100 research outputs found

    Influence of non-local thermodynamic equilibrium and Zeeman effects on magnetic equilibrium reconstruction using spectral motional Stark effect diagnostic

    Get PDF
    The Motional Stark Effect (MSE) diagnostic is a well established technique to infer the local internal magnetic field in fusion plasmas. In this paper, the existing forward model which describes the MSE data is extended by the Zeeman effect, fine-structure, and relativistic corrections in the interpretation of the MSE spectra for different experimental conditions at the tokamak ASDEX Upgrade. The contribution of the non-Local Thermodynamic Equilibrium (non-LTE) populations among the magnetic sub-levels and the Zeeman effect on the derived plasma parameters is different. The obtained pitch angle is changed by 3°…4° and by 0.5°…1° including the non-LTE and the Zeeman effects into the standard statistical MSE model. The total correction is about 4°. Moreover, the variation of the magnetic field strength is significantly changed by 2.2% due to the Zeeman effect only. While the data on the derived pitch angle still could not be tested against the other diagnostics, the results from an equilibrium reconstruction solver confirm the obtained values for magnetic field strength

    Objective measurement of sedentary behaviour using accelerometers

    Get PDF
    Background: Sedentary behaviour (SB) is an important risk factor for a number of chronic diseases. Although gaps remain in our knowledge of the elements of SB most associated with reduced health outcomes, measuring SB is important, especially in less active patient populations where treatment-related changes may be seen first in changes in SB.Methods: We review current published work in the measurement of SB to make recommendations for SB measurement in clinical studies.Results: To help move our understanding of the area forward, we propose a set of derived measures of SB that can be easily understood and interpreted.Conclusion: Although there is more work required to determine and validate the most clinically relevant and sensitive measures of SB, there is enough understanding of how to measure SB to enable its inclusion in study protocols

    Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

    Get PDF
    The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

    Mobilise-D insights to estimate real-world walking speed in multiple conditions with a wearable device

    Get PDF
    This study aimed to validate a wearable device’s walking speed estimation pipeline, considering complexity, speed, and walking bout duration. The goal was to provide recommendations on the use of wearable devices for real-world mobility analysis. Participants with Parkinson’s Disease, Multiple Sclerosis, Proximal Femoral Fracture, Chronic Obstructive Pulmonary Disease, Congestive Heart Failure, and healthy older adults (n = 97) were monitored in the laboratory and the real-world (2.5 h), using a lower back wearable device. Two walking speed estimation pipelines were validated across 4408/1298 (2.5 h/laboratory) detected walking bouts, compared to 4620/1365 bouts detected by a multi-sensor reference system. In the laboratory, the mean absolute error (MAE) and mean relative error (MRE) for walking speed estimation ranged from 0.06 to 0.12 m/s and − 2.1 to 14.4%, with ICCs (Intraclass correlation coefficients) between good (0.79) and excellent (0.91). Real-world MAE ranged from 0.09 to 0.13, MARE from 1.3 to 22.7%, with ICCs indicating moderate (0.57) to good (0.88) agreement. Lower errors were observed for cohorts without major gait impairments, less complex tasks, and longer walking bouts. The analytical pipelines demonstrated moderate to good accuracy in estimating walking speed. Accuracy depended on confounding factors, emphasizing the need for robust technical validation before clinical application. Trial registration: ISRCTN – 12246987

    A core outcome set for pre‐eclampsia research: an international consensus development study

    Get PDF
    Objective To develop a core outcome set for pre‐eclampsia. Design Consensus development study. Setting International. Population Two hundred and eight‐one healthcare professionals, 41 researchers and 110 patients, representing 56 countries, participated. Methods Modified Delphi method and Modified Nominal Group Technique. Results A long‐list of 116 potential core outcomes was developed by combining the outcomes reported in 79 pre‐eclampsia trials with those derived from thematic analysis of 30 in‐depth interviews of women with lived experience of pre‐eclampsia. Forty‐seven consensus outcomes were identified from the Delphi process following which 14 maternal and eight offspring core outcomes were agreed at the consensus development meeting. Maternal core outcomes: death, eclampsia, stroke, cortical blindness, retinal detachment, pulmonary oedema, acute kidney injury, liver haematoma or rupture, abruption, postpartum haemorrhage, raised liver enzymes, low platelets, admission to intensive care required, and intubation and ventilation. Offspring core outcomes: stillbirth, gestational age at delivery, birthweight, small‐for‐gestational‐age, neonatal mortality, seizures, admission to neonatal unit required and respiratory support. Conclusions The core outcome set for pre‐eclampsia should underpin future randomised trials and systematic reviews. Such implementation should ensure that future research holds the necessary reach and relevance to inform clinical practice, enhance women's care and improve the outcomes of pregnant women and their babies
    corecore