suitable for combined heat and power applications with particular reference to high direct irradiance environments. An analytical study, considering a residential utility has been performed in order to understand the energetic and economic performance of the system. In particular, a simulation has been carried out by the use of an in-house-developed calculation code considering a whole year of operation

How Many Templates for GW Chirp Detection? The Minimal-Match Issue Revisited

In a recent paper dealing with maximum likelihood detection of gravitational wave chirps from coalescing binaries with unknown parameters we introduced an accurate representation of the no-signal cumulative distribution of the supremum of the whole correlator bank. This result can be used to derive a refined estimate of the number of templates yielding the best tradeoff between detector's performance (in terms of lost signals among those potentially detectable) and computational burden.Comment: submitted to Class. Quantum Grav. Typing error in eq. (4.8) fixed; figure replaced in version

SMEs and Certified Management Standards: The Effect of Motives and Timing on Implementation and Commitment

Existing research on certifiable management standards (CMS) and corporate social responsibility (CSR) tends to focus on large companies and is characterised by disagreement about the role of these standards as drivers of CSR. We contribute to the literature by shifting the analytical focus to the behaviour of small and medium-sized enterprises (SMEs) that subscribe to multiple CSR related standards. We argue that, in respect of motive and commitment, SMEs are not as different from large companies as the literature suggests, as they are guided by similar institutional and economic motives. Results, based on ISO 9001, ISO 14001 and OHSAS 18001 certified SMEs in Greece, demonstrate that later adopters are more susceptible to coercive and mimetic motives and are less likely to commit fully to the CMS requirements, while earlier adopters react to normative motives and considerations of internal efficiency gains and tend to carry out CMS requirements with greater diligence

NICMOS Imaging of the Host Galaxies of z ~ 2 - 3 Radio-Quiet Quasars

We have made a deep NICMOS imaging study of a sample of 5 z ~ 2 - 3 radio-quiet quasars with low absolute nuclear luminosities, and we have detected apparent host galaxies in all of these. Most of the hosts have luminosities approximately equal to present-day L*, with a range from 0.2 L* to about 4 L*. These host galaxies have magnitudes and sizes consistent with those of the Lyman break galaxies at similar redshifts and at similar rest wavelengths, but are about two magnitudes fainter than high-z powerful radio galaxies. The hosts of our high-z sample are comparable to or less luminous than the hosts of the low-z RQQs with similar nuclear absolute magnitudes. However, the high z galaxies are more compact than the hosts of the low z quasars, and probably have only 10 - 20% of the stellar mass of their low-z counterparts. Application of the M(bulge)/M(BH) relation found for present-day spheroids to the stellar masses implied for the high z host galaxies would indicate that they contain black holes with masses around 10^8 Msolar. Comparison to their nuclear magnitudes implies accretion rates that are near or at the Eddington limit. Although these high z hosts already contain supermassive black holes, the galaxies will need to grow significantly to evolve into present-day L* galaxies. These results are basically consistent with theoretical predictions for the hierarchical buildup of the galaxy host and its relation to the central supermassive black hole.Comment: 25 pages, 13 figures, accepted for publication in Ap